Question about 1994 Ford Probe

2 Answers

Car where can i get a set of injectors for my ford probe 1994

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Probetalk.com is a great source for any used probe parts at cheap price's also.

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 61,037 Answers

You can obtain rebuilt injectors from an online parts store called rockauto.com, around $36.00 each, new ones are over $200 each. This company has the best prices on the net and are very fast to deliver the ordered parts.

Posted on Oct 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After by by passing immoboliser on '94 ford probe,I have feed to the distributor but no spark at plugs


bypassed its immobiliser ...
yep that would be right
wont have spark at the plugs yet

i dont think fixya would like instructions given out to sort your problem

tow to the probe an auto electrician

you will need a full engine bay loom wiring diagram

other ECU wires need power at crank
the crank angle sensor has to have power feed
the injectors and fuel pump also need power

May 18, 2016 | 1994 Ford Probe

1 Answer

My ford probe gt was going down the road, died as i was driving it. will not start


You will need to find out if you lost spark to the plugs or fuel to the injectors to proceed.
Let me know if you need more info.

Jul 24, 2012 | 1994 Ford Probe

1 Answer

94 ford probe error code 51 flashing


The code 51 is for the Injector circuit. There is either a bad injector or a harness issue.

I would start by having all injectors checked. If any are found bad, they will need to be replaced.

Hope this helps.

Apr 17, 2012 | 1994 Ford Probe

1 Answer

Front wheel bearings 1994 ford probe


Since I am out in the middle of nowhere with internet, a woodsplitter, and no hydraulic press, I removed the hub assembly from vehicle and used the hydraulic woodsplitter to press the bearings out. An adapter can me made to cover the blade and provide a flat surface.

Feb 17, 2012 | 1994 Ford Probe

1 Answer

My 94 ford explorer 4.0 cranks but wont start. i have 38lbs of fuel at rail port and spark at wire. it also runs on etherfor a hot second. what else can i try?


Check your injector circuit. It will also let you know if the PCM is allowing the injectors to energize. Here's how:
Pull off one injector connector. Turn key to on. Use a test light and clip the black lead of tester to ground, Use the tester's probe to probe both wires in the injector connector. One of the wires should have power and light the testlight, meaning the injector power circuit is working. Now for the injector ground circuit.
Move the black lead of testlight to the battery positive post. Now probe the wire in the connector that did not light up. Have someone crank the car over. When cranking the test light SHOULD be blinking, meaning the PCM is properly grounding the injectors to work. If both wires passed the test, your injector circuit is good.
If it's not working,either the power circuit from ignition switch to injectors is out (no steady light), or the ground circuit from injectors to PCM is not working (no blinking light).
Good luck, post back with results for further assistance.

Nov 29, 2011 | 1994 Ford Explorer Limited

1 Answer

1994 Ford Probe GT Transmission


OK..............There is no transmission fluid just clutch fluid. Its in a small reservoir on the firewall. I think you have a worn clutch or it needs the lines adjusted. If the clutch doesn't engage until the pedal it almost at the top then you need to adjust it or replace it. The cleaner you put in is irrelevant to your problem. There is gear oil in the transmission though but that's not the problem either. The clutch cable is easy to adjust, just loosen the lock nut and spin the cable adjuster until the pedal feels right. Hope this helps :)

Jul 05, 2010 | 1994 Ford Probe

1 Answer

1994 ford probe v6 5 spd all gears work except


Mileage, Trans flush, or throw out bearing

Mar 19, 2010 | 1994 Ford Probe

1 Answer

1994 Ford Probe Air Bag light is on


Common fault on FORD

Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.


Just push it together properly and it should clear the AirBag fault


Sep 03, 2009 | 1994 Ford Probe

1 Answer

No sound from stereo in 1994 ford probe


did you use a converter plug set for your factory wiring or did you do the siring your self. If you used a factory plug converter then your radio is probably bad, if you did the wiring yourself then check your splices and get a diagram for the wirring before you send the radio back. If you want a easy way to wire the radio in correctly the first time go to cruthfield and buy the converter cable for your radio and vehicle. Its $10 and saves you a lot of time an energy.

tepfy

Mar 19, 2009 | 1994 Ford Probe

1 Answer

94 ford probe


You possibly picked up some sediment from the bottom of your tank that may be clogging your injectors.

Jul 22, 2008 | 1994 Ford Probe

Not finding what you are looking for?
1994 Ford Probe Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...