Question about 2002 Nissan Xterra

1 Answer

Rear turn signal

How do I replace the rear turn signal bulb? I've taken the screws out, but can't get the lens off. How does the lens come off?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 314 Answers

Check the back of the light from inside the truck! That should get you to the bulbs. Frankster016

Posted on Oct 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace rear turn signal bulb


that is all covered in the glove box operators guide.\
lost?
here it is.
https://suzukipitstopplus.com/Products/1171-2006-verona-owners-manual.aspx

on most you remove the lens
others need read access. only looking finds which way it is.
did you look yet?
first google hit of millions'
i see 2 holes there. id bet you remove those 2 screws?

http://www.ebay.com/itm/2006-2009-Suzuki-Grand-Vitara-Tail-Lamp-Lens-Housing-LH-/140542928348?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ASuzuki'Model%3AGrand+Vitara'Year%3A2006&hash=item20b902e5dc&vxp=mtr

Dec 19, 2013 | 2006 Suzuki Grand Vitara

1 Answer

Is there a trick to getting to the rear turn signal on a 2003 ford focus hatchback. I had removed the screw to the lens cover but I still cannot gain access to the turn signal bulb to replace it.


Replacing tail/brake/backup lights and turn signal bulbs (coupe)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. From inside the luggage

compartment remove the wing nut

of the rear light assembly cover.

3. Using a Phillips screw driver

remove the screw. The lamp is still

retained by a spring loaded clip.

Remove by gently pulling out the

light housing.

4. Turn the bulb socket counterclockwise as far as possible and pull it

out.

5. Pull the bulb straight out of the socket.

Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (sedan)

1. Make sure the headlamp control

is in the OFF position and then

open the trunk.

2. From inside the luggage

compartment remove the three wing

nuts of the light housing.

3. Gently pull the light housing to

the outside.

4. Turn the bulb socket

counterclockwise and pull it out.

5. Pull the bulb straight out of the socket.
Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (wagon)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. Using a screw driver remove the

fixings and trim from the body.

3. Remove the socket from the lamp

assembly

4. Pull the bulb straight out of the

socket.
Install in reverse order.


Hope this helps.

Zeppelinx12

Mar 03, 2011 | 2003 Ford Focus

1 Answer

I have a 1993 Ford Escort Wagon tht has had it's front bumper and turn signal light housings destroyed. I was wondering how hard it will be to replace them myself and besides the obvious item what else...


Check this procedure for Signal and Marker Lights...


REMOVAL & INSTALLATION
Front Turn Signal and Parking Lights
1991-96 models
(see Figures 1, 2, 3 and 4)
  1. Remove the lens upper retaining screw and the fender side retaining screw.
  2. Slide the lens assembly forward until access to the rear is possible.
  3. If necessary, unplug the bulb electrical connection.
  4. Turn the bulb socket assembly counterclockwise and remove it from the lens.
  5. Depress and twist the bulb approximately 1 / 8 turn counterclockwise, then remove it from the socket.
zjlimited_722.jpg

Fig. 1: Remove the lens upper retaining screw and the fender side retaining screw

zjlimited_723.jpg

Fig. 2: If necessary, unplug the bulb's electrical connection

zjlimited_724.jpg

Fig. 3: Turn the bulb socket assembly counterclockwise and remove it from the lens

zjlimited_725.jpg

Fig. 4: Remove the bulb from the socket



To install:

  1. Align the bulb's locating pins, then install the bulb in the socket.
  2. Attach the socket to the lens and turn it clockwise to engage it.
  3. If removed, attach the bulb electrical connection.
  4. Place the lens into position, then tighten the fender side and upper retaining screws.

Hope this helps.

Feb 18, 2011 | 1993 Ford Escort 4 Door

1 Answer

Rear turn signal b ulb burned out - How to replace


Rear Turn Signal, Brake and Parking Lights
  1. Remove the tail light assembly screws, then the assembly.
  2. Disconnect the twist lock socket from the lens housing. NOTE: To remove the bulb, turn the twist lock socket (at the rear of the housing) counterclockwise 1?4 turn, then remove the socket with the bulb; replace the bulb if defective. Fig. 7: Remove the tail light assembly screws, then the assembly - wagon shown 86816223.jpg Fig. 8: Twist the socket counterclockwise to remove from the housing 86816225.jpg Fig. 9: This type of bulb simply can be pulled out of the socket for replacement 86816226.jpg To install:
  3. Attach the socket assemblies to the back of the lamp unit.
  4. Install the lamp assembly to the vehicle with the mounting screws.
License Plate Light
  1. Remove the lens screws.
  2. Once the lens is removed you, can access the bulb and replace if needed. To install:
  3. Install the new bulb, then attach the lens to the body of the vehicle.
Center High Mount Stop Lamp
  1. Remove the screws securing the lamp cover.
  2. Remove the mounting nuts, then unplug the electrical harness to the lamp assembly.
  3. The lamp now should come out. To install:
  4. Position the lamp assembly to the vehicle, then attach the electrical harness to the lamp.
  5. Install the mounting nut, tighten to 62 inch lbs. (7 Nm).
  6. Attach the lamp cover. Fig. 10: Exploded view of the center high mount stop lamp assembly - wagon shown 86816230.gif
    Fig. 11: Light bulb application chart for all models with non-European headlamps 86816237.gif
    Fig. 12: Light bulb application chart for Buicks with European headlamps 86816235.gif
    Fig. 13: Light bulb application chart for Oldsmobiles with European headlamps 86816236.gif
    prev.gif next.gif

