Question about 1986 Nissan Pickup 4WD 1986

4 Answers

Nissan navara 1986 2.4L petrol timing problem

I have just put new timing chain in my motor and totally stuffed up my timing does anyone know how to set the timing.

Posted by on

  • Anonymous Apr 01, 2014

    Want Nissan to pay for damages they told us the life span of the chain is the life of the motor and the motor is in good nick

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 1,573 Answers

For timing, on 1981 and later 4 cyl engines (from the Haynes manual):
1. Turn camshaft so both valves for #1 cylinder are closed, and turn the crankshaft so #1 piston is at top dead center (woodruff key should be pointing up).
2. Engage the camshaft sprocket (with stamped numbers facing out) into the timing chain, and install the chain around the crankshaft sprocket. The bright links on the chain should be aligned with the timing mark on the crankshaft sprocket (on the right side as you look at it) and with the number "2" stamped into the camshaft sprocket, which should also be on the right side as you look at it.
3. Install the camshaft sprocket onto the camshaft, aligning the camshaft dowel pin with the number "2" hole near the center of the sprocket.

For the firing order and wiring routing for the 8 plug 4 cylinder engine: (Plugs on the intake manifold side are coded "I", and on the exhaust manifold side are coded "E")

Wire to 1I should be connected to tower on the distributor facing directly to the front of the vehicle. Going counterclockwise from there, the order is (1I), 2E, 3I, 1E, 4I, 3E, 2I, and 4E.

Posted on Jan 09, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 1,573 Answers

For timing, on 1981 and later 4 cyl engines (from the Haynes manual):
1. Turn camshaft so both valves for #1 cylinder are closed, and turn the crankshaft so #1 piston is at top dead center (woodruff key should be pointing up).
2. Engage the camshaft sprocket (with stamped numbers facing out) into the timing chain, and install the chain around the crankshaft sprocket. The bright links on the chain should be aligned with the timing mark on the crankshaft sprocket (on the right side as you look at it) and with the number "2" stamped into the camshaft sprocket, which should also be on the right side as you look at it.
3. Install the camshaft sprocket onto the camshaft, aligning the camshaft dowel pin with the number "2" hole near the center of the sprocket.

For the firing order and wiring routing for the 8 plug 4 cylinder engine: (Plugs on the intake manifold side are coded "I", and on the exhaust manifold side are coded "E")

Wire to 1I should be connected to tower on the distributor facing directly to the front of the vehicle. Going counterclockwise from there, the order is (1I), 2E, 3I, 1E, 4I, 3E, 2I, and 4E.

Posted on Dec 12, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Firing order and wiring diagram needed for 1985 Nissan 4 wheel drive. Four cylinder with 8 spark plugs

Posted on Dec 02, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

I had the same situation with an old Datsun Tracker I have been rebuilding and I solved it in the following way.
1 Find top dead centre for cylinder 1 (the one in the front of the engine). This will be when the keyway on the crankshaft is at the top and if the fanbelt pulley is on, the notch in the pulley will be exactly opposite the 0 timing mark on the timing plate. Rotate the engine with spark plugs removed and gearbox in neutral until you get this position. The easiest way to do this is to put a ratchet wrench on the mounting bolt for the fanbelt pulley. On my engine this was a 24mm socket.
2 Check the distributor with cap removed and see if the rotor arm is pointing at the number 1 spark plug lead. Follow the leads to check this carefully. This is to determine if the number 1 cylinder is on its firing stroke. If the rotor arm is not pointing at the number 1 spark plug lead lug in the distributor cap rotate the engine 1 full revolution. Align the marks as described in 1 above and check the distributor again.
3 Remove the timing chain tensioner.
4 Rotate the camshaft until the key or locating dowl pin for the timing chain gear wheel is vertical. In this position the inlet and exhaust valves for number 1 cylinder should be closed. You can see this because the inlet and exhaust cam lobes should be sticking up and not depressing the valves. This is the trickiest part because in muy case the engine was mounted canted over at an angle and it was difficult to judge. I used a steel rule to line up the cam shaft and gear wheel. I then fitted the timeing chain and rechecked the alignment. Tried it a tooth forward and checked, a tooth back and checked. Eventually when I was satisfied I found that there were other timing marks that lined up on the timing gear wheel and the camshaft bearing mountings. Remember to ension the timing chain in the correct direction (i.e. opposite to engine rotation direction).
5 Tighten up everything and replace the chain tensioning device.
6 Rotate the engine and check that the valves open and close in a logical way and don't hit the pistons. Firing order should be 1, 3, 4, 2. Be careful to check the firing order correctly in the distributor. In my case the distributor rotor rotates counter clockwise.
7 When you are happy with your set up reassemble the timing chain cover and tappet cover and start the engine. If you have changed the distributor set up set the distributor timing at top dead centre or -10 degrees.
8 The engine should run without a lot of backfiring. A lot of backfiring means the timing is wrong.
Good luck!!!

Posted on Oct 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the timing on a H4M 1.6 16v petrol (renault nissan - HR16DE) engine. Can anyone provide detailed intructions with images


Download Manual Document in Portable Format

consular.no-ip.net/bmw-manual-z4.pdf
... 16v. It has the H4M motor which uses a timing chain and not a belt ... 2007. Why no spark or fuel? ... How do i set the timing on my Reanault Fluence 1.6 16v.

