Question about 2003 Hyundai Accent

1 Answer

Can't locate parts for 2003 Hyndai Accent GT (8000 made that year)

Dealer installed 2004 rear brakes, 2003 didn't fit. Broke the pin in the process. Now can't find the pin. Dealer claims parts for my son's car are becoming obsolete and they can't locate them to replace. Want him to buy a 2009 instead.

Where can he find reproduction, used or new parts? Where can he find the pin?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi not sure of your location? uk? or where? but will try to help i have a dealer you can call ? who deals solely with braking systems cars/ bikes/ hgv trucks etc BRAKES INTERNATIONAL , MOORE STREET ,. ROCHDALE , LANCASHIRE UK TEL No 01706 666999 describe your brakesparts that you req and make model reg/year of car ? feel sure they can help and have post /delivery service hope this is helpful ?

Posted on Oct 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear load sencing valve siezed 1999 frontier


You forget the load sensing valve & just properly
fabricate new brake tubing from the last good fitting
coming from the front

Keep going to the part or next fitting that the valve went to,
the back brakes

Feb 01, 2013 | Cars & Trucks

2 Answers

How do you remove the rear brake caliper on 1996 mercury grand marquis


Removal & Installation
  1. Raise and safely support the vehicle.
  2. Remove the rear wheel and tire assembly.
  3. Remove the brake fitting retaining bolt from the caliper and disconnect the flexible brake hose from the caliper. Plug the hose and the caliper fitting.
  4. Remove the caliper locating pins. Lift the caliper off the rotor and anchor plate using a rotating motion.

WARNING Do NOT pry directly against the plastic piston or damage to the piston will occur.



005ba8a.gif
Rear disc brake caliper removal


1aff680.gif
Rear disc brake caliper installation

To install:
  1. Position the caliper assembly above the rotor with the anti-rattle spring located on the lower adapter support arm. Install the caliper over the rotor with a rotating motion. Make sure the inner pad is properly positioned.
  2. Install the caliper locating pins and start them in the threads by hand. Tighten them to 19-26 ft. lbs. (26-35 Nm).
  3. Install the brake hose on the caliper with a new gasket on each side of the fitting outlet. Insert the retaining bolt and tighten to 30-40 ft. lbs. (40-54 Nm).
  4. Bleed the brake system, install the wheel and tire assembly and lower the vehicle.
  5. Pump the brake pedal prior to moving the vehicle to position the linings.
  6. Road test the vehicle.

May 23, 2010 | 1996 Mercury Grand Marquis

2 Answers

Where do I find front calipar brackets for 2003 elantra


call around your local junk yard
some time after market caliper comes with the bracket but you have to buy the caliper.
at last you can alway go to the dealer, but it may be pricey

Mar 08, 2010 | 2000 Hyundai Accent

1 Answer

Hello i have a 1998 hyndai accent, the rear defoger does not work i need wiring diagram to find the problem or the place of fuse and relay if it has one.


hi from uk the fuse for rear screen demist is located on inner car fuse panel located on drivers glove compartment under steerwheel remove panel then look at the 1st column of fuses on left the fuse you req is listed PR HTD and is 30 amp only! to be fitted hope this helps?

Dec 07, 2009 | Hyundai Motor 1998 Accent

2 Answers

Change hyundai accent 2001 front brake pads


may have siezed caliper slide pins suggest buy reman loaded caliper assembly

Oct 05, 2009 | 2001 Hyundai Accent

1 Answer

Knocking when brakes applied


REAR BRAKE NOISE - SHOE AND LINING KIT
A shoe and lining kit is available for installation if an Elantra (XD) or Accent (LC)
equipped with rear drum brakes exhibits a chattering noise from the rear brakes when
the brakes are applied.

APPLICABLE VEHICLES:
• Accent (LC) and Elantra (XD) equipped with rear drum brakes and in the following
Production Date and VIN Range:
SERVICE PROCEDURE:
For further information, refer to the applicable Shop Manual.
Model Production Date Range VIN Range
ACCENT (LC) May 21,1999 - Dec. 28, 2005 ALL WITH DRUM
BRAKES.
ELANTRA(XD) June 30, 2000 - May 23, 2006 JOB#1-
KMHDN46016V363974

ACCENT SHOE & LINING
KIT
ASSEMBLY
58305-25A00 58305-25F00 7"(00MY - 05MY)
58305-25A10 58305-25F10 8"(00MY - 05MY)

May 03, 2009 | 2003 Hyundai Accent

1 Answer

2003 Hyundai Accent Rear Brake Noise


the rear shoes need to be cleaned and adjusted. nothing to worry about unless it annoys you too much.

Mar 29, 2009 | 2003 Hyundai Accent

1 Answer

How do I unjam a rear passenger seat belt from a hyndai accent 2000


i strongly recommend you take your vehicle to your vehicle's local dealer and have the belt removed from the door and then inspect the belt for damage. A damaged seat belt might break when you need it most. Seatbelts and safety are the most important thing!

Happy to help
Have a nice day!
tc

Jun 02, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2003 Hyundai Accent Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...