Question about 2006 Ford Focus

1 Answer

I have a 5dr ford fusion with a brake light that goes on -on turns

I have a european ford fusion - 5dr hatchback 2002 model. Every time I take a right turn my brake light (the circle with the exclamation mark) goes on. Anyone have any idea what this means?

Posted by on

  • kathmy1 Oct 21, 2008

    Actually it was my front brake pads - I was losing brake fluid and once I changed them the problem went away - thanks for your help.

×

1 Answer

Possible the brake line is being crimped. Need to look under the wheel and turn it to the right to see what is going on.

Posted on Oct 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to find the earthing point on my ford fusion?


The earthing point goes from the bulb holder to the chassis of the car, try connecting the metal bulb holder surround with a piece of wire, if OK make it a permanent connection.

Feb 09, 2015 | 2005 Ford Fusion 1.6

2 Answers

How do I disconnect the park on the 2006 Ford Fusion when the brake lights not working, I know the brake lights must work for me to get the car out of park and that there is a button beside the gear s


i would advise checking the brake light switch , this is located at the top of the brake pedal, disconnect the wire and turn the switchclockwise one full turn , reconnect the wire and check the lights , you may have to repeat this a few times until the adjustment is just right , very uncommon for both brake lights to go at same time , hope this helps you

Nov 25, 2014 | 2006 Ford Fusion

1 Answer

2010 fusion tail lights won't turn off


I suggest check brake switch, underdash, top back side brake pedal or some short/ground there.

Apr 23, 2012 | 2010 Ford Fusion 3.5

1 Answer

I have a 1994 Land Rover Discovery V8i, 5dr. The rear side lights in the light cluster do not work. There is a second row of lights on the bumper bar that do work. I have been told that with this model...


Hello! The 1994 models featured larger headlamps and a second set of rear lights in the bumper. The new rear lights had the wiring changed several times to meet real or expected European safety legislation. Some vehicles are left with an arrangement where the vulnerable bumper contains the only working lights. The rear side lights in the light cluster become non-operational...


Guru.......Saailer

May 18, 2011 | 1994 Land Rover Discovery

3 Answers

How to overide limp mode in 2006 ford fusion


put the key in the ignition, and turn it so the lights and everything come on, do not start the engine, then pump the brakes 3 times, turn it off, and then start the engine. This worked for my 2008 for fusion. (if the brakes don't work, try the gas 3 times make sure the engine is off and the car is in park)
Best of luck!

Mar 01, 2011 | 2006 Ford Fusion

1 Answer

My heated seat in my 2006 ford fusion won't turn on when engine is started it lights up and goes off. it lights up only right after starting


You really need a scanner to diagnose, along
with the service manual
Most likely a bad under seat blower assy.
Do you hear it running? Listen to the other side

Jan 27, 2011 | 2006 Ford Fusion

1 Answer

I have a 52 plate ford fusion and i don't know how to change the brake light bulb


please explain what a 52 plate is as i dont live in this third world ethnic majority country that uses codes for the year of a car ,if its basic fusion about 5 yrs old then the light just clips off if i have the right model

Dec 24, 2010 | 2004 Ford Fusion

1 Answer

Engine light after dead car


try cleaning the battery terminals first and see what happens

Jun 04, 2010 | 2006 Ford Fusion

1 Answer

Ford Fusion 04 Engine Management Light


I had a 2002 model 1.4 Fiesta, same problem Engine management light or ECA, electronic accelaration Control (EAC), it needs a ford dealer to do a computer diagnostic, most likely that it will need replaced.

Mt friend who is a mechanic for ford said that it was a common factory fault and is very common in 1.4 zetec /duratec petrol models.

I now have a 2007 Fusion and was quick to see if this problem had been sorted on this model, and it has!!

Hope this helps!!

Nov 19, 2008 | 2004 Ford Fusion

1 Answer

Trailer Connections


I took the vehicle to Bosch, an electrical expert in Germany.

Jun 28, 2008 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
2006 Ford Focus Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...