Re: replace light blub in the infromation center on dash
After disassembly of dash and unit is away from dahboard enough to see. you will see fiber optic wires that go into one cluster. the could be white or black. it has one light bulb in that cluster it will twist out for replacement.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most often the battery cables as they connect to the battery get dirty
and they can look clean and not make it so clean them anyway. If the
car was jumped started wrong the main fuse can be blown and no power
gets to the dash. Test light at the big power wire on the back of the
altenator if its dead it's not going to start or light any of the dash
Please I will advice you take this vehicle for a scan and not to do a guess work on it.
If you have an all digital dash, then no, there is no light bulb to replace. It is a digital device, such as that of a calculator. While I am not familiar with these types of dashes, there may be some type of element in there that merely needs replaced. My Odemeter (milieage indicator) is lighted as such as well. I haven't had any issues with it as of yet, but I imagine there may be something to replace, rather than the whole part. I would call the manufacturer, or the dealer to research this more.
Thank you for choosing fixya.com. My apologize for not having a solution for you that would fix it.
You will need to include more information. !. Are you referring to the turn blub in the dash or the bluds mounted in the body of the car. If in the body of the car, you need to indicate whether it is front or rear.?
If the rear, open the trunk, and in the corner nearest the tail light you will see a cloth like material that can be pulled back, which will uncover the tail light assembly. From there you can remove the blub and holder by turning it to the left or right, pull it out and remove the blub.