Question about 1992 Toyota Corolla
I BELIEVE THAT YOUR PROBLEM WITH YOUR TOYOTA IS IN YOUR STARTER MOTOR SOLENOID, ATTATCHED TO THE ST.MOTOR.A FREE TEST SHOULD BE AVAILABLE FROM A LOCAL AUTO ELECTRICION.
Posted on May 27, 2009
Definately ignition switch gone bad, replace them. go from there.
Posted on Oct 13, 2008
SOURCE: 1999 Toyota Corolla CE.
it sounds like either your having a short at the starter or the ignition switch is bad, I am leaning towards the issue being the starter, usually when the ignition switch is going bad there will be no click,
Posted on Oct 06, 2008
SOURCE: Where are the spark plugs
The spark plugs are actually along the top side of the engine. They do not have external wires like some vehicles. First remove the dust cover. Next, there are 4 hex screws along the top of the head that reatin the spark plug casings. Remove these screws and twist out the spark plug connectors and change the plugs as normal. You will need a small flat head screw driver to undo the retaining clip for the electical connections. Be sure to use pre-spaced iridium plugs. you will need to remove the few bolts that hold down the cover for the wires to get to cylinders 3 and 4. 1 and 2 are okay to do without removing this, but remember to change the whole set of plugs. It is an east task.
Posted on Feb 09, 2009
remove phillips scew and the door handle. remove padded arm rest on the door by lifting it up, and remove 2 screws. You can use a panel tool to remove the plastic toggle like pins holding the panel border in. Be as gentle as possible they may break due to becoming brittle.
Posted on Apr 06, 2009
if your looking for the engine details lift the hood of the car and there will be a sticker on the hood to the right about eye level it will have the details of the engine it should say something like 2.4L and then give details about emissions and the car......................... I hope this helps
Posted on Jul 20, 2009
The check engine light also called the malfunction indicator comes only when the computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.
Posted on May 27, 2010
Tips for a great answer:
Oct 04, 2014 | 1998 Toyota Corolla
Dec 16, 2012 | 1995 Toyota Corolla
Jan 24, 2012 | 1987 Toyota Corolla 2 Door
Mar 07, 2010 | 1994 Toyota Corolla
Jan 05, 2010 | 1999 Toyota Corolla
Oct 31, 2009 | 1999 Toyota Corolla
Jul 20, 2009 | 1999 Toyota Corolla
Apr 08, 2009 | 1994 Toyota Corolla
Nov 15, 2008 | 1999 Toyota Corolla
Oct 06, 2008 | Toyota Corolla Cars & Trucks
415 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: