Question about 2002 Jeep Grand Cherokee

3 Answers

Power seats driver side seat,will not go up or down just clicks. it is stuck up all other switches work.Is it the motor or switch

Posted by on

  • wsdoor Oct 15, 2008

    I have the same problem. it doesn't go up or down and it also stopped tilting forward. I assumed it was the motors but I don't know.

  • spam413 Oct 28, 2008

    If you go to th junk yard as I did you can get the assembly for about 150.00.It took less than one hour to fix.Thank you for all your help.

×

Ad

3 Answers

I have the same problem with my wife's 2002 Jeep Grand Cherokee. I have determined that some teeth are missing from the gear which drives the screw and adjusts the seat. After unbolting the seat, I was able to take a pair of vise-grips and manually turn the screw while pressing the button. It will turn on its own until it reaches the spot with the missing teeth. After checking the price for the motor assembly (since it does no't appear to be available any other way) I decided that I'd adjust the seat to where my wife likes it and leave it there.

Posted on Oct 27, 2008

Ad

When I look at the motor it moves just a little as if it is trying to do something. It all most looks like it is jammed. I did check it does comes as one assembly and it is very expensive.

Posted on Oct 17, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 475 Answers

Look under the seat while using the switch.
Put your finger on the motor and see if the noise .
I beleive the motor comes complete as an assembly.
The seat would have to come out to replace.

Posted on Oct 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can a manual seat replace the power seat - camry, 1999 front driver seat


Yes, if you purchase a manual set is will bolt in just the same so long as its the same model and year as they do change from year to year.

Jan 12, 2015 | 1999 Toyota Camry

1 Answer

2008 Kia Amanti power seat is not working on the drivers side, passenger side works


You will need either a new/salvaged motor or switch for your seat. One way to troubleshoot is to apply a 12-volt current to the seat motor's power connections and see if the motor moves. If the motor moves (even sluggishly), then the most likely culprit is the switch.

Oct 27, 2014 | Kia Amanti Cars & Trucks

1 Answer

Yukon XL driver side seat not working


There is a seat module under the seat that reads the inputs from the switches and then sends power to the motors, disconnect and reconnect and it may reset. If not you will have to check inputs at module.There is more than one connector on it, you will have to disconnect the power supply.

Mar 19, 2013 | 2005 GMC Yukon XL

2 Answers

1985 buick riviera power seat wont move back


You have a damaged drive gear in the seat, the parts are no longer sold for this ol of a model so your best bet is to try and locate a used one.

Feb 09, 2012 | 1985 Buick Riviera

1 Answer

1998 Blazer: power seat quit working on driver side....


Power seat quit working on driver side.

ITs the power seat motor itself. unplug the harness conected below the seat switch and check if it reciving and current when the switch in on if it does then reconnect it and chech the current on the other wires when u move the switch if it doed then bro u need a new motor .There are four bolts located below the seat.open them and check for a new motor...

May 17, 2010 | 1998 Chevrolet Blazer

3 Answers

1995 jaguar driver seat won't move.


You might want to try disconnecting the negative battery cable for 5 minutes and then reconnecting it. This procedure fixed my seat that was not working. It works fine now. I know it sounds too good to be true but it usually works

Jan 23, 2010 | 1995 Jaguar XJ6

2 Answers

2003 Toyota Camry drivers side power seat stuck


This is not necessary...as many have stated...use a hammer with switch in reverse position. Hammer the seat back...it will catch...

Aug 25, 2009 | 1992 Toyota Camry V6

1 Answer

The window on driver side switch doesn't work all the time it gets stuck down. Heated seat comes on all the time sometimes 8 or 10 times in a 5 minute period.


for the power window, check the fuse and relay for same, check the switch by turning on the doom light an then depress the switch, if the light dims then same is working, check the motor by add 12v directly to same. for the heated seats check the switch, its malfuctioning

Jul 18, 2009 | 2004 Chevrolet Suburban

4 Answers

Power seat switch


It is most definitely the seat slide motor. Most infiniti drivers seats have three different motors. I30, I35's and QX4's all had problems with the seat slide motors. You can tap on the slide motor which is under the front of the seat and it will probably work for a little while, but it WILL stop working completely. There was actually a Technical Service Bulletin regarding this issue because there were so many vehicles that had this problem. I hate to see that guy waste money trying to get a circuit board rebuilt that absolutely will not solve the problem. 

Dec 29, 2008 | 2004 Infiniti QX4

1 Answer

Driver side power seat front to back motor stuck forward


Take apart the drive box in front of seat track, on both sides with an allen wrench. You can then push the seat to get at the bolts to remove it. My trolley drive motor had bad brushes. I am now looking to replace the motor, if I can find the replacement.

Oct 03, 2008 | 1998 Chrysler Sebring

Not finding what you are looking for?
2002 Jeep Grand Cherokee Logo

604 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...