Question about 2007 Suzuki Forenza Sedan

1 Answer

Interior rearview mirror

It was popped off and it seems that the housing could be taken off and the whole thing reassembled very easily if I knew the secret.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Slightly heat the housing that is attached to the windshield with a hairdryer to loosten the glue that holds it then us a scraper or thin screwdriver to pop it off

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change interior light bulb


If this is the light that is controlled with the center switch, it can easily be changed by carefully prying the plastic cover off and replacing the bulb, found at any local auto parts store.

Nov 20, 2011 | 2005 Lexus Ls 430

1 Answer

I have an 05 Hyundai Tiburon GT and the top side mirror housing is loose, but the whole housing is attatched to the door of my car. How can I tighten the top housing that holds the mirror?


Each Tiburon has an interior triangle cover (some with tweeter speakers in them), They are easily popped of using a small screw driver so you can access/see the three 10mm nuts holding the outside mirror to the door. When you inspect the fasteners (10mm nuts), check to see if each is tight (not loose). You may find that the one at the top could be broken.... the only solution then is replace the mirror (it'll probably have to be painted if you do replace it).

Jun 10, 2011 | Hyundai Tiburon Cars & Trucks

1 Answer

How do you fix a side mirror on a 2001 Chevy Silverado. The mirror housing just flops around and the ''break away'' part seems to be broken.


These are kind of a pain but do-able with a 1/4" drive socket set
Remove the interior trim piece that covers the area Not the whole door panel - it will pop off with a flat blade screw driver
Remove the black foam insert
Now you can see the 3 nuts that hold the mirror to the door
Careful if you drop them you will say bad words
reinstall the same way - Slow and careful

Mar 08, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

On the rearview mirror, the whole mirror is hit


The part can be bought on ebay or even craigs list, Many junkyards have them too a good price is $20 but their just under $100 new

Oct 05, 2009 | 1997 Toyota Camry

1 Answer

Hot to install driver's side rearview mirror '98 Expedition


3 10mm nuts located behind the interior door panel (directly behind the mirror assembly) attach the mirror to the door. Also there you will find the point of attachment for the power as well.

Oct 01, 2009 | 1998 Ford Expedition

2 Answers

Replacement of the side reaerview mirror on a


so you don't need to change the housing, but just the panel the mirror sits on right? If you mean the entire unit, then you'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and remove the cover adjacent to your mirror to remove the bolts to remove the mirror.

If it's just the back and the mirror, you'll need to angle the mirror until you can see the release clips on the back of the panel that mounts it to the housing (Pivot Point)... be very careful as the clips can easily break....

Aug 10, 2009 | 2004 Dodge Ram 2500

1 Answer

Cannot remove the clock


Just go to Subaru-Clock.com. There is an easy-to-follow instructional with pictures and the whole nine yards.

Nov 22, 2008 | 1999 Subaru Forester

1 Answer

Custom Rear view mirror


Hiya...ALL factory-installed rearview mirrors are installed with different wires due to options.
About 6 different rearview mirrors are installed with those options such as On-Star, light, compass, and those features which use different wires....THIS CANNOT be modified with different rearview mirror....**for example, the Equinox owner attempt to pull out a factory-installed base rearview mirror and put in different one that has compass/temperature built into the rearview mirror**

However, the wires are located inside the front headliner which requires removing the sunvisor (and possible removal of interior plastic trim part at the left/right ends of the windshield) prior to pull the headliner down, and a small metal philips or torx screw is used to secure the rearview mirror onto the bracket glued to the windshield.

The best solution is to leave the original factory-installed rearview mirror in place.

May 16, 2008 | 2006 Chevrolet Equinox

Not finding what you are looking for?
2007 Suzuki Forenza Sedan Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...