Question about 1987 Chevrolet S-10 Pickup

1 Answer

Starter replacment Replace engine starter 1987 s-10

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

If you are a larger person, you will need to get the front end into the air so you can move under it. Make certain to block the wheels! I had to take off a bar that ran under my starter before I could completely remove the starter. When I took the starter off, a plate fell to the ground. I didn't know what it went to, so I didn't put it back in. I wound up having to take the starter loose again to replace the plate, turned out it was a shim and was needed to help the starter last as long as possible. Also, the first rebuilt starter I bought was faulty. All in all I had to take the starter loose three times before I was done. Works fantastic now!

Posted on Nov 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having to replace my starter motor after it burnt out following it staying in the start position - how do I go about removing the old one to put in the new


Sandra, the procedure for removing and replacing starter varies from vehicle year,make, model and engine. Re POST year, make, model,engine and complete question so we, here at fixya can answer your question effectively.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Replace Your Starter AutoZone Car Care
Car starter see how to replace auto starters with this step by step guide
How to Replace Car Starter Motor

Aug 21, 2016 | Cars & Trucks

1 Answer

Every 6 months must replace starter.


Anon. Do you have to crank the engine over a lot to get the engine started, do you need a tune up? If it a factory stock engine and you are sure it is correct starter and installed properly (with shims if required for meshing gap), makes me think there may be a damaged ring gear on the flywheel/flexplate. Also make sure starter is quality part.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Have to Replace the Starter About Every 6 Months or So What Is
How to Properly Shim Starter
ebay replacement starters avoid them

Apr 26, 2016 | Cars & Trucks

1 Answer

I have a problem with my 1998 chevy cavalier. When I turned over the engine it started fine for the first 6 starts after I put a different 2.4L engine in. Now when I start it the starter stays engaged...


change the starter or replace the starter solenoid,and make sure when you replace the engine you didnt pinch a wire between the engine block and the transmission

Jul 09, 2014 | Cars & Trucks

1 Answer

Replace starter


Locate starter on engine disconnect battery go to starter remove wiring and unbolt starter from engine

Mar 27, 2014 | 2002 Volkswagen Passat

1 Answer

Starter relay location on 1999 durango 4x4


Its located in the under hood engine compartment fuse box.

There will be three same relays.One for fuel pump and other for horn and bit bigger one for starter controlling.

For more help regarding starter

CAR STARTER REMOVAL? TESTING


One Wire From Starter Motor Goes To Solenoid And Other Goes To BATTERY. Starter GETS 12 VOLT SUPPLY FROM BATTERY AND WITH THESE VOLTAGE IT TURNS THE MOTOR AND THIS TRIGGERS THE STARTER SOLENOID AND YOUR VEHICLE RUNS.============

For your help there are few relatively help links showing how to remove and install starter with proper instructions:-----

These help links will help.

Click the link below:-----


How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

-----------

How to replace starter in car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-starter-in-car.html

-----------

How to replace Starter on Infiniti Q45?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-starter-on-infiniti-q45.html

----------

2006 GM Montana: How to replace Starter Solenoid?

http://repairhelpcenter.blogspot.in/2012/06/2006-gm-montana-how-to-replace-starter.html

-----

Saturn SL2: How to replace Starter Motor?

http://howtobyme.blogspot.in/2012/06/saturn-sl2-how-to-replace-starter-motor.html

--------

Saturn SL2 Starter Wiring Diagram?

http://schematicsdiagram.blogspot.in/2012/06/saturn-sl2-starter-wiring-diagram.html

----------

Oldsmobile starter solenoid replacement procedure?...

--------------------

How to replace Oldsmobile starter moor?

----------

Oldsmobile starter motor testing?

-------------

Oldsmobile STARTER MOTOR NOISE DIAGNOSIS?

------------

These details will help.

Thanks.

Nov 28, 2012 | 1999 Dodge Durango

1 Answer

Remove starter from 300touring 2006


Instructions
    • Lift the hood and find the battery. Disconnect both battery cables, starting with the negative cable first. You will need an open-ended wrench to loosen the nuts on the cable ends.
    • 2Jack your Chrysler up. Place it on jack stands, placing the stands under the frame. Locate the old starter on the bottom of the engine. Remove the heat shield from around the starter and remove the two wires running to the starter.
    • 3
    • Remove the three bolts holding the starter to the engine. Turn the starter toward the engine and pull the starter out. The starter must be in the right position to get it past the motor mount. Work the starter down and out, then lay it aside. The starter has a core value you will get back when you return it to where you purchased it.
    • 4Work the new starter back up past the motor mount and put the starter in place. Be sure to line up the starter shim and replace all three bolts. You will need a socket and extension and a ratchet to replace the bolts.
    • 5Replace the two wires to the starter. Double check all bolts to ensure they are tight. Replace the heat shield around the starter. Jack up the vehicle and remove the jack stands from under the frame. Let the car down.
    • 6Clean both battery cable ends. Replace them on the battery and tighten with a wrench.

Aug 23, 2012 | 2006 Chrysler 300

1 Answer

Had to replace a blown engine on a 2005 ford escape xls


Check battery cables for corrosion and good connection.
Try to boost it with jump starter.
Try to tap on starter while attempt to start.
To me sounds like a bad starter.

Jul 21, 2010 | 1998 Toyota Corolla

2 Answers

How to replace a starter on a toyota solara v6


You take out the battery, and the air-filter housing to give extra working space.
Then push in the starter motor to its place, and hand-tighten all its bolts.
Wrench tighten the starter bolts to the engine 38.ft-lb
Connect the solenoid wire, and tighten to 10.ft-lb
Connect the battery positive cable, and tighten to13.ft-lb.
Replace the air-filter housing.
Replace the battery, and terminals.
Crank-up the car.

Nov 30, 2009 | 1999 Toyota Camry Solara

1 Answer

I need to replace the starter on my 86 buick lesabre with a 3.0 motor. Is this the hard one to replace were you have to take the manifold off?


Get it from UNDER Front Of Engine


STARTER NOISE DIAGNOSTIC PROCEDURE
STARTER NOISE DURING CRANKING: REMOVE 1 - 0.O15" DOUBLE SHIM OR ADD SINGLE 0.015" SHIM TO OUTER BOLT ONLY. HIGH PITCHED WHINE AFTER ENGINE FIRES: ADD 0.015" DOUBLE SHIMS UNTIL NOISE DISAPPEARS (NOT TO EXCEED 0.045").

Remove or Disconnect
  1. Negative battery lead at the battery.
  2. Hoist car.
  3. Starter motor-to-engine bolts, then lower the starter.
  4. Leads.
  5. Starter.
Install or Connect
  1. Starter.
  2. Leads to starter.
  3. Starter to engine bolts. Tighten to 43 Nm. (32 lbs. ft.) .
  4. Lower car.
  5. Negative battery cable.

Sep 10, 2009 | 1986 Buick LeSabre

2 Answers

Parked 91 trooper went to start week later starter clicking, replace starter still same problem replaced battery same thing. replace starter relay fuse dose same thing hear clicking on starter,losen...


is it a rappid clicking if so bad batt. if single click bad starter rappid click somtimes mean dirty cables or bad ground single click is bad starter could be silanoid or contacks

Feb 19, 2009 | 1991 Isuzu Trooper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...