Question about 2006 Ford F 350 Super Duty

2 Answers

Have 95 Ford Ecoline van and cannot put gas in tank.The tank seems to be blocked, we removed the tank and cannot see anything blocking the nozzle.

Posted by on

  • Anonymous Mar 20, 2014

    drain the tank

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Also it would be a good idea to check you evap system. this system controls you evaperative gas emitions from tank. if the control solieniod is stuck or the canister is full of dirt it will no left air out of the tank. so this causes the tank to pressure up when refueling. that can cause this problem

Posted on Nov 24, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 52 Answers

Some 95 E vans were made for diesel ,on request, but that would make the hole opening larger. The regular is large too and the smaller opening is for unleaded gas. This may be a customVan with a screen filter that blocks the insert of improper nozzels. Check the depth of the screen with a tape measure. the depth should be 8-10 inches deep. Someone may have tried to remove the screen to steal gas and failed.and the screen has been pulled upward or damaged. If it is the diameter that is the problem then the opening may have been damaged by unknown sources. ei vandalism. Also the screen may be totaly blocked in the neck of the opening. Try inserting a rod through the screen, (with a small metal rod) and then pour a small amount of gas to see if it filters in. If it does you may have to remove the screen completely.

Posted on Oct 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of flasher on a 2006 ford e350 ecoline wheelchair van


Most flasher units are located in the fuse block, but not absolutely sure on your model.

Mar 29, 2014 | 2003 Ford Crown Victoria

1 Answer

Gas fill problem


the filler tube relies on an air bleed hose that runs from the top of the tank to where you place the filler nozzle. This allows air in the tank to bleed out as you are filling it. If this tube is blocked (pinched) then the air has to come out the filler tube past the nozzle and any fuel will cut the flow of at the nozzle.

Nov 15, 2013 | 2005 Ford Explorer XLT

1 Answer

My 95 7.3 turbo runs and idels good no miss but something is holdeing it back when u push the gas I have changed the fule filter and air


Here is what my Haynes Diesel Engine Repair Manual says for a noticeable lack of power, which is what you are describing.
1. Blocked air intake
2.Incorrectly adjusted timing
3.Blocked or damaged exhaust system
4.Obstruction in fuel filter
5.Blocked fuel tank vacuum vent in fuel cap
6.Insufficient fuel supply from tank to injector pump
7.Obstruction in fuel tank filter
8. Pinched or restricted fuel return line
9. Incorrect or contaminated fuel
10.External compression leaks ( glow plugs or injectors)
11. Obstruction in injector nozzles
12.Low compression
This book has an excellent diagnosis and repair section for your engine. It's Haynes part #10330 and costs about $20. Hope this helps.

May 27, 2011 | Ford F-350 Cars & Trucks

2 Answers

How to remove gas from 95 gmc jimmy that has the fuel block in it to prevent cyphering


jack car up ,put on stands ,chock front wheels for safety put the e on remove hose from tank ,you gonna see two metal straps that go around gas tank, remove bolts from straps becareful cause if tank is full it's gonna drop i suggest you get help to bring tank down

Mar 07, 2011 | GMC Jimmy Cars & Trucks

2 Answers

1987 Ecoline van V-8 engine hasn't been started in about 7 years. It ran good before that. What do I have to do first to start it and get it running?


I would change all the fluids and either try dry gas or i would recommend that the gas tank be thoroughly drained and new gas put in the tank.If you have a hard time getting started try to use starter fluid in carburetor or if you have none just use gas. If the vehicle is equipped with fuel injectors locate air filter and follow air duct to engine that is where starter fluid or gasoline will have to be pored to prime the injectors.if it don't start the engine should be tuned up with a major tune up replace all filters ect even if it starts without tune up i would tune it up asap!

Aug 21, 2010 | 1987 Ford Econoline

1 Answer

1989 Ford Ecoline 150 van new fuel pump new filter but still won't get gas and start


The in-tank fuel pump may not be working however I would check and make sure you have power to the pump before just replacing it.Iyou don't have power at the pump then check the inertia switch and if that's doesn't have power check to see if the fuel pump relay is powering up the pump and repair as needed

Jul 29, 2010 | 1989 Ford Econoline

6 Answers

2005 Ford Crown Victoria Trouble filling gas tank. Gas backs up in the filler nck and clicks pump off. Have to run as slow as pump will run to fill.


The tank vent pipe may be blocked or kinked, it usually branches off the main tank filler pipe and can be seen from under the car.

Oct 23, 2009 | 2005 Ford Crown Victoria

2 Answers

95 aerostar 3litre problems with emmisions test


The egr is the only way to lower the no. heet only works with co and hydrocarbons see if the egr tube is full of carbon or the egr system is blocked up with carbon I have owned aerostars for 10 years and have had both the 3.0 and the 4,0 vans and .be thankful you have the 3.0 you would have to take off the upper intake to deal with the egr on the 4.0

Nov 30, 2008 | 1995 Ford Aerostar

3 Answers

Ford Windstar 2001 Gas filling problem


The fule tank vent tube is blocked/clogged. It's the little hole next to the filler hose that invites spiders that clog it up. Blow out the tube and it fixes the problem.

Nov 24, 2008 | 2001 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...