Question about 2000 Lexus ES 300

1 Answer

Brakes hi how do i install new brakes on an es 300 yr2000

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Pretty easy job.
you will need basic tools jack,stand

jack car up from jacking point d/s near front mud flap area you will see what looks like jacking point or check manual
place jack stand under A arm d/s axial or any safe point see manual
remove lug nuts
remove tire
behind brake caliper is 1 sm bolt think it 14mm need to remove
loft up caliper it will pivot on the other bolt
remove old pads
followinscructions for new pads add brake quiet to new pads and shims reinsert
reverse order. thats it

Posted on Nov 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replace third brake light 1995 lexus es 300

Go through the trunk to get to the light

Apr 19, 2014 | 1995 Lexus ES 300

1 Answer

I have a 2002 ES 300 and all 3 brake lights do not work. The fuse in the driver side panel is fine what next?

have some one check brake lamp switch under dash by brake pedal arm.Could be disconnected or bad.

Dec 11, 2010 | 2002 Lexus ES 300

1 Answer

Front wheel shimmy while braking. Had new set of rubbers installed & balanced. Front wheels still shimmy.

If it is while applying the brakes its a good chance its your brake rotors.

Jul 28, 2010 | 2000 Lexus ES 300

1 Answer

My 1993 Lexus 300 never had the cabin air filters

pls get a mechanic to instal it cos its complicated

Apr 17, 2010 | 1993 Lexus Es 300

2 Answers

I put new wheel bearing on my 1997 lexus es 300 now my traction light and abs light will not go off and when i apply my brakes the pedal reaches a point and release

are you sure you got the assembly for ABS. There should be a ring that can be see. Also check the connector you may of unplugged. Its real easy to install the wrong bearing if you did'nt know.

Nov 08, 2009 | 1997 Lexus ES 300

1 Answer

Both front brakes are leaking brake fluid/Lexus es 300 1993

probably not. you won't know though till it is taken apart. the worst i think is the calipers are frozen. but most likely you can swap the hoses out and it will be fine. good luck and if you have any more question please ask

Sep 25, 2009 | 1993 Lexus Es 300

1 Answer

How to replace third brake light on 1997 lexus es 300

"To get access to the 3rd brake light:

- Place each hand against both sides of the plastic housing, and firmly grasp and pull the housing towards you. It might not budge at first, but it should move once you get a good grip on it.

- Pull the housing out just enough so that you can see the brake light bulb and stick your hand underneath. Ignore the speaker wires.

- Pull out the old bulb from the socket (it plugs in/out). Wear rubber gloves when handling the new bulb, and put the new one into the socket.

- Reverse the steps here to put the 3rd brake light back into place. Test out your brake light, and you're done" quoted from lexusk8 @ (great forum)

May 29, 2009 | 1998 Lexus ES 300

1 Answer

How to replace third brake light on 1998 lexus es 300

in order to replaced the bulb, u go from inside the car (back Seat). The housing for the brake light will shift to the left (passanger side) then slide out, disconnect connector and replace buld

Apr 28, 2009 | 1998 Lexus ES 300

1 Answer

1998 lexus es 300 brake indicator

Check the brake fluid in the reservoir first. As brakes wear, the level goes down. If the pads are worn far enough, the light may come on while driving. If the brakes haven't been replaced recently, have them checked for wear also.

Apr 16, 2009 | 1998 Lexus ES 300

1 Answer

Replace rear window brake light lexus 300

try pulling the whole assembly towards you as you face out the back window. It popped right off with a little muscle in my 98 es.

Dec 20, 2008 | 1995 Lexus ES 300

Not finding what you are looking for?
2000 Lexus ES 300 Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts


Level 3 Expert

77499 Answers


Level 3 Expert

917 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides