Question about 1989 Peugeot 405

3 Answers

Electronic immobiliser warning light on engine will not start on Peugot 406 HDI 90

Posted by on

  • 2 more comments 
  • opopita Oct 22, 2008

    After servicing my 2000/2001 406 peugeot saloon car and on my home ,I stopped to greet a friend.after greeting my friend ,

    I wanted to start my car but could not.I notice a key light at the datchboard.this happened three weeks ago.uptill today the car can not start

  • adeel_uk Dec 15, 2008

    Electronic immobiliser warning light on engine will not start on Peugot 406 HDI 90 problem, can anybody advise on how to overcome this fault



    thanks

  • Anonymous Feb 04, 2009

    I also have a 406 and the Key sign came on this morning (Electronic immobiliser warning light) and my car wouldn't start.

  • alilicksit Apr 01, 2009

    2.8 HDi Boxer the immobiliser stays on when the engine is hot. After about 20 minutes it will start. That's real trouble when you stop on the foecourt for diesel and then ahve to sit there for 20 minutes.

    My guess is that the immobliser part of the diesel pump is faulty. It is off to the dealers soonish. I imagine it will be an arm and a leg. As it is 2004 with 14,000 miles I am expecting Peugeot to pick up most of the bill.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

In my case,i have to enter the code on the pad each time i attempt to start the ignition. What can i do about this as it can be very annoying

Posted on Dec 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check fuse 6 in the fuse box under the steering wheel. Undo 3 screws and loosen the steering wheel adjuster, flop the flap down and look for FUSE 6, it is about middle on the top row. I think it should be 6.5A but mine had a 10A in it. Mine was blown and gave the symptoms you describe. Car started as soon as the fuse was replaced, but mine blew again and now always blows, so the AA have just driopped me back home on a low loader :-(

Posted on Feb 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 166 Answers

Sounds like a immobilisers problem have you got another key if so try that one if the car starts take it to your dealer and have all the keys recoded some times thay fail and lose there codes,
also some times the immobilisers box fails and you have to unplug it i cant remember where it is but on Monday when i go back to work i will find out and let you know

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Peugeot 406 hdi 90 2003 problem bsi


have heating in my peugeot 406 hdi when car is ticking over but when i drive for few mins the heater goes cold

May 03, 2012 | 2005 Peugeot 405

2 Answers

Peugeot 406 hdi electronic immobiliser warning


The ignition key may be defective or in need of a battery to generate the code needed to disarm the immobilizer. Hope this helps!

Mar 05, 2010 | 2005 Peugeot 405

2 Answers

I have a warning light on dashboard of peugeot 406 hdi and


sounds like a fault on traction control or abs
check the abs rings on the front drive shafts

Nov 10, 2009 | 2005 Peugeot 405

1 Answer

2003 Peugot 406 Hdi Estate. Cutting out whilst driving and at idle (poss when wife adjusts driver seat). Happened a few months ago after service - suspected air in system. Wife noticed air in fuel pipe...


renew the flexible hose connections at the tank end if fitted and not a plastic pipe going straight to sender unit .Sucking in air problem is one of THEM jobs .a right pain to find 99%of the time .but any flexible rubber pipes can and do go porous with age

Sep 24, 2009 | 2005 Peugeot 405

2 Answers

Couple of months ago would cut out when but start immediately


hallo
I dont belive it is air that is cousing your problem. Think it is more an electrical isue. I have had some problems with relay module (engine bay, near engine computer). And check fuel lift pump.
hope it helps
Marko

Sep 23, 2009 | 2006 Peugeot 604

Not finding what you are looking for?
Cars & Trucks Logo

2,442 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...