Dec 19, 2010 | 1994 Buick Century

1 Answer

How do you change the parking lights


Signal and Marker Lights
REMOVAL & INSTALLATION
Front Turn Signal and Parking Lights
1991-96 MODELS

  1. Remove the lens upper retaining screw and the fender side retaining screw.
  2. Slide the lens assembly forward until access to the rear is possible.
  3. If necessary, unplug the bulb electrical connection.
  4. Turn the bulb socket assembly counterclockwise and remove it from the lens.
  5. Depress and twist the bulb approximately 1?8 turn
    counterclockwise, then remove it from the socket.





    Fig. 1: Remove the lens upper retaining screw and the fender
    side retaining screw
    90986p79.jpg






    Fig. 2: If necessary, unplug the bulb's electrical connection
    90986p90.jpg






    Fig. 3: Turn the bulb socket assembly counterclockwise and remove it from the lens 90986p91.jpg






    Fig. 4: Remove the bulb from the socket
    90986p92.jpg

    To install:

  6. Align the bulb's locating pins, then install the bulb in the socket.
  7. Attach the socket to the lens and turn it clockwise to engage it.
  8. If removed, attach the bulb electrical connection.
  9. Place the lens into position, then tighten the fender side and upper
    retaining screws.

Oct 31, 2010 | 1991 Mercury Tracer

1 Answer

Replacing 92 Explorer right rear signal bulb


laurbeee,

As I have just seen this post I may be late in answering.

1. Open the hatch and look for the two screws on top of the tailight.
2. Take these out with a No.3 Phillips head screwdriver.
3. Pull on the tailight gently outward as the plastic inserts are what holds the lens in the body.
4. Locate the lamp for replacement and twist the lamp socket out of the lens.
5. Replace the bulb with the new one making sure to leave it clean of any oils from your hands. Twist the socket back into the lens.
6. Reasemble the lens back into the body and replace screws.


JTRadiojunkie

May 20, 2010 | 1992 Ford Explorer

1 Answer

How do I replace the passenger side corner light and front side turn signal light?


Front Turn Signal & Parking Lights


7ccc73e.gif
Remove the 2 parking light housing retaining screws ...


9898a80.gif
... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull


a323ae9.gif
Push the bulb in the socket gently and turn clockwise, then pull the bulb out of the socket. Note the offset retaining ears on each side of the bulb


  1. Remove the screws from the lens and separate the lens from the headlight bezel.
  2. Remove the headlight bezel.
  3. Remove the screws from the turn signal housing and pull it out.
  4. Turn the bulb socket counterclockwise 1/3 turn and remove it.
  5. Installation is the reverse of removal.


Side Marker Lights
  1. Remove the screws from the marker lens and separate the lens from the headlight bezel.
  2. Pull the bulb from its socket in the back of the lens.
  3. Installation is the reverse of removal.

Feb 14, 2010 | 1997 Jeep Grand Cherokee

1 Answer

How to replace front turn signal housing


Front Turn Signal & Parking Lights
  1. On some models you will need to remove the headlight bezel mounting screws and the bezel.
  2. Remove the mounting screws for the lamp assembly.

af50756.gif
Remove the mounting screws securing the lamp assembly

  1. After the screws are removed, pull the assembly from the vehicle.

5deda5d.gif
After the screws are removed, pull the assembly from the vehicle

  1. Disconnect the twist lock socket from the lens housing.

90fe451.gif
Disconnect the twist lock socket from the lens housing

To remove the bulb, turn the twist lock socket (at the rear of the housing) counterclockwise 1/4 turn, then remove the socket with the bulb; replace the bulb if defective.


0568896.gif
Newer Oldsmobile models have the turn signal separate from the headlamp assembly ...


252443f.gif
... unlike the newer Buicks, where the unit is attached to the headlamp

To install:
  1. Install the electrical harness to the back of the unit.
  2. Position the signal assembly, then attach to the vehicle with the mounting screws. Tighten the screws to 54 inch lbs. (6 Nm).
  3. Insert the socket to the back of the unit, then attach the headlamp bezel if removed.

Feb 13, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Is it easy to replace the rear turn signal and brake light bulbs on a 2005 Pacifica? Do you access the screws from the hatch?


You can access screws from hatch behind liner. there should be two screws for each lens. Bulbs and socket just turn and remove.

Aug 25, 2009 | 2005 Chrysler Pacifica

1 Answer

How to access front turn signal for replacement


Here you go, removal & installation of:

Front Parking/Turn Signal Lights:
  • Remove the screws from the the lens and separate the lens from the bezel
  • Remove the screws from the turn signal housing and pull it out
  • Turn the bulb socket CCW 1/3 turn and remove it
  • Installation is the reverse of this procedure
Side (Front) Marker Lights:
  • Remove the screws from the marker lens
  • Separate the lens from the headlight
  • Pull the bulb from the back of the lens
  • Installation is the reverse of this procedure
Hope this helps

Mike

Jul 06, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
2002 Nissan Xterra Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...