I need to replace the passenger side headlamp...I have a new one, but I can't figure out how to remove the grill, which has to be done in order to get at the headlamp bolts. Anyone know how to remove the grill?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
this item threads into the intake or block depending on make and model.. parts store can tell where its exact location should be..has wires connected to it that get disconnected and it should unscrew out of the mount..instalation is reverse of removeal.
The panels have 3 t20 torx screws on the bottom and one philips head near the mirror. Under pull handles there are 3 philips on the drivers and 2 philips on the passengers sides. Pull the panels from the bottom and lift the panels up. There are 2 black rubber plugs in each door, pop each plug out and the glass is held in place to the clips on each side with either a 10 mm bolt or t30 torx bolt. Move the glass to the point where you can see the bolts, loosen, but don't remove the bolts. Once loose, you can pull the glass loose. Once loose, lower the window a bit, angle the rear of the glass up and pull it out. The glass may be epoxied in place, as VW had a problem with windows coming loose. If so, try to pop the rubber in the clamp loose (above the bolts you see through the holes) and reinstall it with the window removed.
You will have to remove the front bumper and the side marker lens and then you will have acces to the light.There is one screw on ech side by the wheel wells and then the grill also have to come out and then there is a few other screws under there.
on this car there should be a black strip cover on the inside of door handle. take small screw driver and remove it starting from near lock cylinder, pry very gently and cover should come off, then gently peel the cover towards the front of the car until it is off. phillips screw is located in the rear of the door and at the front of the handle.