Question about 1998 Ford Contour

2 Answers

Turning signals not working

Can not find fight fuse for turning signals for 1998 ford contour

Posted by on

  • 1 more comment 
  • edwardserika Oct 21, 2008

    My turning signals or hazardous flasher arent working at all.

  • Lemons2005 Feb 12, 2009

    My turn signal will work for a few seconds, then cut off. Sometimes it won't cut on at all! The hazardous flasher does not work either.

  • Justin Sibley Dec 17, 2012

    my turn signals dont come on but my flashers work....what could this be? Turn signal switch? or is there a fuse or relay?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Your problem is call a relay is under the dash .need to buy flasher relay at advance auto parts, pep boys, or any oder auto part store.

Posted on Oct 30, 2008

  • ershorty07 Oct 30, 2008

    your problem is arelay under the dash. need to buy a flasher relay at any auto part store,it's about $3.00

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 1,779 Answers

Have you checked the flasher? Located on the steering column (low) I believe. countrycurt0

Posted on Oct 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have1998f0rd contour back turning lights out. Dont have inside fuse diagram.


If BOTH turn signals are out, it would be a fuse, but if only ONE is out, it's the bulb.

If you need to change the fuse, sometimes the labels are on the fuse box cover. If not, just pull out one at a time until you find one that has a melted element and replace it.

Jul 01, 2011 | 1998 Ford Contour

1 Answer

Blinkers and emergency flashers not working on my 1998 ford contour


check fuses in fuse box if its good theres a blinker relay under glove box when you turn blinker on you should hear it clicking

Dec 20, 2010 | 1998 Ford Contour

1 Answer

Windshield wipers and fluid not working in 1998 ford contour. replaced fuse before and they worked but now they wont and the fuse is fine. any suggestions please?


Sounds like the wiper motor is seizing up... it doubles and the washer pump ...
try to move them manually when you have them turned on...

Jul 15, 2010 | 1998 Ford Contour

2 Answers

1998 contour parking lites on left side front & rear do not work, bulbs are good.


The problem isnt a "fuse" The problem is either a bad ground to that circuit or the turn signal arm is faulty. If it were a fuse no signals would work. You can also check the blinker relay(flasher) which is also known to be faulty and cheaper to fix. wf

Feb 24, 2010 | 1998 Ford Contour

1 Answer

1998 Contour turn signal problem


Check the plugs on the back lights. There must be a bad ground. Remove the light from the socket in the rear light, then depress the metal wire that holds the plug onto the light receptacle. Clean the contacts and ensure they are free from corrosion and rust. Try putting some dieelectric grease on the contacts. NOTE: The center wire BLACK is ground, and you could splice a wire from it to the metal of the car via one of the screws, on both sides, if after cleaning both sides they still dont work.

Oct 31, 2009 | 1998 Ford Contour

1 Answer

Brake lights on 98 ford contour dont work


could be the brake pedal switch itself has dropped below or worn down casing an insufficient connection look at the pedal and see if it makes contact with the switch the lights all function through the turn signal lever these days with the wipers the cruise-control etc it may also be a break in the line from wear especially if you have tilt wheel ....

Sep 23, 2009 | 1998 Ford Contour

1 Answer

I have a 1998 ford contour and my tail lights quit working i have no brake lights,turn signals or parking lights


have you checked all the fuses or if they are ok try checking the relays under the bonnet hope this helps regards Jim

Apr 16, 2009 | 1998 Ford Contour

1 Answer

1997 ford contour turn signal problem


Check the left side of the vehicle for a blown bulb or incorrect bulb in one of the sockets. The fast flash is a signal to tell you something is wrong with that side

Apr 15, 2009 | 1997 Ford Contour

1 Answer

Turn Signal


Well, I have a Ford Contour Se 98' V6. The flasher rely IS under the steering wheel column. It's actually connected RIGHT next to your turn signal sitck/switch.

Jul 06, 2008 | 1998 Ford Contour

Not finding what you are looking for?
1998 Ford Contour Logo

908 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...