Question about Mercury Marquis

1 Answer

All lights work but my headlights dont, I can pull back on the high beems they even work but when I try my head lights they do not

Posted by on

  • Anonymous Oct 22, 2008

    The flash to pass works and if you start the wipers with the headlights off the parking lights will come but not the headlights. Nothing brings them on. The next morning they work fine.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

Check fuse if it is good check to make sure power is going to light switch if you have power t switch the switch is bad replace switch

Posted on Oct 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When switching headlights on only park lights become on. what could the problem be?


check the switch pull back or forwerd wich ever way the high beens come on see if high beems work if so stil possibly bad switch could be a relay another thing u can do check see if power is at head light with test light

Apr 05, 2014 | 2008 Toyota Yaris Sedan

1 Answer

Head lights do not come on changed switch fues is new high beems work when u pull back on switch


Do the flashers work?

My '87's headlights would not work for some reason. And I noticed that the flashers did not work, and the flasher button did not flash. Upon replacing the fuses for the flashers, they worked fine.

Jul 05, 2011 | 1988 Volkswagen Cabriolet

1 Answer

The headlight on the pass. side works right. the drivers side when in low beem, the light is in high beem. when the light is on high beem the light is on low beem. this is a 2000 mercury sable


someone has switched the wiring harness sockets to the wrong bulbs or installed the bulbs in reverse. get in behind the headlight assembly on the driver side and reverse the wires, if that does not work then pull the bulbs and swap them inside to outside and vice versa.

Jun 10, 2011 | Mercury Sable Cars & Trucks

1 Answer

I have a 1997 F-350 with a 7.3 and lately while I am driving my headlights only turn off and some times I can push the switch in one click and then pull it back out and the lights come back on, other times...


Sounds like the contacts in your switch are going bad. The switch in your high-low beam lever is extremely hard to get to as the steering column will need to come out, if it's the style I recall on a 97. The switch you may be able to find on the web somewhere because if you get it from ford it may be pricey. You will probably need to take it to your local service center to be replaced.

Nov 17, 2010 | Ford F-350 Cars & Trucks

1 Answer

All lights work but my headlights dont, I can pull back on the high beems they work but when I try my head lights they do not.started out they where on and then went out,checked the fuse it looked good


If you have an AUTO off/on/delay this could be malfunctioning, you may also need a need headlight switch however, First check your low beam halogen bulbs if they are bad replace BOTH at the same time they tend to fail at a similar time and this is the least costly repair NOTE wen changing these do not touch bulb with bare hand as oils from your skin can cause the to heat unevenly and explode inside your headlight assembly Use rubber gloves most Parts stores have these available for this reason

Jul 05, 2009 | 2003 Mercury Grand Marquis

2 Answers

1998 ford ranger headlights do not come on when switch is turned


Look under the hood.
There is a large relay which should have some info about lights on it.
I had this exact problem with my dodge ram

Jan 26, 2009 | 1998 Ford Ranger SuperCab

2 Answers

1996 ford ranger headlights not working


It's the dimmer switch in the column.

Jan 06, 2009 | 1996 Ford Ranger SuperCab

2 Answers

Ford Ranger 2002, electrical problem


You have a bad ground, look out by the battery for a bunch of black wires screwed to the body of the car, check that they have a clean and tight connection, scrap off any paint under the wires.

Nov 25, 2008 | 2002 Ford Ranger Regular Cab

3 Answers

Headlights


The only thing that all of your problems have in common is the light switch and the dash wiring harness. The stereo is linked to the light switch because of it's illumination feature' You need to test the light switch with a test light by probing the wires at it's plug.

Aug 26, 2008 | 1991 Ford Ranger Supercab

2 Answers

Ford ranger headlights


check your head light switch

May 25, 2008 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...