Question about 1996 Dodge Stratus

4 Answers

Timing Belt Just replaced the timing belt, but I need to know what the set points are for this belt?

Posted by on

  • 1 more comment 
  • king4220 Jan 13, 2009

    how to lineup timing marks

  • Anonymous Jan 23, 2009

    how to put Timing Belt

  • dicksforrest Jan 24, 2009

    timing marks for timing belt

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I want to know how to set point

Posted on Feb 13, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to change timing belt on a hyundai sonata 2000 with a 2.4 4cylinder need all info. to change timing marks etc. diagram and instructions after covers are off ready to replace.

Posted on Jan 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need a diagram of the timing belt for a 1998 dodge grand caravan with a 3.0 engine

Posted on Dec 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

×

6 Suggested Answers

dennymulford
  • 1055 Answers

SOURCE: Need to change timing belt on a 1981 chevy chevette/ set timing

bottom gear go straight up top gear sets about 2oclock thers a small hole in the gear too line up with a hole in the head use a small drill bit too check this!!!!

Posted on Apr 16, 2009

johnny5846
  • 379 Answers

SOURCE: the timing belt broke, need to know what are the points?

THIS IS YOUR TIMING BELT DIAGRAM .CAMSHAFT AND CRANK PICTURE .

4180ab7.jpg

33d6a22.jpg

Posted on Jan 17, 2009

  • 10 Answers

SOURCE: Timing Belt Replacement+Diagram

This should help you http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008daae

Posted on Nov 02, 2008

ZJLimited
  • 17970 Answers

SOURCE: I need the timing marks to set the crankshaft to top dead center

1986 Dodge Truck RAM 50 4WD 2.6L 2BL 4cyl

Fig. Timing belt and components-2.0L engine
9f07c9a.jpg


Fig. Location and correct alignment of timing marks for the timing belt (camshaft)
6f4c9d6.jpg


Fig. Timing marks-2.3L diesel engine
40625e5.jpg


Fig. Timing marks-2.4L engine
124bdbc.jpg


More details, autozone.com (free register). Good luck.

Posted on Sep 29, 2009

  • 103 Answers

SOURCE: replace timing belt holden vectra 2.2ltre

timing cover has marks on it,line it up with pulley,remove pulley and cover,check to see if any marks on camshaft.un do tensioner.to be sure make your own marks

Posted on Jan 02, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Timing belt broken


The only damage to the head will be bent valves so new valves will fix that end . Get a work shop manual (Aftermarket from a spares shop) (. Follow the pictures and directions closely or you will be doing the valves again .) IT is not TDC but where the timing marks point to . Replace the belt with a new one . AS oil is the killer of belts replace all seals and idler pulleys as well. As you are doing it for your son stay away from the wreckers as the next engine will want a belt as well . Have the job properly and have piece of mind knowing that the car will not let him down at a bad time.

Mar 17, 2014 | 1992 Acura Integra Hatchback

1 Answer

Need to set the timing


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 22, 2012 | 1995 Lexus LS 400

1 Answer

Need diagram/info on how to set timing belt for 1992 Lexus LS 400


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 22, 2012 | 1992 Lexus Ls 400

2 Answers

On 2000 mazda protege 1.6 replaced water pump now won't start, thinking timing now out what is timing procedure?


i dont have a more detailed picture of setting the timing marks for the belt so i hope this helpsonetufshoppe_81.gif

Jan 30, 2011 | 2000 Mazda Protege

1 Answer

I need the timing marks to set the crankshaft to top dead center for a timing belt replacement. I just need a diagram to show me where the timing marks are located, where should the camshaft pulley mark be...


1986 Dodge Truck RAM 50 4WD 2.6L 2BL 4cyl

Fig. Timing belt and components-2.0L engine
9f07c9a.jpg


Fig. Location and correct alignment of timing marks for the timing belt (camshaft)
6f4c9d6.jpg


Fig. Timing marks-2.3L diesel engine
40625e5.jpg


Fig. Timing marks-2.4L engine
124bdbc.jpg


More details, autozone.com (free register). Good luck.

Sep 29, 2009 | 1986 Dodge Ram 50

2 Answers

Opel Corsa timing belt replacement


You need to find the timing marks on both crank and cam pulleys, set it, then take of the belt ane dont let any pulley move! Put on new belt and set the tension of the belt.

Jul 31, 2009 | 2000 Acura Integra

1 Answer

Replaced timing belt need do you start at TDC to


For all timing belts you should start with the crank sprocket pointing at TDC and the cam sprockets pointing at their designated marks.

You should be able to mark the old belt and and put corresponding marks on the cam and crank pulleys, then remove the old belt and transfer the marks to the new belt and install it.

Personally I would buy a manual as this would provide you with a step by step guide to performing the repair.

I am not positive that this is an interference engine, it looks like it is to me. If you are not accurate in your timing you will cause severe engine damage.

Jul 25, 2009 | Isuzu Trooper Cars & Trucks

2 Answers

The timing belt broke, need to know what are the points?


THIS IS YOUR TIMING BELT DIAGRAM .CAMSHAFT AND CRANK PICTURE .

4180ab7.jpg

33d6a22.jpg

Jan 17, 2009 | 2002 Daewoo Nubira

2 Answers

Replacing timing belt and timing after of a kia rio


If you have not removed the distributor, generally, the timing should be as it was (assuming that you have properly indexed the belt pulleys.) Therefore, the engine should start and run after you finish the job.
If for some reason you did change the timing before the belt failed, set the crank pulley at "0" and check that the distributor rotor is pointing to #1 spark plug tower on the cap. This should be sufficient to get you in the "ballpark" Get a manual... if timing is adjustable it will be in there.(as well as lots of other useful stuff!)

Jan 02, 2009 | 2004 Kia Rio

Not finding what you are looking for?
1996 Dodge Stratus Logo

2,206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...