Question about 1992 Pontiac Sunbird

Open Question

92 Pontiac sunbird convertible top

I need to find a diagramed instruction manual or very detailed instruction on everything about the 9" tension cables for the convertible top installation. Desperate for help

Posted by on

6 Suggested Answers

  • 3 Answers

SOURCE: removal of a 93 pontiac sunbird LE transmission

You can remove it WITHOUT REMOVING THE MOTOR. It's not that hard, I was able to put in a new clutch system within 8 hours. Here is pretty much what you have to do:

When looking at the engine after lifting the hood, you need to put a jack under the motor and if you have it, either another jack under the trans or what works MUCH easier is an Engine hoist.

Disassemble the motor mount on the right side of the engine compartment (When looking at it from the front of the car. Remove the tire, remove the brake pad and disc rotor from the assembly and pull the nut that is holding the drive shaft in place. You can then just tap it with a hammer until you release the shaft from the hub assembly. (You know that hunk of steel or metal that your wheel studs stick out from.) You can then undo the bolts around the transmission, then use the jack to lower the motor until the trans just clears the wheel well.

You slide it out with either the jack or use the engine hoist ( I WOULD PREFER TO USE THE SECOND JACK TO SLIDE THE TRANNY RIGHT OUT OF THE WHEEL WELL)

Then use the Hoist when trying to line it back up. Put everything back the way you removed it and there we go.

stephen_stich_17@hotmail.com (You can message me if you have anymore questions.)

I HAVE A NINETY ONE THAT I REPLACED THE CLUTCH IN SO THAT WOULD BE THE EASIEST WAY TO MY KNOWLEDGE.

Posted on Mar 04, 2009

  • 4 Answers

SOURCE: how to fix hinges pontiac 2002 sunbird

does it need pins and bushings?

Posted on Aug 29, 2009

Murphybanton
  • 2004 Answers

SOURCE: where can i get a cheap convertible top for a 1988

Visit www.ebay.com

Posted on Sep 27, 2009

  • 18 Answers

SOURCE: I need a wiring diagram for a 1989 Pontiac Sunbird

If you are willing to spend some monye AutoZone as something call Alldata program that come with a CD you install it and it gives you all the Info of a car but you only get to pick one make model car, truck, or van for $25.99 plus Tax hope this info helps
PS: This program gives you wire diagram location of parts show engine pretty much anthing about the vehicle.

Posted on Mar 06, 2010

Testimonial: "Thanks I will give it a try."

ZJLimited
  • 17970 Answers

SOURCE: fuse panel diagram 92 pontiac bonneville

Remember that you have several locations to Fuse Panel; check in the Pontiac Bonneville - Owners Manual (page 266 and next) for details and descriptions...

0cba936.jpg

Hope helps (remember rated this)


Posted on Jun 11, 2010

BCAS1298
  • 3092 Answers

SOURCE: PONTIAC SUNBIRD firing order diagram

Your car came with three types, here's all three, hope this helps.

d578272.gif5516e5e.gif6379837.gif

Posted on Aug 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you put on a convertible top on a 92 Pontiac Sunbird?


Assuming it is already a convertible

To replace it,you go to an auto upholstery
shop

Dec 24, 2010 | 1992 Pontiac Sunbird

1 Answer

How do i replace a convertible top for a 94 pontiac sunbird


when you get the new replacement more than likely there will be an installation manuel or a set of step by step instructions.

Oct 14, 2010 | 1994 Pontiac Sunbird

1 Answer

Fuse panel diagram 92 pontiac bonneville


Remember that you have several locations to Fuse Panel; check in the Pontiac Bonneville - Owners Manual (page 266 and next) for details and descriptions...

0cba936.jpg

Hope helps (remember rated this)


Jun 11, 2010 | 1992 Pontiac Bonneville

1 Answer

Timing belt instalation 92 sunbird


Click on the following free direct LinkS. These are for your 1992 Pontiac Sunbird. They have both: the 2.0L 4-Cylinder and 3.1L V6 Engine Diagrams with the various engine options (AC/No AC etc.)
This First Link has the Belt Diagram/Front Engine Diagrams you will need to remove in order to gain access to the Timing Belt Cover, which also has to be removed so you can remove the Timing Belt.
http://www.2carpros.com/car_repair_information/year/1992/make/pontiac/model/sunbird/1992_pontiac_sunbird_drive_belt_routing_diagram.htm
This Second Link are the Timing Belt Diagrams, complete with Instructional Diagrams.
http://www.2carpros.com/car_repair_information/year/1992/make/pontiac/model/sunbird/1992_pontiac_sunbird_timing_belt_diagram_marks.htm

As far as a Step-by-Step procedure: It would literally take dozens of Pages using this type of forum. I strongly suggest for your sake: to purchase a Haynes or Chilton Manual, available at most auto parts stores for around $20-$25. These have every step-by-step procedure you will need; including the Torques Specifications for each and every Bolt and/or Nut you are removing or loosening.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 01, 2010 | 1992 Pontiac Sunbird

1 Answer

My 92 pontiac sunbird engine sound like it is missing. I changed the spark plugs and wires. It sounds better but still misses. What should I do.


I had the same problem with my 92 sunbird. after a long time of fooling around, we finally figured out it was the ignition module, it the part that is responsible for firing the spark plugs, mine was only running 2 of the four cylinders.

Nov 09, 2009 | 1992 Pontiac Sunbird

1 Answer

I am renting a Pontiac Solstice convertible. I


Follow this link to Pontiac site...scroll down to Solstice user manual, download it. Convertible top instructions are on page 92
http://www.pontiac.com/manuals/

Sep 05, 2009 | 2007 Pontiac Solstice Convertible

1 Answer

My 1991 Convertible top is burining fuses


the roof mechanism is binding try lubricating the joints with some 3 in one oil, this may solve the problem for you.

Aug 06, 2009 | 1991 Pontiac Sunbird

1 Answer

Bleeding brakes on 92 pontiac sunbird


start at the rear wheel on passenger side, then the driver side rear, then bleed the passenger side front then the driver side front, don't let the master run out of fluid, check at least after each wheel, bleed until you don't have air spurting noise and u have a solid stream of brake fluid out the bleeder port, u can buy a brake bleeder wrench from any parts store for a few dollars...

Feb 19, 2009 | 1992 Pontiac Sunbird

Not finding what you are looking for?
1992 Pontiac Sunbird Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...