Question about 1980 Chevrolet Corvette

2 Answers

1980 Corvette oil change

We cannot find the oil cap to add oil...we have looked real hard for it...it is on neither side of the motor...where else could it be? We located the caps for the other fluids already...HELP!!!! Thanks!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Oil fill is on the driver's side valve cover. Sits right on the valve cover, you may have to use a funnel to get the oil into the engine without spillage.

Posted on Mar 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you looked on the valve covers? There might not be an actual OIL CAP but just a cap & tube that goes directly into the valve covers.

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil pressure switch in a 1980 Pontiac Lemans 3.8


Should be on the passenger side right above the oil filter - if you have an oil gauge on the dashboard its a round metal cylinder about an inch and a half around with one wire on it or if you have an oil light it looks like a metal spark plug with 2 wires - either one is screwed right into the block

Jun 06, 2014 | 1980 Chevrolet Corvette

2 Answers

I have a 1980 corvette and no power to the blower fan switch?


I had the same problem on my 80 vette several months ago. The blower relay is located on the firewall top side (engine compartment,passenger side). It is a silver rectangle about 2"x1"x1" . Pull out the wiring plug and check to make sure it hasn't melted due to a loose connection. NAPA sells a new plug that can be spliced into the wiring harness. Let me know if you have any questions.

Mark

Nov 29, 2009 | 1980 Chevrolet Corvette

1 Answer

My car is stalling


Sounds like a bad ignition module in the distributor.

May 18, 2009 | 1980 Chevrolet Corvette

1 Answer

Im looking for a engine vacuum diagram for a 1980 corvette small block


Here is a engine vacuum diagram for a 1980 Corvette.

Link: diagram

Hop this helps.

Apr 20, 2009 | 1980 Chevrolet Corvette

1 Answer

Where do I add power stearing fluid


The power steering pump on a 1980 corvette is located directly under the alternator. I have found it easiest to reach between the alternator belt and unscrew the cap, then use a long stemmed funnel to fill it. If you shine a flashlight down into the spout, you'l avopid overfilling.

Feb 21, 2009 | 1980 Chevrolet Corvette

2 Answers

1980 corvette


This car does not have a door lock relay. The gray and tan wires go straight from the switch to the door lock motors.

Dec 04, 2008 | 1980 Chevrolet Corvette

2 Answers

1980 Corvette misses and bogs on accereration


the way it sounds is the floats in the carb are sticking or getting too much fuel

Nov 12, 2008 | 1980 Chevrolet Corvette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...