Question about 2002 Chevrolet TrailBlazer
You dont need to take out the filter plastic assembly or the battery, in one side of the headlight body you can find a latch, get it up and all the headlamp body is going to be easily removed if you pull it out, in order to facilitate change of bulb disconnect harness of sidesmall light, take out round rubber cover and replace bulb, take care of do not take out plastic lense because it can be broken.
Posted on Nov 19, 2008
All you have to do is find the "round rubber
cover" on the back of the headlamp, pry it out with a flathead
screwdriver and the lamp is right there.
To remove the headlamp assembly on a Trailblazer, remove the plastic panel that covers the hood latch assembly.
Take the cover for the air filter in order to get to the low beam cover.
Take the 3 screws out of the air filter cover and remove. You will then be able to get to the back of the low beam lamp. The high beam is reachable without this hassle.
Posted on Oct 07, 2008
Tips for a great answer:
Dec 24, 2014 | 2002 Chevrolet TrailBlazer
Nov 27, 2011 | 2002 Chevrolet TrailBlazer
Oct 13, 2010 | 2002 Chevrolet TrailBlazer
Jul 10, 2010 | 2002 Chevrolet TrailBlazer
Jun 25, 2010 | 2002 Chevrolet TrailBlazer
Oct 24, 2009 | 2002 Chevrolet TrailBlazer
May 02, 2009 | 2002 Chevrolet TrailBlazer
Mar 21, 2009 | 2002 Chevrolet TrailBlazer
454 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: