Question about 2003 Hyundai Tiburon

1 Answer

New Clutch well not ingage

Install a new clutch & it will not Ingage I have bled the system did not help And don't know what to do.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 53 Answers

I have run into this problem befor a customer brought in a car that he tryed to replace the clutch in and had the same issue unfortunatly the fix was to remove the clutch disc and flip it over as it is in wrong

Posted on Oct 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New A/c compressor


low freon level will prevent clutch from engaging. or disconnected high or low pressure switch

Aug 11, 2012 | 1999 Chevrolet Tahoe

2 Answers

Is there an adjustment on my 97 golf clutch i doesnt start to ingage until the pedal is over half way back up i was wondering if there was an adjustment


You have a hydraulic line for the clutch, so it can be bled to remove air-beyond that, the clutch is just wearing, and it will get lower and lower until you will need to replace the disk.

Jul 20, 2011 | 1997 Volkswagen Golf

1 Answer

Standard shift, v6, 3.2, and can't ingage shifter into gear. Replaced slave cylinder and master cylinder. Bleed unit, after starting it looses pressure on clutch pedal not allowing gear to ingage. With...


Sounds like you may have air trapped in the system.Try this trick.Remove the bleeder screw from the slave cylinder.Place your finger over the hole to act as a one way valve, allowing air and fluid to escape but not allowing air to get sucked back in.Then have someone stroke the pedal slowly making full strokes, keep an eye onn the resevoir so that it does not get low and fill the system with more air.If there is room turn a bottle of brake fluid upsidedown in the resevoir to keep it from running dry.After you have run a bottle of fluid through it replace the bleeder and pump and bleed the old fashioned way a few times.If there is air it should be gone.If clutch will still not disengage the something is wrong with clutch plate and or pressure plate.Good luck!

Mar 02, 2011 | 1992 Isuzu Trooper

1 Answer

Have a 2001 1500 ram 5.2 L. i put a new clutch kit in and worked fine then a month later the clutch doesnt ingage


Have you checked your master cylinder and slave cylinder. One of the two may have failed
Hope this helps give feedback thanks FixYa

Feb 05, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

Put car in reverse after car warms and it doesnt ingage until you push on the gas. It stays in the nuetral position


hi sound like the clutch is worn and your having to use the speed of the engine to help you ingage the gear.Does the clutch slip at all when driving in a forward gear ?

Sep 02, 2010 | 1993 Saturn SC2

1 Answer

How do i know if my whole clutch is out on my rodeo 99?... the pedal is easy to ingage half way down and im not able to switch gears


At a standstill put the car in 3rd gear and try to get the car to move. If it stalls you clutch is fine. If you able to move the vehicle w/o stalling you need a new clutch.

Apr 09, 2010 | 1999 Isuzu Rodeo

2 Answers

Air condition


yes you can go to a parts store and buy2 cans of freon i belive they are called 134A and a adapter and recharge your air yourself for a total of about 40 bucks..

Sep 30, 2008 | 1998 Ford Escort

1 Answer

Air condition


does it have voltage (12v) into the comp clutch if yes / ac clutch gap to wide if you can push it with a screw driver and it restarts (be carful ,engine runnig)

Jul 26, 2008 | 1998 Volvo V70

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

71231 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7001 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...