Question about 2006 Mercedes-Benz E-Class

Open Question

Display faulty My mercedes e200 cdi shows "display faulty - visit workshop!"... So I did... but they cannot find the problem :) Front right side lights (all of them) and the seat heater is malfunctioning. Does anybody know a solution to this?

Posted by on

5 Suggested Answers

BearWeb
  • 357 Answers

SOURCE: Mercedes Benz C180 Fault Message Brake Assist.Visit Workshop BAS

Hi there

BAS is the Brake Assist System and if there is a malfunction it would only come into play in an Emergency stop while applying full pressure. BAS applies full braking force because people tend to lighten up their pressure on the pedal in these situations. I would suggest that the best thing to do is go to a Workshop or Service Center and have it checked out. Please remember to put a good rating on my profile.

Kind regards
Dustin Ellse

Posted on Jun 26, 2008

alicantecoli
  • 21990 Answers

SOURCE: Mercedes Benz C270 cdi 2001.

in the fuse panel top right side is a paper folded up this is the fuse layout diagram

Posted on Jan 22, 2010

  • 1 Answer

SOURCE: battery alternator visit workshop is flashing on

MERCEDES C200 Kompressor 2001. battery alternator visit workshop is flashing on trip computer. i have replaced alternator. everything is ok. battery getting charge... i cant see any thing wrong so why workshop flashing?? maybe something wrong with new alternator 4 exampel voltage sensor??

Posted on Apr 03, 2010

  • 398 Answers

SOURCE: My 2005 Mercedes E320 CDI is showing malfunction

It seems that the battery maybe losing it charge. Have the battery and alternator check. Alot of autoparts stores provide this as a free service ie.. autozone, o'reillys. Good Luck

Posted on Nov 03, 2010

Testimonial: "Thanks for the quick reply and solution."

  • 1 Answer

SOURCE: 2004 E270 CDI Battery light visit workshop

I had the same problem in me 2004 cdi e270. Check the voltage going to the battery when the car engine is on. Stedy charge of 12v should be going in to the battery, if the voltage is volitale say between 11v to 14v then it your Regulator (which is attached to the backend of the alternator). You need to change alternator and then unplug all the batteries over night and re plug them back again. The problem should go away.

Posted on Nov 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mercedes c270 2005 model it flashes esp fault visit workshop


ESP is Electronic Stability Control! This is traction control and is controlled through the ECU, take to Mercedes garage to read the fault codes and resolve the problem!

Dec 05, 2014 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

Retaractable hardtop will not open, the right display says (hardtop visit display)


its no lying to you it has to go to dealer for repair due to how system is designed you need the proper scan tool to repair problem.

Jul 15, 2012 | 2003 Mercedes-Benz SL-Class

1 Answer

Ride height is high in the rear dash display says air matic visit workshop


Air matic rear control valve not working or faulty air matick control unit, you must go to the dealer workshop for diagnose, that's the easy and cheapest way otherwise you will spend money for unnecessary thighs, my advise is go to the dealer workshop.

Nov 06, 2010 | 2001 Mercedes-Benz S-Class

2 Answers

My 2005 Mercedes E320 CDI is showing malfunction in red with a battery displayed and saying take to workshop. Car has been parked. However, it starts ok and battery doesn't seem too low.


The auxiliary battery needs to be replaced. It's a smaller battery than the one you have in your trunk. If you take it to your dealer to have it checked out it will run around $300 to change, and on top of it they charged me $50 to diagnose the problem.

Nov 03, 2010 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

I just had my brake pads lined and it shows brake line wear visit workshop.what to do?they are still brand new..


when replace the brake pads you have to replace the brake wear sensor with brake pads if you not fix the wear sensors it will make fault control unit missing signal from wear sensor it will switch on the message on your instrument display check brake wear sensors are they fixed right way or not,

Oct 12, 2010 | 2002 Mercedes-Benz C-Class

1 Answer

2004 E270 CDI Battery light visit workshop


I had the same problem in me 2004 cdi e270. Check the voltage going to the battery when the car engine is on. Stedy charge of 12v should be going in to the battery, if the voltage is volitale say between 11v to 14v then it your Regulator (which is attached to the backend of the alternator). You need to change alternator and then unplug all the batteries over night and re plug them back again. The problem should go away.

Feb 01, 2010 | 2001 Mercedes-Benz C-Class

2 Answers

Battery alternator visit workshop is flashing on


MERCEDES C200 Kompressor 2001. battery alternator visit workshop is flashing on trip computer. i have replaced alternator. everything is ok. battery getting charge... i cant see any thing wrong so why workshop flashing?? maybe something wrong with new alternator 4 exampel voltage sensor??

Jan 02, 2010 | 2003 Volkswagen Passat

1 Answer

Break lining wear


that warning is telling you the brake pads are approaching replacement time. have them inpected and will probably need service. i dont think you will lose your brakes, but have checked asap

Nov 16, 2008 | 1998 Mercedes-Benz E-Class

1 Answer

2005 mercedes benz 320 diesel


These instructions will work from 09/01/2003 and up 211 Model E Class Mercedes
1. Insert igntion key, switch to position "1"
2. press the page button (looks like a page in front of another page. Use the one with the writing on the rear page) on the steering wheel controls repeatedly until the mileage is displayed within the multifunction display.
3. Press the cluster illumination button 3 times in short succession. The battery voltage will be displayed.
4. Press the up or down arrow buttons until the service menu appears.
5. Use the + and - buttons to select the menu option "confirm"
6. Press the page button on the steering wheel until " complete service" is selected.
7. Confirm "Complete Service" with Page Button. The display will show "Service Confrimed"

Sep 16, 2008 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

Not finding what you are looking for?
2006 Mercedes-Benz E-Class Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...