Question about 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

Check engine light

Dodge ram 07 4wd gas engine bpd code p0524 need to know what it means

Posted by on

  • terrywilliam May 11, 2010

    my oil pressure is fine. could it be my pcv valve?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

Oil pressure too low...it must remain above 23.2 psi for the multi displacement system to work...it could be any thing from low or incorrect oil to a powertrain controller..you may need the dealerships help

Posted on Nov 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge ram gas cap light and check engine light on at the same time p0456 and p0457


456 is a small evap leak check hoses to evap canister by fuel tank.

Oct 10, 2014 | Dodge Ram 1500 Cars & Trucks

1 Answer

My 2007 Dodge ram 1500 with hemi has 2 codes po524 and po406 are they related


In both cases, there is a software update available for this condition. It involves having the dealer connector their StarScan tool to your truck and reprogramming the PCM.

DTC P0406 - EGR Sensor "A" circuit "High"
There is updated software available for your PCM that will correct this code if your vehicle was built prior to mid February 07. If it was built after that, then the EGR valve will need replacing (this is not unusual). Keep in mind that could be time for a new valve, but you dont will need to change the tube, but new gaskets are a good idea.

DTC P0524 - Oil Pressure Too Low Oil pressure sending unit (sensor) voltage input above the maximum acceptaple voltage.
If the software is up to date, then have the oil pressure sensing unit must be replaced.

Additionally, check this TSB SUPERSEDES TECHNICAL SERVICE BULLETIN 18-044-07, DATED OCTOBER 12, 2007, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL
REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE THE ADDITION OF YEARS, MODELS AND CLEAN DATES.
THE StarSCAN FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.
StarSCAN SOFTWARE LEVEL MUST BE AT RELEASE 8.04 OR HIGHER FOR THIS BULLETIN.
StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO BE USED TO PERFORM THIS PROCEDURE.
SUBJECT:
Flash: MIL Illumination Due To Diagnostic Trouble Code P0524 - Engine Oil Pressure Too Low
OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control
Module (PCM) with new software.
MODELS:
**2007** - 2008 (DR/DH/DC/D1) Ram Truck (1500/2500/3500)
**2007** - 2008 (HB / HG) Durango / Aspen
**2007** - 2008 (LX) 300 / Magnum / Charger
**2007 (LE) 300C/300 Touring (International Markets)**
**2007 (L2) 300 (China)**
**2007** - 2008 (WK) Grand Cherokee
**2007 - 2008 (WH) Grand Cherokee (International Markets)**
**2007** - 2008 (XK) Commander
**2007 - 2008 (XH) Commander (International Markets)**
NUMBER: 18-003-08
GROUP: Vehicle Performance
DATE: January 19, 2008
NOTE: This bulletin applies to the above listed vehicles equipped with a 5.7L engine with MDS (sales code EZB) built before the following dates:
(HB/HG) built before August 15, 2007 (MDH 0814XX)
(LX) built before September 14, 2007 (MDH 0914XX)
(DR) built before August 16, 2007 (MDH 0816XX)
**(WK/WH/XK/XH) built before January 8, 2008 (MDH 0108XX)**
SYMPTOM/CONDITION:
The vehicle operator may experience a Malfunction Indicator Lamp (MIL) illumination due to the following Diagnostic Trouble Code (DTC): P0524 - Engine Oil Pressure Too Low

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Feb 14, 2012 | 2007 Dodge Ram Truck

1 Answer

Computer is showing a PO524 code.


I know in the 2008 models there was a problem to where you had to have a update done through a scanner (called a reflash I think). P0524 means low oil pressure. Pretty sure this TSB was for Rams from like 2002 - 2008 but don't quote me on that.

Feb 05, 2011 | 2007 Dodge Ram 1500 Quad Cab Sport

2 Answers

Have code on the odometer "9ASCAP" or possibly "9RSCRP". What does this mean? It seems to run fine.


It actually says GASCAP. Just turn off the engine, Remove the gas cap and replace it, making sure to turn it more than you think you need to close the cap. You may need to purchase a new gas cap because the seal is old.

Nov 21, 2010 | 2006 Dodge Ram 1500

1 Answer

2006 dodge ram hemi 5.7 liter trouble codes 1404 and 405 and check engine light on


The check engine light is on to tell you that the ECU has detected a fault. The faults are stored as codes. The codes both have to do with a deficiency of exhaust gas going through the EGR valve. You will need to find out if the problem has to do with the valve, a leak, or the circuit.

May 20, 2010 | Cars & Trucks

2 Answers

2001 Dodge Ram 1500 4x4 engine light on and code reads P0455 could U please tell me what that means? thanks


Evaporative Emission System Leak Detected (large leak)
Is the gas cap missing or loose?

Dec 01, 2009 | 2001 Dodge Ram 1500 Truck 2WD

3 Answers

Gas Cap Error with Check Engine light


By "Replace the gas cap", do you mean put it back on, or buy another one? If you fuel these trucks with the engine running, or don't tighten the gas cap, the light will come on. It will also come on when the seal in your gas cap goes bad. I have had to replace the gas cap on my jeep and dodge already. It fixed the problem both times.

Jul 07, 2009 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

2002 Dodge Ram Gas Engine. Check Engine light


check your antifreez . that would make check engine light come on and no heat

Jul 05, 2009 | 2002 Dodge Ram Maxi

5 Answers

Diagnostic code P0456 for 2003 Dodge Ram 1500 5.7


P0456 = EVAP Emissions Control System Leak Very Small

Is the gas cap on tight or is the seal damaged? If it needs replacement, get it from the dealer.

Aug 22, 2008 | 2004 Dodge Ram 1500

1 Answer

Check Engine Light


almost any thing will bring the light on, like if you go get fuel and fill the tank with truck runing it will turn the light on
it does not mean than it is not safe to drive but you need to go to an auto repair and have them conect the scan tool to see what code is present i will recomend to take care of it because with the light on you might notice or get a decrease in gas mileage and fuel is so expensive now

May 31, 2008 | 2005 Dodge Ram 1500

Not finding what you are looking for?
2007 Dodge Ram 1500 Quad Cab Sport Logo

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...