Question about Ford Festiva

1 Answer

Imboliser hi what has happend is that the imobliser isnt working on my car i have changed the battery and still nothing is happening i was jus wondering how to disconnect it because im am living in mandurah and my car is stuck in fremantle and the only way to get it home cheaply is driving it please help

Posted by on

  • whitey_1410 Oct 12, 2008

    i am pretty sure that it is the imboliser because it got me to work and then i went to drive home but the led wasnt lighting up n the imboliser so i went and got a battery for it but still didnt work

    so what do i have to do cut the black wires and it should get me going or have i got the complete wrong idea of it ??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 426 Answers

Therse more to it than simple disconnect fix but you can cut it out.All the wires are color coded so can cut enough of the immobilisers black wires to join the factory ones that were cut back together again.How sure are you that it is the immobiliser?Open yours up and see if yours has a fuse in it some of them do

Posted on Oct 12, 2008

  • tony yeatman
    tony yeatman Oct 12, 2008

    The original wires under the dash are color coded If you pull the tape off the joins from the imobiliser to the factory wires you will see they have been soldered to a particular colour.you cut the nessecary black wires from the immobiliser long enough to join the colored factory ones back together without the need to resolder it.All your doing is joining the wires back to the way they were before the immobiliser was fitted.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it posssible to switch off imobliser or central locking


i've had similar problems with a hyundai coupe , you have'nt mentioned your vehicle , the problem with the coupe was the drivers door lock , as a tempory solution i removed the central locking fuse until could get the lock mechanism changed for the customer, removing the fuse means you will have to lock/unlock vehicle with the key in the door lock

Jun 11, 2015 | Cars & Trucks

2 Answers

Jus changed thermostat and radiator on my 04 kia rio now wont start...?


Did you bleed all the air out of the cooling system after you put all the coolant in?
Some cars may not start, because the computer thinks there's no coolant in the engine.
Hope this helps.

Feb 21, 2015 | 2004 Kia Rio

1 Answer

I have a95firebird t a turn the key nothing happends no gauges work on the dash nothing lights up but it has a good battery


Make sure the battery terminals are clean! I can't believe GM still won't get off it with this design.No other company has changed to this design,and with good reason.They make jumper cables impossible,and how can you see the corrosion when it happens? Remove the 5/16 battery bolts (black first),and look at the terminal inside the boot.

Oct 14, 2012 | Cars & Trucks

1 Answer

Insert key, turn ignition on nothing happens. Reinsert key on and on. Went out next morning and repeated, truck started right up. @nd time this has happened. Worked after first time for 2 weeks and now a...


Check the battery post for loss connection then put heavy grease
Bad contact happend most time on the Battery Post...Make Shure they are not loss you will damage the alternator eventualy ..

Sep 30, 2010 | 2000 Chevrolet Express Cargo

2 Answers

Nothing happens when i turn the key


Hey the 80s celica's had a TSB problem concerning the starting of the cars, so it is a factory wiring problem, I have a 1988 celica and all I did was bypass the ignition with a high amp switch straight to the starter and to + on the battery, hope this helps.

Aug 15, 2009 | 1988 Toyota Celica Liftback

3 Answers

Starter clicks but engine does not trun


see can jump start to the starter itself,not the battery.

Jul 25, 2009 | 1992 Oldsmobile Ninety Eight

1 Answer

Car turning over but not starting


hi.try disconnecting the car battery.MAKE SURE YOU HAVE RADIO CODE!!leave for 30mins and reconnect.may reset the imboliser.i think renault can turn of imboliser if thats what it is with there computer.

May 16, 2009 | 2003 Renault 181

1 Answer

2003 gmc 2500 hd turn key nothing happends


try checking your neutral safety switch.

Apr 15, 2009 | 2003 GMC Sierra 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...