Question about 2000 Isuzu Trooper

3 Answers

Fitting 3.1ltr diesel engine to Isuzu Trooper

Have a 2000/001 Isuzu Trooper diesel fitted with a 3ltr engine. Want to remove this and replace with a 3.1ltr diesel.
Can anyone tell me what, if any problems I am likely to encounter.

CipClops

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Yes this is no prob, best get complete 3.1l jeep to do just finished one and it is perfect.

Posted on Apr 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I heard that you would also have to replace the computer, exhaut system and transmission. Is this true? I have a 2001 Troop automatic with the gas engine and would also like to swap it for a Mercedes diesel.

Posted on Aug 28, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Be careful............if the engine you want to fit is made by VM, these have individual cylinder heads. In Europe they have given  a heap of trouble and have to be replaced when they overheat.
If you have a friend who speaks Spanish, get him/her to surf  the net and have him/her translate some of the stuff I've read about here in Spain.
I am looking for a Grand Cherokee and have been advised to look for the 2.7 model engine which is a derivative of the older Mercedes engine.........they last forever and spares are easy to get.
Mike (Madrid) in Spain

Posted on Apr 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Isuzu 3ltr turbo diesel no fuel to injectors


this is USA forum, and we dont have this car.
IT'S NOT A USA 2002 DIESEL trooper.
that and exact engine, size.
we have, 3 gas engines, 2.2L,3.2. and 3.5L
here. only and books that cover only those 3 engines.
so if a diesel dies.
what>?
check fuses.
scan it.
check filters
try test fuel to see if it runs on test fuel
test the glow plugs yet,?

if pump pressure is dead,?
check, power to the pump yet? (fuses are first)

there are 4,.6 and 8cyl. diesels by Isuzu.,
which is it>
they have names.
7 diffr. B engines, 3,xxxx liters.
and
5 diffr. 4Jxx series engines.
my guess is the engine is.
3.0 L 4JX1 TD I4
3.1 L 4JG2 TD I4

wiki says.
"
European and Asian buyers could opt for the diesel engine option of the 4JG2 3.1-liter (later superseded by the more problematic 4JX1 3.0-liter of 159 PS or 117 kW)
4jg2 is indirect injected
4jX1 is direct.
apples and orange diffr.! injection classes. '

learn what's under that hood, then fix it?

what country
what engine, real names, not 3L vague-ness. please.

Apr 21, 2014 | 2002 Isuzu Trooper

1 Answer

Cambelt timing marks 4jx1


sounds like the injector sleeve O rings have failed this was common.
if you put a clear plastic piece of hose on supply line for diesel fuel filter to head fitting at front and fuel is not black but normal diesel colour thats good.
then put clear hose on return line fitting at rear of cylinder head and fuel is now darker, engine oil is by passing injector sleeve top O rings and entering into fuel gallery in head.
rocker cover, injector rail, injectors need removing and injector sleeves need replacing as well as O rings and seats.
a special tool is needed to remove the injector sleeves out of the head. you will also need to drain the cooling system before removing the injector sleeves, so coolant is also needed.
dealers have special tool for injector sleeves

Mar 28, 2014 | 1998 Isuzu Trooper

1 Answer

My Isuzu Bighorn 4JX1 RJM Engine stalled after fitting it with new oil pump. It can crank but is emits smoke but not run. What could be the problem? I have tried to check if the fuel pump is not working...


the engine oil pumps are in the rear of the engine(trans out) and behind flexplate /flywheel, were any of these 2 engine oil pumps touched if so the flywheel /flexplate has to be timed to crankshaft position, so you might have it in the wrong position, if your talking about the diesel lift pump (injector pump) that also supplies high pressure engine oil to injectors, after replacing this there is a learn procedure for the rail pressure control valve that is on pump. this can only be done by dealer or some one with Tech2 scanner tool.

Jan 21, 2011 | 2000 Isuzu Trooper

2 Answers

Can i replace a 3.0litres diesel turbo engine from a 2002 isuzu trooper with a 3.1litres diesel turbo engine.And if possible how can this be done?


Yes you can . Requires some skills but the only bits that dont work after are the speedo and the rev counter .

These can be made to work but its a bit tricky ..

Jan 26, 2010 | 2002 Isuzu Trooper

1 Answer

Trooper will not start after fitting new head


3.0 diesel ? just crank it some more in bursts of ten seconds the fuels run back a bit .

If you took off the fuel return fixture on the back of the head did you put the banjo bolt in the right hole ?

Jan 16, 2010 | 1999 Isuzu Trooper

1 Answer

How do i set flywheel timing on a 3ltr diesel isuzu trooper


#1 on TDC and the small cut out in the flywheel sits at 6o'clock.

Dec 16, 2009 | 2001 Isuzu Trooper

1 Answer

Fitting exaust on isuzu bighorn (trooper) first section from manifold what do i remove to get to it


if you are replacing the small down pipe fron the manifold first remove the middle section and then long extension remove the 2 both and that it if its a 3.1.... easy on a ramp
Dan aka.thetaz@hotmail.co.uk

May 18, 2009 | 1992 Isuzu Trooper

1 Answer

Do 3.1 liter turbo diesel isuzu engines have a one way valve fitted to their turbo cooling hoses?


Can I fit a 3ltr turbo isuzu engine to my 2000 model holden rodeo it is fitted with a 3.2 ltr V6 at the moment

Apr 29, 2009 | 1994 Isuzu Trooper

2 Answers

Manual 1989 trooper 4 cilinder diesel engine


perhaps this is is a good start..will look around more for you also..good luck
http://www.car-stuff.com/mmparts/isuzu-trooper/repair_manual.html

Jan 08, 2009 | 1989 Isuzu Trooper

1 Answer

Isuzu trooper problem!with a 00 3 litre diesel engine not starting


Was it lined up right as the trigger point for the sensor is important.Is the fly wheel fitted one position only that the bolt holes line up or will it fit no matter which position it bolts up Line up the flywheel trigger with the sensor after you have put the engine to Top Dead Centre.Put at tdc and see if the trigger and sensor are together.

Oct 18, 2008 | 2000 Isuzu Trooper

Not finding what you are looking for?
2000 Isuzu Trooper Logo

1,236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...