Okay it run fine when i cut it off it will not start back up let it set for 15 min it start. It turn over but nothing take the fuild fuse out put it back in sometime it start right up but today that did not work let it set and it start up please help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Catera has a history of stalling/cutoff issues. Many are solved with the replacement of the crankshaft position sensor. It does give the symptoms you describe. I would try that first as it is fairly cheap and easy to replace. If the problem persists after that, you've at least removed one potential possibility.
This is the description of the crank sensor from AUTOZONE (cost $44.99 USD)
The crankshaft position sensor identifies position of the crankshaft to the ignition control module (ICM), engine control module (ECM) or powertrain control module (PCM)
When not replaced, vehicle may experience no start, hard start, intermittent engine shut down, misfire, engine cut out, excessive fuel consumption, CEL illumination and/or failed emission test
Proper alignment, positioning and spacing for faster, easier installation
Designed to meet or exceed OE specifications in form, fit and function
sounds like no fuel pressure, I had the same problem . theres a molded fuel line between the pump and sending unit inside the tank that was split. , Basically I had a fuel leak inside the gas tank, 2 test pressure the connection is on the fuel rail behind the motor , it should be 40-50 psi
The crankshaft position sensor will do that for you. Have someone check the code, if you don't want to take it to the dealer, rent the computer from autozone( a little expensive, but you'll get your money back when you take it back) If it cranks, but does not fire( try to start) that is what it is. Many people mistake the issue for the fuel pump. It is a common problem with the catera and it is a pain to reach.