Question about 1998 Nissan Maxima

2 Answers

Engine light is on 1998 maxima gle

Engine light is on and the computer showed 3 code 1440, 1493, and another 1440. what could be the problem and how to resolve

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Another suggestion to find out what can be the right sensor or parts to buy specially a do it self mechanic.Bring your car to the Auto Parts stores Like AUTO-ZONE , PEPBoys & Other auto parts that offer A FREE Diagnostic CODE Analyzer right on the parking lot.From there they could be able to pinpoint w/c exact parts to replace. Sometimes it don't work when when replacing Oxygen sensor unless it was fully indicated on the code.

Rizal1914@yahoo.com

Posted on Dec 04, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace the oxygen sensors. The check engine light on a 98 maxima lets you know that there is a problem with the emission system.

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine Light


after any part is changed due to a code it needs to be erased before the car is started erase the codes and go from there

Oct 21, 2012 | 1997 Nissan Maxima

1 Answer

I have a 1998 Nissan Maxima GLE, I Failed the Emission Inspection (DTC) Diagnostic Trouble Codes of "P1492","P1105" What these Codes exactly? mean


A code P0300 may mean that one or more of the following has happened:
  • Faulty spark plugs or wires
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector(s)
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Stuck/blocked EGR valve / passages
  • Faulty camshaft position sensor
  • Defective compute
  • P1105MAP/BARO Pressure Switch Solenoid Valve
  • Check and clean the MAP sensor, or replace.
  • P1492EVAP Canister Purge Control/Solenoid Valve (Circuit)
  • Replacing the purge solenoid will clear code P1492 This should also clear code P0300 as well.

Oct 16, 2012 | 1998 Nissan Maxima

1 Answer

I have a 1998 Nissan Maxima GLE, engine was replaced with a 1998 SE engine. Since then, I have been having problems starting. I get a boost and once I move the car and park it, it won't start again....


there is a problem with your iginition timing. it is most probably overly advanced. have an experienced mechanic check your ignition timing. the mechanic should check the distributor, camshaft, and crankshaft timings.

Aug 12, 2011 | 1997 Nissan Maxima

1 Answer

Service engine lights on 1998 maxima gle


Your light is on because the computer has detected a problem with your vehicle. Since there are many things that can cause it to go off, you need to have it scanned at Autozone or Advanced. They do this for free and they will tell you why your light came on.

Mar 05, 2011 | 1998 Nissan Maxima

1 Answer

My 2002 Maxima GLE wont go in Reverse. When I place in Reverse the engine revs but the car does not move. The car has lost power while in Drive and the RPM's will not exceed 3,000 RPM. Does this mean I...


If your`check engine light is on, have the codes read to find out what is causing your transmission problems, but yours seems to be a common problem, the usual symptoms of a failed speed sensor in the 00-03 maxima. Have it checked out.

Oct 05, 2010 | 2002 Nissan Maxima

1 Answer

I have a 98 maxima gle/gxe srs light


Did you clean ECU memory from trouble codes? No? DO it!

Dec 01, 2009 | 1998 Nissan Maxima

1 Answer

Tail lights broken on my 1998 Nissan Maxima GLE. Want go get new one for the passenger side and replace it.


Remove felt cover in trunk area around light, remove securing nuts and unplug the unit, assembly is reverse, ensure you install the seal with it. Good luck

Nov 20, 2009 | 1998 Nissan Maxima

1 Answer

What kind of oil I should use for a 98 nissan maxima gle


depending on how many miles you have on it.

usually 10W30 for cars around that year. (if you fill it with thinner oil the engine might make clicking sounds, and thicker oil might clog up the engine)

Aug 14, 2009 | 1998 Nissan Maxima

1 Answer

Still starting, but barely.


use a scan tool to check the efi system first!!! then tell me what the trouble codes are! on josephaddyson@yahoo.com

Jun 17, 2009 | 1998 Nissan Maxima

2 Answers

1998 maxima gle Tune-up needed what parts do i need


Every 30,000 miles you need an air filter, every 60,000 a fuel filter, every 100,000 spark plugs. That's it.

Oct 11, 2008 | 1998 Nissan Maxima

Not finding what you are looking for?
1998 Nissan Maxima Logo

Related Topics:

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...