Question about 2002 Chrysler Sebring

1 Answer

Malfunction indicator lights

The malfunction indicator lights stays on could it be the bad gas

Posted by on

  • 1 more comment 
  • ehhansen Nov 06, 2008

    My oil indicator light flickers at idle, my airbag light goes on and off depending on whether or not I hit a bump/pothole (has been previously repaired by dealer, but IT"S BACK), check egine light on (code was small evap leak and dealer told me he would have to drop the tranny to check for it) and now my fuel indicator light will fall to low fuel even tho I just filled up. Any suggestions or just enjoy looking at all the pretty lights when I drive. :D

  • Anonymous Mar 16, 2014

    No right hand indicator and left hand indicator is on all the time when no indicators should be working.

  • Anonymous Mar 17, 2014

    malfunction light was on for 2 days. Then it went off and stayed off.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Have the car scanned at AutoZone for codes in the computer (it's free - a dealer will charge you). Post the codes here and I can help you. There are a ton of things that could cause the problem you have - the codes are essential to figuring out the problem.

Posted on Oct 23, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why would my OBD or malfunction indicator light come on and stay on?

Check engine light comes on with faulty oxygen sensor, loose gas cap or faulty gas cap. sometimes with low octane fuel as well. fill up with high octane fuel, tighten down the cap and see if it helps.

Jul 14, 2015 | Cars & Trucks

1 Answer

Wiring diagram of malfunction indicator light for subaru forester 2002 (lamp just came on)?

Could be all sorts of things. Have a garage or a dealer read the ECU error code to see what is be flagged.

Might be as simple as the gas cap is not tight.

Apr 27, 2014 | 2002 Subaru Forester

1 Answer

Caravan malfunction indicator light

2014 dodge caravan dash tail light indicator stays on. Is there a problem

Jul 10, 2013 | Dodge Cars & Trucks

1 Answer

Why does my fuel gauge stay on when I have a full tank of gas?

Your ECU could be fouling up, Could have a short or ground, gas sending unit could be malfunctioning, Autozone can put a ECU checker on your system and it should indicate possible causes

May 02, 2012 | 2004 Nissan Maxima

1 Answer

Malfunction Indicator light stays on on my 2006 Jeep Liberty.\r\nCar runs fine but light has stayed on when operating. I have checked gas cap. How can I turn off dashboard indicator light?

Mil light is coming on because it's registering a dtc (diagnostic trouble code) may or may not be evap/fuel vapor discharge like a loose or faulty seal in your gas cap. Have codes checked at an auto parts store (for free) and they can tell you what code/codes are showing. List them here for solutions. You can also have them erase code and if mil lamp comes on again you know somethings to blame and you need to check it out.

Dec 10, 2010 | 2006 Jeep Liberty

1 Answer

Malfunction Indicator light

usually a sensor has gone bad. have it check by a mechanic on the computer.

Mar 29, 2010 | 2003 Subaru Forester

1 Answer

VSC and Malfunction Indicator came on and stays on

When you say malfunction indicator , do you mean `check engine`` light.
These paired lights can indicate a change in engine air flow and fuel mixture. Try a fresh tank of premium fuel, but first a unscrew and re-screw the gas cap until it ratchets into place. The lights can be triggered by a loose gas cap, a fouled O2 sensor, and several other emission related problems including sticking throttle body components, etc.
This can sometimes be sprayed with carb cleaner inserted in the snorkle area of the air intake where teh snorkle meets the metal intake.

Dec 07, 2009 | 2008 Lexus Rx 350

2 Answers

Check Engine Light Stays On

bad gas cap
O2 sensor bad
also could be a bad air valve or air line leak

Apr 10, 2009 | 2006 Dodge Caravan

1 Answer

Malfunction indicator light is on 2002 santa fe hyuandi

That sounds like the egr valve, or egr solonoid.
(Exhaust gas recirculation). Have them checked, could be one or both bad.

Jan 22, 2009 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
2002 Chrysler Sebring Logo

Related Topics:

691 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides