First, if you would like to receive USEFUL information about your vehicle, (ESPECIALLY when you are asking about engine controls) it would be nice if you would mention WHICH ENGINE your vehicle is equipped with!
1995 Mercury Cougar XR7 was equipped with 3 different engines:
3.8L NON-SC VIN CODE [4]
3.8L SC VIN CODE [R]
4.6L V-8 VIN CODE [W]
The crank sensor for both of the 3.8L engines is located at the lower right FRONT of the engine.
The crank sensor for the 4.6L engine is located at the lower right REAR of the engine.
SOURCE: vehicle speed sensor
You will have to get to it probably from under the car it will be located just to the right of the driver's side axle
SOURCE: o2 sensors on a 99 mercury cougar v6
Should be 4. One in front of the catalytic converter and one after on both front and rear exhaust.
SOURCE: location or diagram of pump relay switch
The Constant Control Relay Module (CCRM) is in the right hand front of engine compartment, mounted to upper radiator support.
SOURCE: program fob/reset keyless entry pad 95 cougar
If you open trunk and look on inside of trunk where hinge bolts are you will see code numbers . Owners manual will tell you how.
1,429 views
Usually answered in minutes!
×