1860656 Timing a 250 drz suzuki

2007 nissan micra hr16de 1.6 litre petrol manual ... - YouTube? 0:20https://www.youtube.com/watch?v=mTBlM9XuY_MMar 19, 2014 - Uploaded by Charles Trent2007 NISSAN MICRA HR16DE 1.6 LITRE PETROL MANUAL 4 .... Troca do filtro de ar do NISSAN ...2007 nissan note 1.6 petrol engine hr16de - for ... - YouTube? 1:17https://www.youtube.com/watch?v=ghBCFbNSe30Aug 5, 2014 - Uploaded by HALL LANE RECYCLERS2007 NISSAN NOTE 1.6 PETROL ENGINE HR16DE - FOR SALE - HALL ... ?????????? ???????????? ??????? H4M (HR16DE) ??? ...23363374 Checking timing chain89.46.73.75/F/motorcycles/t23363374-checking_timing_chain23363374 checking timing chain My 05 makes a strange noise at low speeds. ... power and no problems starting. recently replaced the drive chain, rear sprockets, rear brakes and oil change. ... They can get hot enough to ignite the fuel before the spark plug has a chance to. ... how to fix your timing chain rattle nissan forum.List of Renault engines - Wikipedia, the free encyclopediahttps://en.wikipedia.org/wiki/List_of_Renault_enginesWikipediaPetrol engine with single-barrel carburetor and parallel valves (a layout often but not .... H4Mk: 1598 cc (updated H4M petrol engine used on Renault Samsung SM3; ... Engines after 2001 got a new injection system and variable valve timing, this ... M9R: 1,995 cc, bore 84mm, stroke 90mm (diesel engine used in Nissan ...ignition timing adjustment hondacivicforumwww.auctionsdirectory.info/.../ignition-timing-adjustment-hondacivicfor...Solution: setting timing by street sniper ok i know this is pretty basic but there was a time when i ... What is the ignition timing for 2002 nissan hardbody 2000i 16v ... Engine loss of power and a shop bypassed fuel pump relay trying to fix fuel injector · When I ... It has the H4M motor which uses a timing chain and not a belt.amazon 6n21a genuine nissan crankshaft camshaftwww.auctionsdirectory.info/.../amazon-6n21a-genuine-nissan-crankshaft...Solution: brand new genuine nissan camshaft crankshaft sensor these are the same sensors you will find at your local ... Cant set timing on 1991 nissan maxima.#Tags best oil to use in 2006 nissan maximadigital1z3rz.usa.cc/term/best-oil-to-use-in-2006-nissan-maximaTags nissan datsun maxima 3 5l 6 cyl engine code vq35de, get the best priced nissan... Engine loss of power and a shop bypassed fuel pump relay trying to fix fuel injector ... 300 front end tends to warble · How do i set the timing on my Reanault Fluence 1.6 16v. It has the H4M motor which uses a timing chain and not a belt.Gasket, Head Set Renault Fluence - Vehicle.provehicle.pro/catalog/renault/.../gasket--head-set-m2741... - Translate this pageGasket, Head Set Renault Fluence. × ... 1.6 16V H4M 729 kW hp; 1.6 16V K4M 751 kW hp; 1.6 dCi R9M 402 kW hp ... Cylinder head - camshaft - timing ... Fuel group ... ???????? Nissan Micra K12 04-11? ( ????? ) ???????? ?? ???????? ? ...RENAULT FLUENCE (L30_) Spark Plug - model 1.6 16V ...www.sparepartstore24.co.uk > ... > 1.6 16V (L301, L30F, L30P, L30R)Spark Plug for RENAULT FLUENCE (L30_) 1.6 16V (L301, L30F, L30P, L30R) ... Electrode gap to be set [mm]: 0,8 ... Fuel Type: CNG/LPG .... Engine Code: H4M .... MINI; MITSUBISHI; NISSAN; OPEL; PEUGEOT; PORSCHE; RENAULT; ROVER ..... Control Unit; Pulse Generator; Resistor; Scale (Ignition Timing); Spark Plug ...Set Timing Nissan - We Are Here To Help You For Free‎Adwww.fixya.com/Set+Timing+Nissan‎Nissan timing Questions & Answers: FixyaNissan Timing Setting - Extensive, Accurate Search Results‎Adwww.peeplo.com/Nissan+Timing+Setting‎Nissan Timing Set Cheap‎Adwww.nextag.com/‎renault engines in nissan carsrenault diesel enginesrenault engine f1renault engines in mercedesrenault engine for salenissan qashqai renault enginerenault engine code locationrenault diesel engine reliability123Next

Dec 13, 2015 | Nissan Cars & Trucks

1 Answer

Z20 engine. what is the optimum idle timing if running on lpg


standard petrol and LPG have very close to the same octane rating so the timing setting for petrol would be the same for the LPG timing setting

Dec 19, 2013 | Cars & Trucks

1 Answer

I HAVE A NISSAN NAVARA 2.5DI 2005 AT WHAT MILAGE DOES TIMING CHAIN NEED CHANGING


Normal life for a timing belt is 80,000 miles, 150,000 or more for a timing chain.

Jun 23, 2012 | Nissan Navara Cars & Trucks

1 Answer

Can you please tell me timing chain set up for nissan navara 2.4 petrol motor year 1999


probably very similar to the early bluebirds or 180Bs..chain goes around all the sprockets,and kept tensioned by a oil pressured tensioner,.normally dont give any problems

Jun 29, 2010 | Cars & Trucks

1 Answer

Nissan navara timing chain marks


I have a Nissan Nivara With the Z24 motor Fitting a new timing chain sprokets guides and adjuster Where does the camshaft numbers 1 2 and3 go

Apr 25, 2009 | 1995 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

2,750 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...