Question about 1994 Geo Metro

2 Answers

Geo Metro 1994 1.3 liter

Transmission will knot shift from 1,2,D unless you do it manual yourself please help

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

If it will shift from second to third automatically, but not to from first to second, then I would suspect the 1st to second solenoid. If you have to change all gears manually, I would suspect the Transmission Control Module located in a small metal bod located under the dash to the right side of the steering column. It's held in by 2 10mm bolts. I do not know about the fuse or where it is located. So you may want to do some research to find the location of it. That would, of course be your cheapest fix if fuse is blown. Don't forget to change your auto trans fluid and filter every 50,000 miles.

Posted on Nov 21, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 350 Answers

Hi no codes registering try looking at the shift soleniods relays and fuses its just a changing problem it drives ok otherwise paul

Posted on Oct 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I need to know where to put the transmission oil in a 1991 Geo Metro 3 cylinder


For $20 you can get a workshop manual. This vehicle comes in a manual gearbox or an automatic gearbox. We are not able to help you until we know which?

Engine 1.0 L LP2 I3 (gasoline)
1.3 L L72 I4 (gasoline)
1.3 L LY8 I4 (gasoline) Transmission 5-speed manual
3-speed MX17 automatic

http://www.repairsurge.com/manual/Geo/Metro/1991/
Online 1991 Geo Metro Repair Manual

May 28, 2016 | Geo Cars & Trucks

1 Answer

What causes hard sticky shifting on 5-speed manual transmission. The manual transmission was almost 1/2 quart low when I changed the gear oil.


If the shift lever is what is hard & sticky, get some grease & lube the handle at the joint at the trans. ( Maint. anyway) . The right gear oil? Was it doing it before the oil chg ? How's the clutch feel? Clutch, Pressure plate & throw out bearing poss. Smell any burning smells? One step at a time. Good luck

Nov 19, 2015 | 1994 Geo Metro

1 Answer

1994 geo metro automatic transmission wont shift manuallywhen warm.


is it slipping,?
if the rpms rise and car dont speed up , in direct proportions that is slip.
is it?
if the engine has full power in 1st, the the transmission is bad.

not sure what shift manually means,
Drive to low? low to high. what? be exact in statements/
better stated what it does good and bad, and when. all modes.
are you saying the trans shirts perfectly in AUTOMATIC when cold./?

Feb 21, 2013 | 1994 Geo Metro

2 Answers

My 1996 geo metro wont shift into fifth gear


probably the synchronisors or possibly shifting fork

Sep 03, 2012 | 1996 Geo Metro

2 Answers

I have a 2000 metro the trans shifts hard when you first start up from 2nd to 3rd. But after that it seams not to shift down from 3rd no matter how many times you spot and go again.


Before guessing at transmission problems, check the fluid level (car warmed up, engine running in Park on level ground) and have the PCM scanned for trouble codes FIRST.
Shift suddenly become very hard. When going from park to either reverse or drive it slams into gear. 1-2 and 2-3 shifts are also harsh. All gears seems to work. Problem may be intermittent: Check TPS for smooth electrical response. If the response is jumpy or erratic at all, replace TPS.
Thank you for using fixya and keep us posted.

Jun 12, 2010 | 1994 Geo Metro

1 Answer

TRASMISSION


The torque converter may be shot.

The main Transmission fluid pump may be shot.

The electricals to the solenoids may be disconnected or relays maight not be functioning.

Look for drips of oil and listen for strange sounds coming from it.

Jun 07, 2010 | 1991 Geo Metro

1 Answer

Transmission fluid for 94 geo metro


An automatic transmission on a 94 Geo Metro takes Dexron II (or higher- ie Dexron III etc) type transmission fluid only.

Jun 14, 2009 | 1994 Geo Metro

1 Answer

Automatic 1994 metro 3 cyl.tranny takes a long time to shift


Sounds like the converter clutch is engaging. Maybe converter selonoid? Should get put on scanner to be sure.

Jan 20, 2009 | 1994 Geo Metro

2 Answers

1994 Geo Metro Automatic Transmission


There is a transmission controller that is located under the dash beside the right hand side of the steering column. It is held on to a bracket by two 10mm bolts. A change in that transmission control computer will make the transmission shift like new

Oct 29, 2008 | 1994 Geo Metro

Not finding what you are looking for?
1994 Geo Metro Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...