At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The rubber plugs are to stop dirt blocking the Allen key head! Remove the rubber plugs and undo the 7mm Allen key screws, then calliper can be removed to access the pads! Refit in reverse!
CENTER CONSOLE- Disconnect the battery cables to disable air bag. Wait two minutes before working around steering column, instrument panel or impact sensors. 1. Open console lid and remove the two screws you see toward the front. 2. remove the shift lever knob 3. Rotate the rear of the panel forward, disconnect the electrical connectors, then detach the clips at the front edge by pulling upward. Now panel is free to remove it.
Your car use3s a timing chain not a belt. The water pump will be serviced by first removing the serpentine belt and then removing the water pump pulley and then finally removing the water pump. It is a fairly easy pump to replace.
If you have any further question please ask I I will be happy to help.
Why are you needing to remove the headlight lens? Are you needing to replace the bulbs? In any case, the headlight lens do not come off. Let me know what you are needing to do. Thanks
I have had my engine out (1991 Cougar 5.0), and I did it separately. I do not think both could be removed at the same time with a conventional engine hoist. It is a pain separating them. Be sure to replace the rear main seal!!
You will have to remove the entire door cover. Remove any screws you can see, pop off the cover behind the door handle remove screws behind that, pop off the plastic that holds power window switches and unplug them, then you will have to pull the door panel upwards to remove.
its a lot of work and hassle if you dont know what your doing but its behind the dash,behind the glove box or behind the center console(yup the entrie dash has to pretty much come out)-z
there should be 2 or 3 screws in the bottom of the storage bin. the black trim around your ashtray, ac knobs, and radio is most likely one solid peice this will need removed as well. be gentle that peice is easy to break. at the bottom of that area there is a metal brace you must remove. then you should be able to lift the whole center up and out
gearshifter knob removeal
×