Question about 1991 Mitsubishi Mighty Max

1 Answer

What diesel engine fits in a 1987 mitsubishi mighty max 4/4

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have one of these and I converted it to Diesel. I installed a Mitsubishi 4D56 2.5L Turbo inside the hood and runs much faster, more economic and more power than its old 2.0L Gasoline engine.

Posted on Jul 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change the back shock on a 1987 Mitsubishi mighty max 2.0 5 speed truck


Basically, remove the old one and fit a new one.:) If the shocks are inside a coil spring, you ay need to use 'spring compressor'. If it's using lef springs, it's very straightforward.

May 13, 2014 | Mitsubishi Mighty Max Cars & Trucks

1 Answer

Fuel pump location on a 1987 Mitsubishi mighty max


Electric pumps are located either in the tank, or in a little protective box or cover right near the tank (like Subarus, some toyotas, hondas). Check around the tank, maybe follow the fuel line back from the front-you'll find it.

Dec 05, 2011 | 1987 Mitsubishi Mighty Max

1 Answer

Where to install freon in 88 mitsubishi mighty max


DO IT YOURSELFER WOULD USE LOW PRESSURE SIDE OF SYSTEM
LOW PRESSURE FITTING IS ON SUCTION SIDE OF COMPRESSOR
LINE IS USUALLY BIGGER AND COMES FROM FIREWALL FITTING
IS A QUICK CONNECT CAP OFF WITH PLASTIC CAP SCREWED ON
COULD BE BLACK OR BLUE THE PRESSURE LINE GOES TO FRONT OF CAR
FITTING IS LARGER AND CAP COULD BE RED OR BLACK (DO NOT USE THIS)
CONNECT YOUR QUICK FILL TOP UP CAN PER INSTRUCTION WHILE ENGINE IS RUNNING
AND A/C SYSTEM IS ON BLOWER MOTOR ON HI AND WINDOWS LOWERED
COMPRESSOR WILL ENGAGED AND **** LIQUIDE IN DISCONECT CAN WHEN FINISH
AND LET SYSTEM RUN A BIT BEFORE SHUTING OFF WHERE GLOVES AND SAFETY GLASS WHEN DOING THIS FROST BITE IS SERIOUS IF SOMTHING GOES WRONG
GOOD LUCK AND BE SAFE

Apr 27, 2011 | 1987 Mitsubishi Mighty Max

1 Answer

Engine knocking


could be a valve out, and or loud injectors

Nov 03, 2009 | 1987 Mitsubishi Mighty Max

1 Answer

The cheack engine lights on, on my 1992 mits mighty max, how do u read ob1 codes? my harness wont read


Don't waste YOUR time. Let the experts do it for free.
PepBoys will read it for 88 Dollars. Autozone will do it for free.
Get moving!! Don't distroy an engine for a few minutes of travel time.
-Jim

Oct 17, 2009 | 1987 Mitsubishi Mighty Max

1 Answer

Torque specs for mighty max


Per my Chilton's manual tehe bolts should be (cold engine) 65 to 72 FT. Pnds., the cam shaft bearing bolts should be 8x25 = 15 - 19 Ft pnds and the 8x65 should be 14 - 15 Ft Pnds.

The sequence is as follows for the (10 ) head bolts:

7 - 5 - 2 - 4 - 10

9 - 3 - 1 - 6 - 8

I hope this may help,
Tom

Oct 12, 2009 | 1991 Mitsubishi Mighty Max

1 Answer

I have a 1987 Mitsubishi mighty max; how tight should the head bolts be? What should the torque be?


85 foot lbs start in center work your way out start at 45 ft lbs then 65 then 85

Jul 19, 2009 | 1987 Mitsubishi Mighty Max

Not finding what you are looking for?
1991 Mitsubishi Mighty Max Logo

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...