Question about Hyundai Motor 1999 Tiburon

1 Answer

Obd diagnostic hi, i have a 1999 hyundai coupe f2 evo (tiburon in usa) and i bought a obd diagnostic kit (elm327 obd2-eobd) but it wont connect to my ecu ive tried everything i can think of....any help would be great .. thanks phil

Posted by on

  • 7 more comments 
  • wolfy
    wolfy Oct 08, 2008

    hi,

    thanks for getting back to me...i dont really want to get another obd2 kit as i know this is ok...it transmits but wont recieve data back..i looked on the net to see if my car is obd2 compliant but get mixed reports...is there anything i can do

    thanks

    phil

  • wolfy
    wolfy Oct 09, 2008

    hi,

    ive looked under the hood but found no sticker (maybe its obd1) all the pictures ive seen show my pins in the right place...if its not obd2 compliant would obd1 software work...

    thanks

    phil

  • wolfy
    wolfy Oct 09, 2008

    hi,

    ive looked under the hood but found no sticker (maybe its obd1) all the pictures ive seen show my pins in the right place...if its not obd2 compliant would obd1 software work...

    thanks

    phil

  • wolfy
    wolfy Oct 09, 2008

    hi,
    the kit is from uk and its up to date this is what it states.

    UNIVERSAL ALL-IN-ONE SYSTEM


    UNIVERSAL USB Scanner is the latest PC-based scanning tool. It supports all OBD-II protocols. The output protocol (connection to laptop) is USB, and will cover ALL current protocols, including CAN which is the new standard for all cars in Europe. This hardware will automatically detect which protocol to use.
    OBD2 protocols covered:
    J1850 VPW
    J1850 PWM
    ISO9141-2
    ISO14230-4 (KWP2000)
    ISO15756-4 (CAN-BUS)
    Universal Diagnostic systems for OBD2 compliant cars including the new CAN protocol

    i hope this helps...
    phil.

  • kartie2000 Dec 30, 2008

    Did you fix the problem as I have the same problem

  • panirrrrrr Mar 12, 2009

    Can anyone tell me which protocol hyundai santro xing xp uses, Does it use iso9141 ,where can i confirm it from ..... i think it is iso9141 only

  • yadayada
    yadayada May 11, 2010

    You did not mention the CAN issue, read my post again.

  • yadayada
    yadayada May 11, 2010

    Is this a CAN protocol OBD 2 system ? what country was this exported to? How old is the scanner, look and see if the manual for the scanner lists the ability to read CAN data streams.

  • yadayada
    yadayada May 11, 2010

    Check with Snap-on tools or Mac tools, they have a kit that will work on your car, about $400 US

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 183 Answers

Look under the hood in the engine compartment.The emissions sticker will tell you if it is obd compliant...If it is manufactured in the u.s. since 1996 , federal laws require it to be obd compliant..I would give the manufacturer of the scanner a call to check compatability...Good Luck!!!

Posted on Oct 08, 2008

  • travis campbell Oct 09, 2008

    Call the Hyundai dealership and give them your vin number.They can tell you what system the car has....Good Luck....

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many computers are 1999 mercury mountaineer


It depends , what's the RPO - regular production order code ? Call the dealer with the code an they can tell you . Or hook up a up scale scan tool . one that will talk with all the modules on the computer . You could down load Forscan to you lap top an go on ebay an by a ELM327 wi-fi , this plugs into you OBD2 connector on the vehicle an communicates with the forscan scan tool . It shows all the computers on the vehicle . ELM327 V1 5 OBD II Bluetooth Car Diagnostic Interface Scanner

Nov 13, 2016 | 1999 Mercury Mountaineer

1 Answer

Is the Isuzu 4JB1-TC supported by EOBD or EOBD2


wow no year, are you kidding? not even a name of car, model....
OBD , is by country. why not post your country, this is a USA forum. btw.... so......?????
and by years.
in USA (we invented it ) by US federal mandate.
in 1996 on gas engines, it was upgraded to OBD2 tech.
many countries copied our design and added to it.! or less...
like the European, EOBD or JOBD in JAPAN
and some did this in 2001, or 2006 or 2010 in china.
so the country , year and engine are the factors here, (laws really)
Smog laws dictate this...
and on turbo diesel , they are totally different laws. and dates.

the FSM (factory service manual for your car and country)
answers this question on page 1 of the PCM controls chapter....
read that yet?
on our cars the under hood label stated. OBD2 compliance.
but other countries do no use our labels, ever.!
so again, what country and what year, what car, what truck.
tell more get more.......

Jun 18, 2015 | Isuzu Cars & Trucks

1 Answer

What obd2 protocol does the 2008 0pel astra use


OBD2 is a USA protocol
you never stated your country?
if in say UK, this would be not OBD2 but EOBD.
European OBD. see? our cars are USA OBD2 ( invented it here OBD2 is our protocol)
but in your country it's ISO spec. EOBD. (UK) or?
and in your case, you need that tool for that car. there.
on some cars the RAV4 didnt get OBD2 or EOBD until 2006
so the hood sticker shows that or not.
open hood , look up see stickers? read them here is one.
this is USA EPA tag, your country has its own style tags, look carefully
the EOBD cars in Europe may need a special cable adaptor to work , in USA we have only one, and is a stardard here,....by laws.


04c45594-19a7-4a98-9ed8-c2469f8aa76d.jpg

Jul 15, 2014 | 2004 Toyota RAV4

1 Answer

2002 rodeo is my obd ground bad my ecu wont communicate and horn wont blow but fuse is good


great question, im ane ECU spirt. )EFI.
what country, nobody ever says, that but gee, the OBD varies buy
COUNTRY!
Ill pretend USA. /Canada.

In the USA the car has OBD2. and you need a scan tool that works
on 2002 cars.
what engine, some engines have different ECU. radical differ..
they had like 3 engines here, other countries 9.

the scan tools connects to the 16pin, OBD2 connector at dash.
i the car is Can-bus. it needs a can-bus tool, all new tools work on canbus but old ones never do. (i have them back to 1995 and know this)
NON comms and tool is ok, not wrong tool . diagnosis.


  1. Pin 16 not at 12vdc, (blown fuse)
  2. ECU dead, 99% of time blown fuse to EFI. test the fuses to all EFI parts. alldata.com wiring shows that.
  3. bad wiring to the DCL connector (rare) or from there to ECU
  4. yes, some crappy tools have no ground on both pin 4 and 5, buy a tool that has 2 pins there. OR it will fail on some cars. seen many POS ELM327 tools that do this horror, get a tool called, INNOVA 3160 and stop guessing, this tool works on all cars.
  5. barrow, rent , or buy or ask any sharp mech top scan car , his tool works.
  6. Fuses that look ok can IN FACT be bad, we never assume they ar good we test them. using either method, OHMS or 12vdc on both sides, is better. see? only the voltage matters, all else punts.
  7. The 3.3l communicates on pin 1 and 2..
pin 2 is PCM/ECU. VPW signalling.
and is not can-bus, yet.
simular to this.
http://ww2.justanswer.com/uploads/FO/fordguy4u/2013-03-02_224407_a1.jpg


top right photos
http://www.diagnostics4u.com/uploads/asset_image/2_4.jpg


there you go, you tool must have VPW support on pin 2.

Apr 01, 2014 | 2002 Isuzu Rodeo

2 Answers

Subaru elm327 OBDII issue?


Does the scanner support the newer CAN network data control system used in this car in Europe?

May 18, 2012 | Cars & Trucks

1 Answer

Keeps coming up as a error connection on two


hi i dont know where you live but just a quick heads up on OBD2, in the uk and europe OBD2 did not get put in vehicles untill 2001 as standard, so if you live in europe it will not work on your vehicle from 1992, this is possibly an EOBD type (European Onbored Diagnostice) that doe's anything in europe before 2001, if however you are from the USA Canada, or south america, this should work hope this has helped, if you could send me more information i might be able to point you in the right direction for what diagnostic system will work for you

Feb 07, 2010 | 1992 Volvo 740

1 Answer

Hyundai coupe wont start


did you change your plugs and wires?

Jan 19, 2009 | Hyundai Motor 1999 Tiburon

2 Answers

Dash clock hyundai coupe f2 evo 1999


HI THERE YOU NEED TO REMOVE THE FULL CONSUL FROM AROUND THE SPEEDO AND RADIO

****

Jul 10, 2008 | Hyundai Motor 1999 Tiburon

Not finding what you are looking for?
Hyundai Motor 1999 Tiburon Logo

1,040 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...