Question about Chrysler LHS

1 Answer

My 2000 chrysler lhs heated seats arent working. I was ju wondering if there is a way to reset this?

Posted by on

  • 3 more comments 
  • Anonymous Oct 29, 2008

    heated seats dont work. where is the fuse- relay switch?

  • readmybook Nov 02, 2008

    On my 1999 LHS the passenger heated seat works fine while the drivers side seat doesn't heat up or turn on ( light on switch doesn't go on either.) I figured if one works the fuse must be ok but someone said the grid on the drivers side must be broken. What do you think?

  • Anonymous Dec 20, 2008

    I have the same problem. My passenger side heated seats works great, but drivers not at all. Where is the relay at that I would need to check?

  • derdner Mar 20, 2009

    Driver side heated seat not working, passenger side is. 2000 Chrysler Town & Country. Help!

  • Anonymous Mar 25, 2009

    im having a problem with it over heating when its just sitting there but when im driving its fine i cant figure out the problem



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Chrysler Master
  • 77,544 Answers

Most likely the relay has failed, check this first.

Posted on Oct 09, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 lhs has no heat installed new radiator, thermostat,heater coil is hot new water pump blend door is working what can i do?

you need to check the valve on the in lines to the heater in between the engine to the wall off under the window. there is to pipe follow them and you will probably find a vale these can seized up and stop working some models have a vacuum pipe on them that opened the valve when the heater is needed.

Oct 16, 2013 | 2000 Chrysler LHS

1 Answer

2000 chrysler lhs wheels/tires leaking air

I have seen complaints about the factory chrome peeling off in the bead area and causing leak. Didn't find a service bulletin for that.
Take it to a tire shop let them look at it, see if they can smooth up the bead area. It would only be in the bead area. In the past, I have used a wire brush adapter that fits in a drill to clean rust off the rim bead area. I don't know if that would work, if chrome was peeling.
As a last resort, replace the rim. I don't think Chrysler is going to help you?

Oct 18, 2017 | 2000 Chrysler LHS

1 Answer

I have a 2000 chrysler lhs and it has 215k miles on it and still runs great engine wise.But awhile ago i was just driving down the road and my ****** stopped shiffting, my spedomete quit working, and my...

I could see one or two modules going out at the same time, however, you speak of a lot more than that happening all at the same time; which makes me think that the ECM or "Brain"/Computer in your car has probably out lived itself. I would start with having your ECM reset to see if that might cure it. If not, then you will have to replace the ECM. Typically on any vehicle with that many miles on, your going to experience more problems then the car is worth.

Sep 29, 2011 | 2000 Chrysler LHS

3 Answers

AC display panel light 2000 Chrysler lhs is not displaying

I how mines open right now, the bulbs are inside the buttons, not the display, its the display thats not works & there arent any bulbs, its just a thin peace of glass

Sep 27, 2011 | 2000 Chrysler LHS

1 Answer

My heated seats went out, and was wondering if it was a fuse and where is this fuse located in the fuse panel?

What you are sitting on is a 9 year old toaster. Toasters draw current, if you do not believe me hold the wire on your kitchen toaster when using it. Current causes heat and heating and cooling destroys parts. If the fuse is blown replacing it will just result in another blown fuse due to the high current. There is probably a small circuit breaker built into the seat itself, I would look there or see if you cannot buy a new replacement toaster from the dealer and have it installed, I imagine that means new seats though. These things never work for too long due to their nature.

Nov 09, 2010 | 2001 Chrysler LHS

1 Answer

Does a 2000 chrysler L H S 3.5 liter have a no tolerance motor?

I know that the *** cars are no tolerance, l'm thinking you should be o.k., why the question is what l'm wondering.

Apr 24, 2010 | 2000 Chrysler LHS

1 Answer

Replaced cracked radiator in 2000 Chrysler LHS but car still overheating. What could be the problem?

fix the radiator first.because coolant temperature sensor need to be in antifreeze.when antifreeze get up to 190 degrees. the coolant sensor act as a resistance decrease then the pcm will command cooling fans to run.if antifreeze low the coolant temperature sensor not going to work. engine is going to over heat.

May 29, 2009 | 2000 Chrysler LHS

2 Answers

Replaced cracked radiator in 2000 Chrysler LHS but car still overheating. What could be the problem?

I had the same problem. My Chrysler LHS kept overheating. I had the thermostat changed out first and it didn't help. Then I had the water pump changed out and still did no good. Then changed out the radiator, still overheated. Come to find out the people that changed my thermostat put it in backwards. Evidently, the thermostats for these cars look different from all the others and people are not sure how to put them in. I took mine to a Chrysler dealer and they fixed it for me.

Apr 15, 2009 | 2000 Chrysler LHS

1 Answer

Chrysler LHS Passanger Seat Just Lays Flat

The the motor is working, but the seat isn't moving, it means the motor assembly is either broken or stripped. You'll have to remove the seat to get to the motor assembly underneath.

Dec 18, 2008 | 2000 Chrysler LHS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides