Question about Land Rover Discovery

3 Answers

Indicator flashing 2 fast at off side all bulds illuminating

Posted by on

  • Anonymous Mar 22, 2014

    when operating the indicators, either side, the outside indicator lamps flash normally, but on the instrument panel they flash very fast.. any ideas please.. cheers

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

Double check all bulbs are illuminationg (including the side repeaters / wing mirror repeaters) and check the fuses

Posted on Oct 13, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 56 Answers

Turn signal indicator flashing too fast? check to see that all parking lights are working, if you have one burned out, replace it and then recheck the indicator flash to see if it goes back to normal. some vehicles will do that if a parking light bulb is burned out. parking lights are the lights that come on when you don't turn on the head light switch all the way.... check all them front and back to see if any are burned out.. if they are good, then check the turn signal bulbs front and back on both left and right sides ..if all them are good, then replace the turn signal flasher. if you do that, and it's still flashing too fast, take the vehicle to the dealer and ask them if it's actually too fast or if it' normal. and if its not normal to them, and you have done all the above, tell them what you replaced and tell them to check it out for you so it's done right the first time.

Posted on Oct 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My 2002 Freelander blinker won't work and all the bulbs are find. I even change the flasher and still won't work.
Thanks.

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

02 Buick LeSabre Ltd. Rear flashers work (blinking rapidly), front bulbs stay on, inside indicators also flash rapidly. Replaced control module under the dash. Did not help. What else could it be?


Hi there., when flashers/indicators work rapidly on the dashboard you should check whether it is the same on the actual bulds. Fadt flashing is usually a sign of a bulb failure somewhere. If everything is functioning ok externally I would consult a competent technician for a diagnosis.

Jun 08, 2015 | 2002 Buick LeSabre

1 Answer

Renault laguna indicator - All 4 indicator bulbs are working but flashing very fast?


Fast flashing indicates a bulb faulty. Check for side indicators as well.

Apr 23, 2014 | Renault Cars & Trucks

1 Answer

Automatic door lock 1999 toyota prerunner


hi jerome
I have the procedure for Toyota auto lock, is worth to try it
AUTOMATIC LOCK SETTING
1) Step in the vehicle and make sure that all doors are closed completely
2) Insert the key into the ignition key cylinder.
3) Wait for more than 5 seconds.
4) After turning the key to the ACC position, turn the key from the ACC to the
ON position 5 times within 10 seconds (Last position : ON).
? Status Monitor LED will illuminate for 30 seconds.
Note : In case you implement 6 times or more by mistake,
action steps 6)-8) you made will be canceled.
Please retry from step 2).
5) While the LED is illuminated :
• Open and close the driver's door 2 times.
• Turn the key to the ACC position.
? LED will continue illuminating.
? Indicator lights will flash 2 times.
Ignition controlled door lock ON :
6) While the LED is illuminated:
• Open and close the driver's door 1 time.
• Turn the key ACC-ON-ACC 1 time (Last position : ACC).
? Indicator lights will flash 1 time.
? LED will extinguish.
Ignition controlled door lock OFF :
6) While the LED is illuminated :
• Open and close the driver's door 2 times.
• Turn the key ACC-ON-ACC 1 time (Last position : ACC).
? Indicator lights will flash 2 times.
? LED will extinguish.

Jan 28, 2014 | Toyota Camry Cars & Trucks

2 Answers

Beetle left turn indicator runs rapidly


the indicator usually ony flashes fast when one of the indicators on the same side is blown, check the other indicators, should only be a blown globe, defroster should be a fuse =)

Jul 26, 2012 | 2002 Volkswagen Beetle Turbo S

2 Answers

My left turn signal is broken. it clicks really fast in the front, but not in the back of my car. I have replaced the fuse, and the bulb. what else can I replace to make it work?


You replaced the buld in the back? what that bulb connects into is called a socket replace the socket and signal and normal will return

Apr 30, 2011 | Saturn L-Series Cars & Trucks

1 Answer

Indicators on one side only flash to fast


one of the right side bulbs has blown.turn it on and step out of the car ......

Jul 12, 2010 | 2003 Suzuki Grand Vitara

2 Answers

Turn signal doesnt flash when turned on???


If your turn signal indicator is coming on but won't flash, it is caused by one of two things.
  1. A burned out bulb (or a bad circuit to the bulb)
Check ALL the bulbs. Does it flash in one direction and not the other? The side that is not flashing will have a bulb that is not working. It may be a front bulb or a rear bulb, so check them all. Also make sure that there are the same number of bulbs illuminating on both sides. Some cars have 2 turn signal bulbs on each side in the rear. At first glance it may look like they are all working, then when you look closer you may find that only one bulb is illuminating on one side while there are two on the other.

2. If both sides are malfunctioning and you are certain that all the bulbs that are supposed to light with the turn signals are working, then replace your flasher unit.

Nov 11, 2009 | 1995 Buick Century

2 Answers

My indicator light at the front driver side is out and the indicators flash fast...I have changed the bulb but it has not resolved the problem? Its a peugeot 206cc 2001 but the drop down box doesnt have my...


do both sides flash fast or just one side ? if it's both sides you may wish to purchase a new flasher relay for your car. if it's fast on one side still... check further to see if there is a burnt out bulb including (if it has one the side marker light).

robert

Sep 06, 2009 | 1991 Peugeot 405

2 Answers

2002 chevy s-10 rt. turn indicator blinks very fast ...


bad bulb..ground to fast side is corroded or socket/ bulb compromised

Jan 14, 2009 | 2002 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,593 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...