Question about 1992 Geo Storm

1 Answer

Need to replace windshield sprayer on 1992 geo storm

Sprayer broke when tube was pulled out to check why sprayer was not spraying water on the window

Posted by on

  • brendavid Oct 07, 2008

    this doesn't really tell me what i wanted to know does the rubber part under the hood turn to come off or pull off or what. the pump is working fine. I found some gunk in the hoses which i removed and when the hose is removed from the sprayer the water comes out great.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Geo Master
  • 5,568 Answers

Many are just force-fitted in the holes in which they are mounted. There is no stress to speak of on them so little reason to pop out - well, unless someone is unnecessarily pulling on the connecting tube.

Removing the old and installing a new one wojuld be better done when the hood is warm to prevent breaking the replacement when inserting it.
BTW; is the pump motor running at all? These are the pits as motors or pumps so could fail easily. 

Posted on Oct 07, 2008

  • Steve Allison
    Steve Allison Oct 07, 2008

    I assumed that 'force-fitted' was self-explanatory, sorry.

    The phrase indicates that it is not a threaded device, therefore, pushed into place.
    Sometimes, there is a thin piece of spring steel with a hole that is pushed over the underhood portion of the jet and provides a little more security but that is seldom seen and not needed if the jet and the hole in the hood (or cowling) is properly sized..  



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to check/replace rear Windshield sprayer tube?

What car, year,model etc would help for a start.

Oct 23, 2014 | Cars & Trucks

2 Answers

Volvo c70 windshield sprayer not working

Try disconnecting the tubes from the spray head (under the hood). The press spray button, if nothing comes out, you have a bad pump. It liquid is pumped, then you need to clean or replace the spray heads - they are clogged or damaged

Sep 04, 2014 | 2009 Volvo C70

2 Answers

Windshield sprayer won't work on LR3

Check the fuse first - replace if blown
If that does not fix it, pull the tubes off the spray outlets in the hood to see if fluid come out of the hoses when the switch is used, If it does, the problem will be blocked jets - probably with wax.
If nothing comes out of the tubes, you have a failed washer pump OR a fault in the wiring. The latter can be checked with a probe or multimeter. There should be 12+ volts on the positive side. Also check the ground wire with the ohmeter - a common fault

Jan 14, 2014 | Land Rover LR3 Cars & Trucks

3 Answers

I oown a 1999 jeep grand cherokee laredo replaced front windshield wiper pump on resevoir but still no fluid to windshield and i can hear pump.what is my next step.

the hose going from pump to sprayer could be cloged or the sprayer it self is get small wire to unclog sprayer and check hose

Jan 19, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Does a 1992 geo storm have an interfierance engine

If the timing belt broke, expect to replace some of the valves. It does not have a zero interference motor.

Sep 02, 2010 | 1990 Geo Storm

1 Answer

Dead plug cylinders

You might want to check the firing order to see if its correct.

Jul 27, 2010 | 1992 Geo Storm

2 Answers

I have a 1998 chrysler concord and i can get windsheild washer fluid to spray the resevoir is full no fluid is leaking out the wipers activate upon initiating the spray sequence but no fluid comes out

Pull out the small tube connected to the jet the fluid comes out of and check for any kind of debris, after blowing out the tube try and activate washer before you connect the hose again if no fluid comes out of the tube than that replace the small pump connected to the resivoir thay are about $15.00

Nov 29, 2009 | 1998 Chrysler Concorde

2 Answers

Windshield Water Spray

pull hose off sprayer and check for water pressure if pump is pumping water then jet is blocked use a small sowing needle in the jet to unblock jet dirty water blockes them get someone to hold the swich down while u do this wear saftey glasses when u do this u dont want dirt in your eyes


Dec 16, 2008 | 2004 Acura MDX

1 Answer

1992 geo strom

sounds like what was happening with mine. my fuel injectors were clogged...maybe that could be the problem with yours too?

Jun 28, 2008 | 1992 Geo Storm

Not finding what you are looking for?
1992 Geo Storm Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides