Question about 1990 Nissan 300ZX

1 Answer

Original rear wing 1990 300zx z32 need to know were to get one

Need to know were to get one

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

You may have to look at Kaminari - they're an aftermarket company that makes a wing similar to the OEM TT wing. You may have luck with Courtesy Nissan in Texas though - they have a ton of stuff there ( Or if you don't mind one that is used, call up Z1 Motorsports in GA ( - they're a 300ZX salvage yard and tuning company. They'll have one for sure.

Posted on Oct 08, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a suzuki swift 2002 model the wing mirror glass broke and got a new mirror.The instructions state that you just stick the new mirror to the original bracket but the mirror will not fit in the...

its 1 of 2 things.
1: wrong mirror.
2: or not reading the FSM.

it may be the mirror , needs to be totally dismantled.
and with no photos posted, this is impossible to tell.


Sep 26, 2013 | Suzuki Swift Cars & Trucks

1 Answer

How do i drain my radiator

Look at the bottom of the radiator, either on the front or the rear. You will find a tube with wings sticking out. Some screw in to open, some screw out.

Dec 13, 2012 | 1991 Lexus LS 400

1 Answer

I am trying to replace aleft rear turn signal bulb on a 2005 lacrosse. I removed two wing nuts but cannot remove assmbly. Is there another wing nut holding it in. I cannot find it?

3 wing nuts. here is the info needed.

gmlogoflat.gif Service Information
2005 Buick LaCrosse ' Allure, LaCrosse VIN W Service Manual ' Body ' Lighting Systems ' Repair Instructions ' Document ID: 1537542 Tail Lamp, Turn Signal Lamp, High Mount Stop Lamp, License Lamp, Backup Lamp Replacement - Rear
Component Name
Notice: Refer to Fastener Notice in the Preface section.
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
Turn Signal/Stop Lamp Assembly Replacement - Rear 1
Nut, Turn Signal/Tail Lamp (Qty: 3)
Pull back rear compartment carpet to gain access to lamp.
2 N·m (18 lb in)
Lamp, Turn Signal/Tail Lamp
Twist the bulb socket and pull inward to replace the bulb.
License Lamp Replacement 3
Screws, License Lamp (Qty: 2)
2 N·m (18 lb in)
Lamp, License Lamp
Twist the bulb socket and pull inward to replace the bulb.

Jul 29, 2011 | Buick LaCrosse Cars & Trucks

1 Answer

Need to replace rear brake light just pull hard and the bulb will come out of the hole

Please don't forget to rate! Thanks!

  1. Disconnect the negative battery cable.
  2. Remove wing-nuts attaching tail lamp to rear closure panel.
  3. Remove lamp from opening in quarter panel.
  4. Disconnect wire connector from back of tail lamp.
  5. Remove tail lamp from vehicle.
  6. To install, reverse removal procedure.


Locating wing nuts (2) in the trunk (1)


Removing taillight (1) and connector (2)


Identifying taillight components

Jan 22, 2011 | 2000 Plymouth Breeze

1 Answer

I am removing a rear wing and needing to weld another one on how do i do this? i need to know how to remove this damaged wing and weld a new section on if possible could u draw something fo me to follow

there should be bolts on the under neath of the trunk hatch and it should come off rather easily with no welding or cutting, then find an oem or after market that has the same bolt pattern and put it back n the way you took it off, if the bolt pattern isnt the same and you really want it on there, then drill holes and make the mounting cover the old holes so you cant see em

Jul 03, 2010 | 2001 Ford Focus

1 Answer

How do I change front blinker bulb on 2003 chev impala

  1. Turn the engine off and open the hood. Pry up the two fasteners from the radiator air baffle with a flat head screwdriver. Move the baffle to the side to access the top of the headlight case.
  2. Step 2 Pull up the two metal rods behind the headlight case. These secure the case to the car. You may need your pliers to pull them up.
  3. Step 3 Gently pull the headlight case out to access its rear. On the rear, you will find several black dust covers. Twist off the dust cover closest to the fender (the outward dust cover) to access the turn signal bulb.
  4. Step 4 Turn the bulb module counterclockwise to release it. Unplug the electrical connector from the bulb module. Connect the new bulb to the electrical connector (don't touch the glass with your hands; hold it by the plastic piece). Insert the bulb module in the turn signal housing, turn it clockwise and screw the dust cover back on.
  5. Step 5 Insert the headlight case in the mount. Push the pins back down to secure it. Position the radiator baffle in its place and insert the fasteners.
  6. Rear Turn Signal Bulbs
  7. Step 1 Open the trunk. Remove the net from the side mounted wing nut (on the side with the faulty turn signal). Twist the wing nuts (there are two per side) counterclockwise to remove them.
  8. Step 2 Peel the carpet layer back to access the rear signal lamp wing nuts. Twist these wing nuts (two per side) counterclockwise to remove them and release the rear signal.
  9. Step 3 Carefully pull the rear signal assembly away from the Impala. The rear turn signal is the inner bulb (closest to the trunk). Press the tab on the bulb module and turn it counterclockwise to release it from the rear signal assembly.
  10. Step 4 Pull the old bulb straight off the module (don't twist). Insert the new bulb in the module. Depress the tab on the connection and insert the module back in the assembly. Twist it clockwise.
  11. Step 5 Insert the rear signal assembly. Re-attach the assembly's wing nuts and push the carpet layer back in place. Tighten the other two wing nuts to secure the carpet layer and reconnect the cargo net

May 09, 2010 | 2003 Chevrolet Impala

1 Answer

I have been told to fix my microchips of my spolier therefore i have done this and it still does not work what elce could it be? I have also been told that it might not work because the front spolier does...

the active aero system works the front and the rear at the same time,it goes thru the switch at the center console-if the front does not work,the rear will not work also even if you replace the limiter switches on the rear wing,the rear wing has to be timed to the wing motor to work also-it is pretty hard if you dont know how to do it-good luck

Jun 20, 2009 | 1994 Mitsubishi 3000GT

1 Answer

Need to know how to change brake light on 1997 buick lesabra lim

There should be wing nuts on the backside in the rear body panel. You need to take the trim of the rt or left side you also may have to take the sill plate off for access.

Jan 24, 2009 | 1997 Buick LeSabre

1 Answer

Need an owners handbook for a 1990 auto TT

good manuals are hard to come by for the z32 models, they have cd manuals on ebay for cheap, but i bought one of those and you get what you pay for. if you watch close on ebay you can sometimes find an original shop manual for the z32, they have a grey cover with red lettering and are approx 500 pages, they tell you EVERYTHING. they run about $70-$90 i know thats not cheap but if your doing a lot of wrenching on a z32 its well worth it. also make sure you dont get the auto body edition as it looks the same as the mechanic but it says body manual on it. if you want post your problems and ill check it out.

Oct 23, 2008 | 1990 Nissan 300ZX

Not finding what you are looking for?
1990 Nissan 300ZX Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

78936 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides