I have a 2003 jeep wrangler sport, when i bought the jeep it had a soft top on it, i went and bought a hard top for it and it fits fine, but the wiring plug at the end for the wiper and defroster dosent fit the plug on the jeeps wiring plug, do they make a end plug that does fit it that i can wire in myself?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
OK I have a yj and you start from the windshield put the snaps/or what ever yours is on the top of the doors then down the side or the doors then under the back side window then around the curve and this is the hardest part then your tailgate also make sure your bars on the inside are loseuntil the top is on then thighting those bars and you should have a nice tight top but belive me it is hard and you might need a flathead screw driver for the corners. Good luck and a jeep wave to you!
To make this adjustment you have to loosen the 3 bolts that hold the windshield frame to the dash and the bolt that allows for adjustment in the rollbar extensions. This will allow you to push the windshield forward or backward to close the gap. then tighten everything back up!