Question about 2007 Suzuki Forenza Sedan

3 Answers

"Hold" Button on console beside gear shift - what's it's purpose - we don't know!

Have purchased a 2007 Forenza 4-doorsedan and it did not have a owner'smanual

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Owner's Manual says "You can select this mode to drive with some characteristics of a manual transmission. With the HOLD mode turned on, the automatic transmission will stay in a specific gear range.

Press the HOLD button on the shift lever to turn on the HOLD mode.

While on, the HOLD indicator light on the instrument panel will light up..."

The button is on the console, next to the shift lever, and the HOLD indicator light is in the lower left hand corner of the instrument panel

Posted on Dec 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 20,706 Answers

Why not buy the manual and not ask folks for help at ever conundrum..?
$4 to read or DL

more for paper,

the real deal here, not a clone or hacked up ,store rag version.
https://suzukipitstopplus.com/Products/1032-2007-forenza-owners-manual.aspx

Posted on May 29, 2016

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If it turns on by its self it could be that the TCM is trying to safe guard the transmission. Maybe because it thinks it is overheating. In HOLD mode the shifts are commanded very early and the lock up torque converter is engaged the whole time in 4th gear. This is done to help keep temps down. So if your transmission starts to shift funny when the light turns on by its self, then you might want to seek professional help to see if the TCM thinks the trans is overheating.
If the light turns on and there is no shifting at all and it seems to be taking off very sluggish or taking off in a higher gear then the transmission is in fail-safe mode and now there is a code stored inside the TCM.

Posted on Apr 27, 2016

  • Anonymous May 31, 2016

    if you read that manual you learn how to use it and that it is also a warning lamp for transmission errors from the TCM brain.
    why not buy the manual , we cant pay for you the look it up for you every odd lamp that glows.

    its a feature lamp. hold.
    and a warning, 2 things.
    if you had googled for that, you'd see
    that you are not the first owner on earth with one nor one in warning mode.

    learn to search and not ask for spoon feeding on such and easy topic.


    ok here ill do your job
    my 6grade, grand daughter taught me ...https://duckduckgo.com/?q=suzuki+HOLD+la...

    omg first hit and its correct too.

    A top site, almost zero lies here, (unlike fixya)http://www.justanswer.com/car/621dz-2005...

    these guys charge you $20 to read the manual for , you
    i did it for $0
    is searching new for you?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel filter on 2007 Suzuki forenza I know the pump is underneath seat but I can't find the filter please thanks


on USA cars, the EPA made the engineers move it to the tank.
if not found, guess where it is,,, it can only be 2 places.
the line engine to tank
or in the tank.

they did this to reduce fuel heating... (no kidding)
there are like 1million posts world wide asking this question.
besides,
Gas cap loose DTC codes.
and how to reset oil change nag....
you could just RTM https://suzukipitstopplus.com/Products/1068-2007-forenza-reno-service-manual.aspx

$4 to see it all, every part, every test, and procedure.

Jun 09, 2015 | 2007 Suzuki Forenza

1 Answer

I Have a 2007 Suzuki Forenza with a winding in the Transmission the code PO783


get it fixed, are you going to diagnose and repair and A/T?
that car is a 1/2 GM/ Daewoo car. a sad mix of parts. (sell it? i would )
the service book is here. $4
This is called an FSM.
https://suzukipitstopplus.com/Products/1068-2007-forenza-reno-service-manual.aspx

783 (p07xx means tranny issues)

quote FSM:
Trouble Code: P0783 (2.0L L4 VIN - Auto)
3 - 4 Shift Malfunction Print this code dataprint_icon_codes.gif comments in (xxxx)
Trouble Code Conditions: (preconditions before test)
Transaxle oil temperature is greater than -10 °C (14 °F). Selector lever is not N (Neutral), P (Park) position. (warm , in gear)
System voltage is greater than 9 V.(car battery not dead)
No input speed error DTCs P0715, P0716 and P0717.
Speed sensors not dead.
Output speed is greater than 256 rpm. (tail shaft rpm (speed)
Input speed is greater than 400 rpm. (engine rpm after clutch)
3 - 4 gear shift is active. (the TCM commands shifts to 4th)
Possible Causes:
  • Circuit to solenoids bad.
  • ECM, bad.
  • TCM bad or inputs wrong.
  • end quote.
Comments:
this means, in pure physics.:
the transmission slip's
what that test failure means it bar stool talk is this.
I shafted to 4th but the MPH is too slow, so the transmission
is not shifting to 4th , or it slips

any mech would drive the car first. (did he?)
and flog it up hills (in Kansas? omg)
TO SEE, if it slips in 4th or fails to shift at all.

  1. fresh ATF? and filter? serviced and levels good on A/T
  2. is the 4th gear command to the shift solenoid good.?(logic)
  3. if trans slips? (fails FSM book stall tests) bad tranny.
  4. if the trans fails stall , check line pressure per FSM.
like that, and more, lots to say on A/T
If in uSA find a real , shop, with ASE techs. and win.

Aug 21, 2014 | Suzuki Cars & Trucks

1 Answer

Shifter loose like a spring is gone have to hold to left to work it properly 2007 suzuki forenza


get to the top of the gear box and you will find 4 bolts that hold the turret to the top of the box take it off and the gear lever comes with it . In the gear box there will be a slot across all the selector rails that is neutral for the gear lever. At one end of the slot you will see a plunger that is spring loaded This prevents inadvertent selection of reverse and it pushes the gear lever to the central position. check that spring operation

Aug 20, 2014 | 2007 Suzuki Forenza Sedan

1 Answer

06 forenza -after pressing shift interlock still does not go into gear


this is called park lock out.
most cars need the brake depressed.
if the brake switch fails, no shifts.
many cars have a console (hidden) bypass.
ever consider reading the operators guide in the glove box.?
nowis that moment.

Aug 02, 2013 | 2007 Suzuki Forenza Sedan

1 Answer

What is the purpose of the "hold" button, below


Prevents the transmission from shifting to the next higher gear.

Dec 13, 2010 | 2002 Kia Sportage

1 Answer

I have nubira 1999 , beside transmission gear there is a HOLD bottom but i don't know the purpose of it


may be the shift interlock button
to make sure, you turn on the key, press and hold the button and try to move the shifter out of park without depress the brake.
if you are able to move out of park then it's the one

Mar 08, 2010 | 1999 Daewoo Nubira

1 Answer

My gear shift locks in my 1994 lexus400


The brake light switch is going out, it's mounted behind the brake pedal inside the car on the firewall. It serves three purposes, it turns on the brake lights, cancels the cruise control and disconnects the shift lock.

May 20, 2009 | 1994 Lexus LS 400

3 Answers

2005 Suzuki Forenza Sedan w/ automatic trans


I don't know abou the ignition switch, but the hold button is to keep the transmission from shifting back and forth between gears when traversing a hilly terrain.

Jul 01, 2008 | 2005 Suzuki Forenza

Not finding what you are looking for?
2007 Suzuki Forenza Sedan Logo

2,812 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

68970 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

282 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...