Question about 1995 Chevrolet Blazer

2 Answers

Blinkers don't work even when I replaced the fuse

My blinkers don't work on my 1995 Chevy Blazer. I have replaced the fuse.

Posted by on

  • Anonymous Feb 07, 2009

    my blinkers dont work when i turn them on. when i hit the brakes and use the blinkers manually the rear ones work but the front ones dont. and my arrows on my dash dont work but My hazards work and the arrows work for them too.

    its a 96 chevrolet blazer

  • Anonymous Mar 12, 2014

    Blinkers won't work unless hazard lights on in my 1995 Chevy blazer



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had that same issue and there is a switch under the dash that is a cylinder shape. It is a blinker switch relay thing. I am not sure of the exact name but I know at autozone you can get it for under $10 and its easy to install!

Posted on Nov 17, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Chevrolet Master
  • 76,848 Answers

1st have you fixed the short that caused the fuse to blow? If you did or it was a trailer wiring shor then replace the flasher module, that is the most likely cause of the present problem.

Posted on Oct 11, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The blinkers on my 96 Chevy Blazer don't work and I checked where the manual told me to change the fuse but the fuse is perfect. Now what? Thank You

There is a blinker modulator/regulator relay that needs to be replaced. It is one of the larger metal blocks beside the fuses. Ask O'reilly's or your local dealership for the fuse box schematic to locate the blinker relay and switch them out. I would expect it to be around $20. I had this problem with my 96' and the relay was the cause.

Jun 17, 2010 | 1996 Chevrolet Blazer

1 Answer

1995 Chevy Blazer. About to replace the dreaded multi-function switch/blinker arm, etc.. Any tips I should know beforehand. Disconnect battery neg.? and positive? Pull fuses? Disable air bag system...

definitely disconnect battery first. invest in or rent a wheel puller and a ring lock compressor the other tools are pretty standard. mark steering wheel and post so it will go back in the same clocking position. there is usually a reference line on there from the factory.

Apr 28, 2010 | 1995 Chevrolet Blazer

3 Answers

Need wiring diagram of 1995 chevy blazer 4x4 with 4.3 vortex engine

need email address to send diagrams, need to know what parts of electrial you need

Feb 07, 2010 | 1995 Chevrolet Blazer

1 Answer

My turn signals on my 1995 chevy blazer don't work. Occasionally they come on, but don't work for more than a few seconds.

have you tried replacing the flasher it may have had a trailer wired up for it and didnt have a heavy duty flasher fuse installed and made the original lazy now or even ready to quit all together .

Feb 04, 2010 | 1995 Chevrolet Blazer

2 Answers

97 Chevy truck blinkers not working but hazards do

Try replacing the Flasher first before spending to much money for a possible simple fix. If it's not your flasher then it could be the turn signal leaver.
Ok, this may seem stupid, but that's what they did to the blazer. They set the flasher near the middle and under the center console behind the radio.

It's to the left of the radio right behind the dash. The hazard flasher and the turn signal flasher are side by side.  It right next to the Cig lighter behind the panel. They do mark the turn signal from the hazard flasher on the plastic behind them. Turn is on the right.

Good luck and hope this helps.

May 02, 2009 | 1997 Chevrolet Blazer

1 Answer

Brake lights do not work chevy blazer 2001

You have a bad multifunction switch in the steering colum. The same thing happened to me on my 2001 LS Blazer. There was a recall for this item, and if you go to your Chev dealer they can run your VIN and see if it had already been replaced under the recall. If not, you may be in luck for a free fix.

That was not my luck, even though I had the same failure it had already been "fixed" during the recall, and that repair cost me over $300.00

Good luck!

Apr 03, 2009 | 2001 Chevrolet Blazer

1 Answer

1995 Chevy Blazer - Possible Electrical Problem

probably a loose fuse connection or a fuse box problem you may have to take it out and inspect it

Oct 24, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides