Question about 1985 Toyota Pickup

1 Answer

87 4Runner 22RE problem

I just installed a Jasper rebuilt 22RE engine in my '87 4Runner. Everything went together OK but the #1 cylinder misses frequently robbing power and leaving the plug a mess. Compression is good and even between cylinders; valves properly adjusted; plug, plug wire, distributor cap, and rotor all swapped out without effect. New O-rings were installed on the fuel injectors during the installation. Additionally, the engine light comes on between about 68 & 72 MPH and it flashes 3 times occasionally when decelerating. Any suggestions on my next move? Craig 1985 Toyota PU with 22RE engine. Missing only on #1. Spark strong, compression good. Injector appears to be buzzing under stethoscope. Any ideas out there? Thanks

Posted by on

  • Anonymous Mar 23, 2014

    car dies after warmed up. now will not restart. fuel pump is working but there is no spark from the distributor the timing belt is still good and all cylinders have compression

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

Replace the number one injector; it is sticking open.

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 K-Blazer that we rebuilt a high output jasper engine for that came out of a 1984 Caprice, it keeps fouling the plugs after only running for a short while


EGR valve sticking or bad vacuum leak, might be a place to start. I presume the ECM, control module are functioning properly?

Apr 21, 2014 | 1991 Chevrolet S-10 Blazer

1 Answer

Need used or rebuilt engine off altima 93


This is just a chat room--- no one works for
FixYa or has any info

Have to find a motor locally at a salvage yard
or install a reman from Jasper Engines etc

Aug 27, 2013 | 1993 Nissan Altima

1 Answer

The reverse went out in the transmission then later the rest of the gears went out


Unfortunately, these vehicles are known to have transmission problems. You'll need a rebuild, or you'll have to buy a rebuilt or new transmission and install it.

I recommend going with a fresh rebuild or buying a rebuilt/new transmission. Junkyard or "used" transmissions from these vehicles are prone to the same problems that yours is currently having. Most rebuilders such as Jasper will "improve" the design of their rebuilt transmissions to prevent known internal problems from happening again, and the other upside is they have a warranty!

Jul 02, 2011 | 1997 Dodge Caravan

3 Answers

I replaced my cylinder head gasket.after putting everything together,i tried to start it but it won't.it cranks and backfires. i double checked everything and timed it several times by positioning the...


well try removing the distributor and spin it around half way 180 degrees then try. it seems you are off there are two ways to install the distributor because two turns for the crank equal one for the distributor.if still wont start call on me again i will help you .

Nov 14, 2010 | 1998 Chevrolet K1500

2 Answers

2002 1.9 sohc mp efi missing badly on #1 cylinder. new plug .wires,fuel filter.compression good.check engine light been on for several months showing egr fault. cleaned no help.installed another no...


Spray the intake manifold on cylinder number where it bolts to the head with intake cleaner and see if the rpm's change and the miss goes away temporarily.There was a problem at the factory with the intake gasket being creased on cylinder number 1. This issue tends to be a lean misfire issue.

Nov 13, 2010 | 2002 Saturn S-Series

1 Answer

I need a new engine for a 1998 mazda b-3000 pick up i would like a quote on a new and rebuilt one.


Call the dealer or Jasper. I dont think you can buy a "new" one. all wil be remanufactured, and Jasper has a 3 year/ 100k warranty.

Jun 27, 2010 | 1998 Mazda Pickup

3 Answers

Where can i find a good rebuilt engine for 1990 Excel


You can buy rebuilt engines through your local auto parts store or look on-line for companies like Jasper. Also, some mail order auto parts dealers like JC Whitney sell engines.

Jan 29, 2010 | 1990 Hyundai Excel

1 Answer

I am looking for a 5.3 liter jasper motor breakdown of


Jasper engines are rebuilt by that company and are exactly the same as the engine made by the manufacturer. (ford is ford, chevy is chevy etc.) Therefore if you have a chevy engine built by jasper, then it is exactly the same as a chevy unless it was built to other non-factory specs (stroker crank, different compression pistons or performance cam) Without the original "sheet" on this, the only way to tell what's in there is by taking it apart and measuring it.

Jun 08, 2009 | 1999 Chevrolet K1500

2 Answers

2000 Toyota Camry LE - engined blown - should I fix?


Hi...
On your coment.
I'm a mechanic...
To decide for a USED engine Or REBUILT engine.
The Difference 1- is the Price
On used How many miles have the USED engine
How was the maintenance on the Engine. ( Never know)
The warranty Used only 30 days.
But is the Cheap option. depend of your money.

JASPER is ONE of the BETTER ENGINE and TRANS. Rebuilder company.
They have 2 warrantys, One 36,000 miles,
The other ONE is 72,000, wrote on papers.
They give to you A complete warranty.
If the ENGINE fail During the Warranty time. they will give to you an other engine, and pay for the Labor to Remove and Install the Second Engine.
If you do with JASPER ASK to the Installer for the Warranty papers if he buyit.


OK. O hope this help on your question.
Thank you for use fixya ...

Sep 19, 2008 | 2000 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...