Question about 1996 Subaru Impreza
How to fit a water pump in a subaru impreza 1996 nt
Remove the rad with fan(s) Alternator belt, a/c belt if equipped. Then remove timing belt covers from the front of the engine. Remove the timing belt and then change the water pump re install timing belt ect...
quite a large job
Posted on Sep 16, 2009
REMOVE BELTS FROM FRONT OF ENGINE, REMOVE COVER ON TIMING BELT, REMOVE TIMING BELT AFTER MARKING THE WHEELS WITH THE ARROWS ON THE CAM SHAFT WHEELS. WATER PUMP IS LOCATED AT BOTTOM HOSE HOUSING IT IS A COMPLETE UNIT INCLUDING CASTING. EASY TO FIT REPLACE ALL PART AND MAKE SURE TIMMING BELT IS NOT OUT OF SEQUENCE GOOD LUCK.
Posted on Jul 23, 2009
SOURCE: water leak
I would suggest putting in a new water pump. You could take the existing one off and try to seal it but for me it would make more sense to replace it since you have the old one out. They're not too expensive. Mine was $20. You'll need a tube of high temperature gasket sealer to go around the edges of the new pump. Also, make sure you use the gasket that is with the new pump. Hope this helps ya.
Posted on May 24, 2009
you may be able to from the converter back, maybe???? if the turbo pipe is the same diameter and the flange size. Of course, a muffler shop could make any modifications to make it fit. one thing you want to keep is that it all bolts together where it does now, So you can unbolt it for service.........Dont let them weld everything together.
Posted on Oct 15, 2009
Testimonial: "hi thanks for the help really appreciate it "
Tips for a great answer:
Apr 07, 2011 | 1995 Subaru Legacy
Jan 19, 2010 | 1999 Subaru Impreza
Nov 24, 2009 | 1995 Subaru Impreza
Oct 15, 2009 | 1999 Subaru Impreza
Oct 09, 2009 | 1996 Subaru Impreza
Jun 11, 2009 | 1993 Subaru Impreza
May 24, 2009 | 1995 Subaru Impreza
Mar 06, 2009 | 1998 Subaru Impreza
Sep 18, 2008 | 2000 Subaru Impreza
417 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: