Question about 1994 Lincoln Town Car
Hi ise you have repaired this problem without taking the dash out. how? jim 623 780-0268 thanks or i will call you
Took me about 2.5 hours doing this all by myself. Found very good instructions online with pictures. I never knew it could be this easy...now my AC works like a champ!
Posted on Apr 24, 2009
We had the same problem with ours. It was a limo and it took me about 6 hours to get the blend door motor in and out. It made a clicking noise. I did have to take out the glove compartment and most of the plastic under the dash. you will probably need to be pretty inovative with your tools. find the smallest 5.5mm driver you can find. also they do make stubby open end wrenches that are pretty nice to have. skinny arms and alot of tools should do the job. since you cant fit an entire torx screwdriver you are going to have to try a combo wrench and a torx bit like you find on a drill. also you can remove the raido for more room.(to stick another hand under the dash.) Hopefully this helps. Guido
Posted on Dec 11, 2008
No such luck. Pull the dash unit out because the blend door actuator sits square under the windshield frame in the center of the car. Have a good set of metrics handy, and if I remember you need a 5.5 mm shallow. I also seem to remember some torks (.) bits. They are a real pain in the rear, about a 12 hour job flat rate. They are no fun at all. The whole car is built around the actuator. Good luck.
Posted on Nov 29, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 24, 2017 | Lincoln Town Car Cars & Trucks
Sep 17, 2014 | 2003 Dodge Caravan
Air Temperature Control Blend
Door Failure No Heat
In all modern cars there is a tiny DC electric motor driven gear drive that moves a plastic door that blends heated and cooled air from the AC and the heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most common complaint is no heat but it can be no AC as well. To replace these parts (blend door and blend door actuator) you must remove the entire dash from the car. Always have this problem confirmed by a dealer or qualified repair shop as it is a very expensive repair.
Oct 30, 2012 | Cars & Trucks
Dec 15, 2011 | 1994 Lincoln Town Car
Nov 28, 2010 | 1999 Jeep Grand Cherokee
Jan 06, 2010 | 1995 Jeep Grand Cherokee
Sep 19, 2009 | 1997 Lincoln Town Car
Feb 07, 2009 | 1996 Lincoln Town Car
237 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: