- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The dash and tail lights are on two different circuits, and the brake and turn signals are on different circuits, so at least 4 circuits total.
I would start at the headlight switch and check for power on the first two issues.
check park/tail fuse regarding dash ,park ,tail problem .brake light on passenger side is probably the brake globe needs replacing .Turn signals on passenger side could be globes or switch,check globes first ,if globes and fuse are ok ,may well be the switch especially if park switch and turn signals are on the same switch lever/stalk
Look at fuse #18, a 15 amp fuse, in the fuse block. This fuse powers both the tail lights and instrument cluster lights. Usually both of these light systems are powered by the same fuse so when your cluster isn't lit up you'll know right away that your tail lights aren't working as it's not safe to drive without tail lights. Your brake, turn, and head lamps are powered by different circuits. Hope this helps and good luck!
My 97 Rodeo had the same problem. No Tail lights, no. Dash lights. There is also an annoying buzzer that goes with the set telling you the lights are on, there is no key in the ignition and your door is open. (you don't notice it when it's gone but you sure notice it when it's back) The Fuse (taillight Illum) was good, The Light relay under the hood was good and all bulbs were good. What fixed this problem was replacing the tail light relay which is located in a panel just to the left of the brake pedal also called the kick panel.Inside there are 3 relays. I replaced the one in the middle and got everything to work. If you need to identify the relay you can put your hand over it and then turn the lights on and off. The correct relay should click. Mine was the middle one. Hope this helps someone because it stumped me for months.
I have this exact same issue with my 05 Colorado and its so annyoying (not to mention unsafe)... I thought it was just the blub- becuase in my case my signal is no loger blinking. My break light still works, as does my parking light...