Question about 1990 Toyota Corolla

1 Answer

Toyota Corolla GL 90 model

RPM goes up every time i hit the break.

Posted by on

  • Anonymous Mar 27, 2014

    How many gears does the 1.6 gl auto have?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 86 Answers

Look for a valve in the hose connected from the brake master's hydrovac going to your engine's intake manifold . check if it is still working, the valve traps the vacuum from your manifold to the hydrovac. Replace valve if air passes it on both sides.

Posted on Nov 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High rpm on its own when on idle and gear?


Check with your local Toyota dealer, this model may have had a recall notice out for this problem, if so they should fix it for free.

Aug 01, 2014 | 2001 Toyota Corolla

1 Answer

Toyota corolla 1998 not moving in the morning


i crank car.
it starts, engine idles at 1000 to 1500 rpm cold. good
it don't misfire or shake (tuneups work)
i shift in to gear. Drive. or reverse.. car dont move
i step on gas, and RPM goes way high and car will not move.
there is my guess. correct my errors.
or post yours.

Jan 12, 2014 | 1998 Toyota Corolla

1 Answer

I need the torque settings for a Toyota Corolla 1995 model 4afe engine TORQUE SETTINGS FOR THE CYLINDER HEAD? PLEASE PLEASE HELP


cylinder head bolts:

step one: 22 Ft-lbs.
step two: tighten additional 90 degrees
step three: tighten additional 90 degrees

Feb 22, 2011 | 1995 Toyota Corolla

1 Answer

I recieved Code 12 from diagnosis


For 83-86 Camry, 87 corolla, 84-87 pickups and 4-runner: Code 12 = knock sensor or circuit (distributor or circuit on Cressida, Supra, and Celica 3S-GE)

87-90 Camry, all other models 88-90: Code 12 = Rpm signal/no NE or G signal to ECU within several seconds after engine is cranked.

All models from 1991 on: Code 12 = Rpm signal No "Ne" signal to the ECM within several seconds after the engine is cranked. No "G" signal to the ECM two times in Succession when engine speed is between 500 rpm and 4000 rpm.

Feb 08, 2011 | Toyota 4Runner Cars & Trucks

1 Answer

What is the transmission capacity of a 85 Toyota Corolla?


Automatic Transmission Fluid - Volume: 2.50QTS. ( 2.4L ) - [Automatic Transmission Fluid DEXRON II] - 1.6L Eng & 1.8L Eng

Manual Transmission Fluid - Volume: 1.80QTS. ( 1.7L ) - [API - GL-4 or GL-5 SAE 75W-90 or 80W-90] - 1.6L Eng & 1.8L Eng

Feb 08, 2011 | 1985 Toyota Corolla 2 Door

1 Answer

Suddenly my toyota corolla xe 1996 2E engine misfired. Already check the fuel filter, carb, electronic distributor, high tension cable and still the same. Also before if the engine start the rpm speed is...


It could be your mass air flow censer sometimes when the censer goes bad it sends incorrect readings to your ecu causing inaccurate fuel distribution.

Jan 28, 2011 | 1998 Toyota Corolla

2 Answers

2001 Toyota Corolla lifter noise


Check your timing or could be timing belt out of 1 tooth. This model of corolla does not use lifter.

Apr 02, 2009 | 2001 Toyota Corolla

Not finding what you are looking for?
1990 Toyota Corolla Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...