- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
According to the service manual for my 2006 VUE, 2 bolts in front and 5 bolts behind the rear seat is all you need to remove to get the whole seat out. Removal of any components of the rear seat always starts with "remove the rear seat assembly".
They are located in the head.To gain access you need to remove the cover on top of the engine and unplug the ignition module once these are removed the plugs are in the cylinder head and accessible with a 5/8 spark plug socket and extension. Some ecotechs have an additional plastic cover that need removed before you can access the coil cover and ignition module.
its not the module,,its more than likely the drivers side seat heater element,i would say the seatback element,remove the seat cover,just unlatch it under the seat from the rear of seat under it and then pull up its velcrod on,,and then youll see a little burn on the heater pad and thats your problem,then you need a new element,,,thats why theydont work,it causes a open in the system
just did one today. removed housing from car, and used a press . be careful of aluminum housing. also used penatrating spray. clean oxidation from inside bearing hole,then lubricating, helped in installation