Question about 1995 Jeep Grand Cherokee

1 Answer

Front driverside clicking when i turn

When i turn a corner my driverside front clicks like a front wheel drive car when the cv joint is bad

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

You have CV joints in the front also, so it sounds like you have already diagnosed your problem. Go to an auto parts website and look at them. Hope that helps!

Posted on Oct 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front driverside tire hesitates when the vehicle starts moving


Sounds like you have a bad wheel bearing. These cars are known for that. It could also be a bad CV joint [axle] , but it won't usually make your wheel hop. Jack car up and try to move wheel top to bottom. There should be no play at all. Try spinning the wheel while it is off the ground, if it's a bearing, you will hear a grinding noise. If it's a bad CV joint, you will hear a clicking. Let me know if this was helpful to you, and until you get it looked at, I wouldn't drive it, as the wheel can fall right off if it's a bearing. Good luck

Jan 04, 2013 | 1997 Chevrolet Cavalier

1 Answer

Vibration coming from front axle when coming to a stop it gets worse, brakes are good , maybe cv joint?


if you feel the pulsation in brake pedal when stopping. its a warped brake rotor thats causing it. for bad cv joint symtoms--- Unusual noises when making turns. As you are driving on the road and you make a turn at the corner, if you start hearing unusual sounds coming from under the car then this is one of the symptoms of a bad CV joint. These noises will sound like something is clicking beneath the car every time you turn the steering wheel. Evidence of a damaged boot. Steering wheel feels heavier. The steering wheel will start to feel tighter and heavier and you can hardly make simple turns to the left or right. In severe cases you might even feel heavy vibrations like you are driving down a rocky road.

May 02, 2012 | 2004 Jeep Grand Cherokee

1 Answer

Cv joint and boots


Hi Wendy Ann,
Hard to give an exact diagnosis when I can not hear the noise myself. Generally, a bad CV joint will make a clicking sound when you turn a corner. From what you describe, it sounds like you've been ignoring the problem for some time. Due to the mileage on your car, I would recommend that you change both front half axle assemblies. [There are two CV joints/boots on each half axle] This is a common problem on front wheel drive cars.

Nov 20, 2011 | 1983 Honda Accord

2 Answers

Clicking and popping sound coming from the right front tire when I turn a corner.


This sounds to me like you have a drive axle (CV-Joint) going bad on the passenger side. Hope this helps, TJ

Aug 05, 2011 | 1995 Buick Skylark

1 Answer

Just installed new rotors,brake pads, bearings and tie rods to front of 2000 montana. have a whopping sound when driving , this goes away when wheels turned slightly right. when turning right corner hear a...


One of your CV joints are bad, inspect which CV joint needs to be replaced. Roll your windows down and make tight right and left corners in an empty parking lot slowly and listen for the clicking noise. If it's coming from the passenger side window or the drivers side window, which ever side the noise is coming from is the side that the CV joint has failed and will need to be replaced.
Thank you for using FIxya and replacing the front wheel bearing improperly buy hammering the CV joint out instead of using a wheel bearing puller will cause damage to the CV joint as to what you have described. Good luck and keep us posted.

Jul 20, 2010 | 2000 Pontiac Montana

1 Answer

Causes of a clicking sound in right front wheel


If the noise is heard only when turning a corner it will be from a bad constant velocity joint. CV Joint most call the. The inner joint is call a tri pod joint

May 25, 2010 | 1993 Jeep Wrangler

2 Answers

When driving around corners the front end makes a wroubbling sound. on the straigth aways the sound gone. is it the CV joints? wheel bearings? U joints? or what should I be looking for? 98 Ford Escort zx2...


Does it happen turning in both direrctions? It could be cv joints. from a standstill,turn the wheel hard to the right and accelerate in a circle. do the same on a left turn. If you hear a clicking sound, it's bad cv joints. inspect the rubber boot for tears & stress cracks. once the grease escapes,the joint is no good

Feb 16, 2010 | 1998 Ford Escort

1 Answer

CV joint questions


well now,,,il tell you a storie,,,better sit down?
the cv joints are the joints in a drive train that for use of a better word "bend the drive shaft" so it dont brake when you turn a corner,,,ie:parking! inside the cv joint is held on the drive shaft be some splines in the drive shaft and a spring clip holds it all together there is an "inner bell" it has normaly 5 slots in it that have big "ball bearings" in them that slid around up and down these slots on the out side of the cv joint is the outer "bell" this also has slots that the ball bearings fit into so the drive trough the cv is compleat,,,when you turn the wheels the cv joints slids round on these ball bearings twisting round but the drive from the engine is still transmited to the road wheeles trough the cv
when this cv joint starts to were out the ball bearings are pitted and not ball shaped any more and the slots they run in are not smooth that to gets pitted what happens is the cv starts to "crack" under load,,,and vibrate when turning or being driven you drive down the road at 50 mph and the car feels like its driving over stones in the road its vidrating off the cv joint then when you turn the wheel on full lock to pull away you here a very big cracking or clicking sound, like,,,,,click click click, and the more power you put on the more they click very soon people start turning around and look at you? oh yes they here it to!
the vibration that comes off the cv will reck the transmission becouse of the wipping of the drive shafts,,,, to test your cv joints to see if there good or bad one's put the car on full lock and pull away,, if there is a cracking sound or a klicking sound there shot away and you need new ones fitted
now then,,,storie over,,, its time for sleepy sleeps

Jan 20, 2010 | 2007 Honda CR-V

2 Answers

Inner cv joints


inner cv joints are the joints on the inner half of the axle shaftswhere they go into the transmission. sometimes the easiest thing to do is replace the axle shafts

Jan 05, 2009 | 1996 Chrysler LHS

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...