Question about 2005 Ford Focus

1 Answer

Wiring diagram for ford focus 2005 ghia 1.6

My boot will not open cos there are 6 black wires that are broken need help to re-connect

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

If you know which wires they are, ask an electrician to "but-splice" the wires back together.
Or if you think yourself wise enough to handle the situation, go buy, wire-strippers, **** splices and a crimper for those wire splices.
MAKE SURE YOU GET THE RIGHT SPLICES FOR THE GAUGE WIRE.
Strip the ends of either wire(you only need to strip about a1/4 inch), twist them CLOCKWISE, place them in the **** splice, and crimp the ends, and PRESTO! wire has continuity.
Make sure you splice the right wires together, or you will have blown fuses, and things not operating correctly.

Posted on Oct 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

None of windows are working changed door switch still nothing


Are you check fuses and voltage? Also I suggest check ground.

Apr 14, 2011 | 1999 Mercury Mountaineer

1 Answer

Power windows don't work on all 4 doors and power lock doesn't work on the driver door. 2004 jeep grand cherokee


On the driver side, the window/door lock module has the power lead either pulling away from the connection or has broke entirely. Another common cause is the wire harness between the door jam, this is the area that has a rubber boot covering the wires and from opening and closing the door, it creates a broken or loose connection over time. Open the driver side door, grab the rubber boot that the wires run thru, and move it around. Some times this will help create the connection and restore the power. If not, the door panel will need to be removed to inspect the wire connections.

Dec 31, 2010 | 2004 Jeep Grand Cherokee

6 Answers

Power door locks and windows dont work, interior lights stay on thinking driver side door is open


CHeck the black wire in between the door and frame. There is a cluster of wires in a rubber boot. Guaranteed that the black wire is broken. Splice it back together.

Feb 20, 2010 | 2004 Jeep Grand Cherokee

2 Answers

Driver Door Module. No power to windows


There is more than likely a broken wire in the boot inside the door on the driver's side. Just pull it back and you will be able to see if there is a broken wire, if so, just use a crimp connector and it will fix it.

Nov 09, 2009 | 2004 Jeep Grand Cherokee

1 Answer

I need the diagram to put the spark plug cables


2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
Spark Plug Wires - Removal & Installation

3.5L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  2. Remove the intake manifold cover, if required.
  3. Disconnect the left side spark plug wires from the spark plugs.
  4. Disconnect the left side spark plug wires from the ignition coil.
  5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
  6. Remove the spark plug wire assembly.
  7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
  8. Disconnect the right side spark plug wires from the spark plugs.
  9. Disconnect the right side spark plugs from the ignition coils.
  10. Remove the spark plug wire assembly.
  11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
To install:
  1. Install the spark plug wire assembly.
  2. Connect the right side spark plugs to the ignition coils.
  3. Connect the right side spark plug wires to the spark plugs.
  4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
  5. Install the spark plug wire assembly.
  6. Connect the left side spark plug wires to the spark plugs.
  7. Connect the left side spark plug wires to the ignition coil.
  8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
  9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
  10. Install the intake manifold cover, if required.

Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
74d742b.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
306b531.jpg


Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
9313fa7.jpg


Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
2c9af72.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
d929c16.jpg


Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
f357cd3.jpg

Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
09e9db9.jpg

I really hope help you with this (remember rated this help) Good luck.

Sep 23, 2009 | 2003 Chevrolet Malibu

3 Answers

Power windows, mirror, door locks inop. also have had ro replace every window motor in my 04 jeep


That happened to my jeep to so when i opened the door an looked where the wires were @ int hat black rubber thing i had a wire snapped i put em back together an everything worked great so jus check your wires it could be somethin that simple!

Jun 30, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Need to manually open trunk


Do the power window buttons and lock/unlock buttons work on your drivers door? If not you probably have a broken wire in the black boot going from the chassis to the drivers door. Pull the boot back from the door and you'll find a wire broken. Add a piece of wire and solder back together and wrap in black tape or heatshrink and replace boot. Then your unlock button should open rear hatch. Hope this is your problem because it is an easy fix.

May 19, 2009 | 2004 Jeep Grand Cherokee

6 Answers

I have a 2004 Jeep Grand Cherokee limited edition and the drivers door control panel doesnt work at all(power windows, locks,mirrors) The controls on the other doors for the windows dont work either but...


I had same problem it is a ground wire broken in the harness rubber boot between dthe driver door. Peel back the rubber that protects wires and you will find broken ground wire(black) add a piece of wire solder and wrap with electrical tape put rubber boot back into door everything should work.

Mar 15, 2009 | 2004 Jeep Grand Cherokee

17 Answers

Power windows, door locks and mirrors inop.


Sounds familiar - I pulled the rubber boot back and found the black wire was broken. I stripped the wires and put on a couple bullet connectors (terminators) and all is good. Just wish I would have seen this post before I took the door panel off... Oh well...

May 21, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2005 Ford Focus Logo

Related Topics:

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...