Question about 2005 Ford F-150

1 Answer

IAT sensor Would like to locate the IAT sensor on my 2005 f 150 with a 4.6 engine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

The IAT has been integrated with the MAF and cannot be accessed seperatley,

Jim

Posted on Oct 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the iat sensor located on a 2011 dodge challenger 3.6 liter engine


The intake air temperature (IAT) sensor is located on the intake tube. Simply lift up on the engine cover to remove the cover. Near the front of the engine on the intake air tube will be a small 2 wire sensor, this is the IAT. Lift the release tab and rotate 1/4 turn to the left to remove it.

Nate

Mar 30, 2015 | Dodge Challenger Cars & Trucks

1 Answer

Iat location


The IAT (Intake Air Temperature) sensor is plugged into the Air-Cleaner housing. One end of the sensor will be found held in place by a rubber grommet and the other end will have a two wire plug attached to it.

Mar 07, 2014 | Cars & Trucks

1 Answer

Where is the IAT sensor on the 1993 corvette


Hi Terry:
The IAT sensor is a thermistor which supplies intake air temperature information to the PCM. The IAT is located in or near the air intake duct.

3_1_2012_3_27_41_pm.jpg

Fig. 1: On VIN 8 engines, the MAT (or IAT) is mounted in the intake plenum


3_1_2012_3_28_07_pm.jpg

Fig. 2: On most vehicles, the IAT sensor is threaded into the throttle body extension

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Mar 01, 2012 | Cars & Trucks

1 Answer

Need to wireing diagram for iat sensor


Vehicles: all computer-controlled internal compustions engines equipped with an IAT (Intake Air Temperature) sensor

Intake Air Temperature (IAT) Sensor

Operation - IAT

This sensor is a resistor based sensor which detects the intake air temperature. According to the intake air temperature reading the ECM/PCM will control the necessary amount of fuel injection.

ECM = Engine Control Module (aka "the car's computer")
PCM = Powertrain Control Module (aka "the car's computer")

Dec 04, 2011 | Cars & Trucks

2 Answers

I need to find the intake air temperture sensor in my dodge


depends on the engine...
3.7 liter, #1 below:

jturcotte_112.jpg

4.7 liter:

jturcotte_113.jpg

5.7 liter, #2 below:

jturcotte_114.jpg

Jan 01, 2011 | 2006 Dodge Ram 1500

1 Answer

Where is the iat sensor located on a 1999 chevy cavalier 4cyl


The Intake Air Temperature (IAT) sensor determines the air temperature inside the intake manifold. Resistance changes in response to the ambient air temperature. The sensor has a negative temperature coefficient. As the temperature of the sensor rises the resistance across the sensor decreases. This provides a signal to the PCM indicating the temperature of the incoming air charge. This sensor helps the PCM to determine spark timing and air/fuel ratio. Information from this sensor is added to the pressure sensor information to calculate the air mass being sent to the cylinders. The IAT is a two wire sensor, a 5-volt reference signal is sent to the sensor and the signal return is based upon the change in the measured resistance due to temperature.

a8b6fbb.jpg

Fig. 1: The IAT sensor is located in the air cleaner outlet tube-2.2L engine and 2.4L engine

Hope helped.

Apr 11, 2010 | 1999 Chevrolet Cavalier

1 Answer

Location of IAT sensor in the car?


For Hyundai Car 1999-05 - Intake Air Temperature (IAT) Sensor Location (check several options):

1.- The IAT sensor is located against the firewall to the left side of the engine. It is combined with the Manifold Absolute Pressure (MAP) sensor.

2.- This sensor is located in the air intake plenum assembly. On some vehicles this sensor is combined with the MAP/MAF sensor.

3.- The IAT sensor is located in the air plenum assembly. On some vehicles it is combined with the MAF sensor.

4.- This sensor is located in the air intake plenum assembly. On some vehicles this sensor is combined with the MAP/MAF sensor.

5.- This sensor is located in the air intake plenum assembly. It is combined with the Manifold Absolute Pressure (AFS) sensor.

6.- This sensor is located in the air intake plenum assembly. It is combined with the Manifold Absolute Pressure (AFS) sensor.


In the next graphic, check the position 2...

caae1be.gif

FIG : Underhood sensor locations-Elantra 2004-2005 2.0L engine


Hope this help (remember comment and rated this) TY for using Fixya.

Apr 08, 2010 | 2004 Hyundai Elantra

2 Answers

Code came back as iat sensor reading high


IAT stands for Air Intake Temperature Sensor and it is located in the intake tube coming from the air filter box tot he engine. Easiest way to find it is look at the top of your engine where it says 2200. Coming right out of that manifold is a black ribbed tube about the size of a baseball to softball. It should be going towards the direction on the front drivers side. on the back side of that tube, about 4 inches away from the intake manifold (the things that says 2200) is a plug with wires. That is your IAT Sensor. If it is unplugged, plug it back in. Otherwise unplug it and replace it. Make sure to disconnect the battery while you do this so the computer resets itself after the new one is installed. Thanks and please don't forget to rate!

Jul 15, 2009 | 2001 Pontiac Sunfire

1 Answer

Need location of IAT sensor on 05 F150 5.4L


the IAT is a small round sensor with 2 wire going to it, the sensor is located in the air filter housing lid or in the flexible air intake hose to the engine from the air cleaner box.

here is a picture
1ad160e.jpg

Mar 30, 2009 | 2005 Ford F-150

2 Answers

I cant find the IAT sensor on my 98 ford explorer XLT v 6 SOHC


Try “autozone.com” or your local library for diagrams and step by step instructions.

Mar 12, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
2005 Ford F-150 Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...