Question about 1996 Hyundai Accent

1 Answer

SHIFT CABLE CLUTCH MOVES FINE WILL TRY TO PUT INTO GEAR WILL ON GO IN TO THIRD GEAR PART IS IMPOSSIBLE TO FIND, HELP!

Posted by on

  • 1 more comment 
  • CULLENMONICA Oct 13, 2008

    YEAH, I TRIED THEM THEY WANT 180 FOR THE PART IS THAT GOOD OR AM I BEING HOSED?

  • CULLENMONICA Oct 13, 2008

    THANKS SO MUCH I GOING TO CHECK THAT OUT YOU'RE A GREAT HELP.

  • yadayada
    yadayada May 11, 2010

    I know this is a dealer only part, have you tried the dealer??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 64,286 Answers

That sounds about right, since they are the only game in town do you really have a choice, one other option look on line for a better price many dealers have on line parts discounts, I used to get parts from a store in AZ for about 40% less than the dealer. I worked in a dealer that sold Hyundai, we were really surprised how expensive parts were, an example is this, a new engine computer for a GM car was $125.00, for a Hyundai $1000.00, and that's not a typo.

Posted on Oct 13, 2008

  • yadayada
    yadayada Oct 13, 2008

    Could you please rate me if the info was useful, thanks!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does manual transmission no longer shift, and is making air leak noise?


i bet it does shift in to gear, if you start engine in 1st or REV.gear.right.
if you start engine in gear, with clutch depressed, and the car moves
that means clutch failure.
it can be a bad clutch linkage, easy fix.
there are 2 systems. (3 on relics) cable and a hydraulic acuator.

i can never tell what others can do, some cant tie shoe laces others fly to moon..
im laces.
im too lazy no wto look up the linkage on yours.
why not just look.
see clutch master cylinder above pedal on fire wall?
that is hyd. if missing and is cable ? bingo cable system.

cable play never set ever? do so now, called free play.
if cable end moves 1inch its good.
if the slave cylinder dont move it or or the MC is bad. replace both,
both are easy fixed, ask.
.

Jun 05, 2014 | 1998 Subaru Impreza

1 Answer

Wont shift to third gear


There is a problem with the gearbox or clutch. The gearbox will have to be removed and the clutch inspected, then it may need a new clutch or gearbox.

Dec 20, 2013 | 2006 Suzuki Forenza

1 Answer

1999 escort manuel tranny wont shift into third gear all others are fine


sounds like the synchro went bad for 3rd gear. if all other gears work fine, i would suspect the synchros inside the transmission are starting to fail.

Jun 11, 2013 | Cars & Trucks

1 Answer

98 chevy cavalier z24 will not shift into fifth gear nor reverse


Hey I have a 1999 cavalier z24 5spd All my gears work except 5th while puttting it into 5ht gear as i let out of the clutch its grinding so i cannto put in 5th or it will grind, but at times it would work, but recently as Ive been driving I go to put it in 5th, there isn't a grind its as 5th gear is just netural NEED HELP geoff

Jan 14, 2012 | Cars & Trucks

1 Answer

I have a manual 4-speed and will not shift into gear when the van is running


sounds like you have a worn out clutch. if you put it in gear and then put your foot on the clutch and try to start it what happens? if it moves as you try to start that means you have no clutch. you would have to see if it is hydraulic or cable if hydraulic you may just need to bleed it or replace the master or slave cylinders if they are leaking. master cylinder is under bonnet and slave is on the side of your gearbox. if cable you may have a broken cable.

Jan 08, 2011 | 1988 Ford Econoline

1 Answer

It is a five speed and it want go into gear and stay in gear


Does your clutch pedal move in and out freely?Or is it to the floor?If it's to the floor then it's your clutch slave cylinder.This is a weak point on most 5 speeds it seems.Also check your fluid.If it stays up and moves,then it is most likely in your tranny.This is your synchros.You could also check your cable and make sure it is adjusted,If it gets out of line then it can make it hard or impossible to shift.Hope this help get you somewhere.

Apr 17, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

1989 Mazda mx-6=gear shift


This make and model has hydraulic clutch.Most likely clutch master or slave cylinder gone bad.Look to see if any fluid is leaking out of slave cylinder,or clutch master.There may not be any,but this would help decide witch one to replace if there was one leaking.This would be the problem,one or the other.If I can help,let me know.

Aug 24, 2009 | 1989 Mazda MX-6

1 Answer

2001 saturn sc1 grinds when going into third gear


sounds like you got a bad shift syncro for 3rd gear, its inside the trans,cuse ive never adjust shift cables on a s-series now matter what was done to the trans,and that cable controls more than just 3rd gear so its gotta be the syncro,,sorry,,,cheaper to get a used trans than to fix

Jul 30, 2009 | 2001 Saturn SC

2 Answers

MY TRANS WONT SHIFT INTO THIRD GEAR UNTIL IM DOING 45 MPH IT SHIFTS FINE IN FIRST AND SECOND GEAR WHEN IT IS IN SECOND GEAR AND WONT SHIFT TO THIRD I CAN PUT IT IN N AND BACK TO OVERDRIVE THEN IT SHIFTS.


Most likely your shift cable (from the selector to the transmission) is worn, maybe needs lubrication. Mine had a similiar problem, but had to shift it into neutral and back up to get it in reverse. A new shift cable solved the problem.

Jul 27, 2009 | Lincoln Town Car Cars & Trucks

2 Answers

1987 Suzuki Samurai Clutch problem.


Adjusted Clutch cable assembly under passenger side of vehicle. Had assistance from friend depressing clutch pedal and engaging shift lever. Problem went away

Mar 18, 2009 | 1987 Suzuki Samurai

Not finding what you are looking for?
1996 Hyundai Accent Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...